TI TRS3386ECPWR

TRS3386E
RS-232 TRANSCEIVER
WITH SPLIT SUPPLY PIN FOR LOGIC SIDE
www.ti.com
SLLS829A – APRIL 2007 – REVISED APRIL 2007
FEATURES
•
•
•
•
•
•
•
VL Pin for Compatibility With Mixed-Voltage
Systems Down to 1.8 V on Logic Side
Enhanced ESD Protection on RIN Inputs and
DOUT Outputs
– ±15-kV Human-Body Model
– ±15-kV IEC 61000-4-2, Air-Gap Discharge
– ±8-kV IEC 61000-4-2, Contact Discharge
Low 300-µA Supply Current
Specified 250-kbps Data Rate
1-µA Low-Power Shutdown
Meets EIA/TIA-232 Specifications Down
to 3 V
Designed to be Interchangeable With Industry
Standard '3386 Devices
PW OR DW PACKAGE
TOP VIEW
C1+
1
20
PWRDOWN
V+
2
19
VCC
C1−
3
18
GND
C2+
4
17
DOUT1
C2−
5
16
DOUT2
V−
6
15
DOUT3
DIN1
7
14
RIN1
DIN2
8
13
RIN2
9
12
VL
10
11
ROUT1
DIN3
ROUT2
•
•
•
•
•
Hand-Held Equipment
PDAs
Cell Phones
Battery-Powered Equipment
Data Cables
DESCRIPTION/ORDERING INFORMATION
The TRS3386E is a three-driver and two-receiver RS-232 interface device, with split supply pins for mixed-signal
operations. All RS-232 inputs and outputs are protected to ±15 kV using the IEC 61000-4-2 Air-Gap Discharge
method, ±8 kV using the IEC 61000-4-2 Contact Discharge method, and ±15 kV using the Human-Body Model.
The charge pump requires only four small 0.1-µF capacitors for operation from a 3.3-V supply. The TRS3386E is
capable of running at data rates up to 250 kbps, while maintaining RS-232-compliant output levels.
The TRS3386E has a unique VL pin that allows operation in mixed-logic voltage systems. Both driver in (DIN)
and receiver out (ROUT) logic levels are pin programmable through the VL pin. The TRS3386E is available in a
space-saving thin shrink small-outline package (TSSOP).
ORDERING INFORMATION
TA
0°C to 70°C
–40°C to 85°C
(1)
(2)
PACKAGE (1) (2)
ORDERABLE PART NUMBER
TOP-SIDE MARKING
TSSOP – PW
TRS3386ECPWR
RV86EC
SOIC – DW
TRS3386ECDWR
TRS3386EC
TSSOP – PW
TRS3386EIPWR
RV86EI
SOIC – DW
TRS3386EIDWR
TRS3386EI
Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
website at www.ti.com.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCT PREVIEW information concerns products in the
formative or design phase of development. Characteristic data and
other specifications are design goals. Texas Instruments reserves
the right to change or discontinue these products without notice.
Copyright © 2007, Texas Instruments Incorporated
PRODUCT PREVIEW
APPLICATIONS
TRS3386E
RS-232 TRANSCEIVER
WITH SPLIT SUPPLY PIN FOR LOGIC SIDE
www.ti.com
SLLS829A – APRIL 2007 – REVISED APRIL 2007
TRUTH TABLE (SHUTDOWN FUNCTION)
PWRDWN
DRIVER
OUTPUTS
RECEIVER OUTPUTS
CHARGE PUMP
L
High-Z
High-Z
Inactive
H
Active
Active
Active
FUNCTIONAL BLOCK DIAGRAM
DIN1
DIN1
DIN2
PRODUCT PREVIEW
PWRDOWN
ROUT1
7
17
8
16
9
15
20
DOUT1
DOUT2
DOUT3
Powerdown
11
14
RIN1
5K
ROUT2
10
13
5K
2
Submit Documentation Feedback
RIN2
TRS3386E
RS-232 TRANSCEIVER
WITH SPLIT SUPPLY PIN FOR LOGIC SIDE
www.ti.com
SLLS829A – APRIL 2007 – REVISED APRIL 2007
TERMINAL FUNCTIONS
TERMINAL
DESCRIPTION
NO.
C1+
1
Positive terminal of the voltage-doubler charge-pump capacitor
V+
2
5.5-V supply generated by the charge pump
C1–
3
Negative terminal of the voltage-doubler charge-pump capacitor
C2+
4
Positive terminal of the inverting charge-pump capacitor
C2–
5
Negative terminal of the inverting charge-pump capacitor
V–
6
–5.5-V supply generated by the charge pump
DIN1
DIN2
DIN3
7
8
9
Driver inputs
ROUT2
ROUT1
10
11
Receiver outputs. Swing between 0 and VL.
VL
12
Logic-level supply. All CMOS inputs and outputs are referenced to this supply.
RIN2
RIN1
13
14
RS-232 receiver inputs
DOUT3
DOUT2
DOUT1
15
16
17
RS-232 driver outputs
GND
18
Ground
VCC
19
3-V to 5.5-V supply voltage
PWRDWN
20
Powerdown input
L = Powerdown
H = Normal operation
Absolute Maximum Ratings (1)
over operating free-air temperature range (unless otherwise noted)
MIN
–0.3
6
V
VL to GND
–0.3
VCC + 0.3
V
V+ to GND
–0.3
7
V
V– to GND
0.3
–7
V
13
V
V+ + |V–| (2)
VI
Input voltage
VO
Output voltage
DIN, PWRDWN to GND
–0.3
±13.2
DOUT to GND
ROUT
Continuous power dissipation
TJ
Junction temperature
Tstg
Storage temperature range
–0.3
VL + 0.3
V
V
Continuous
TA = 70°C, 20-pin TSSOP
(derate 7 mW/°C above 70°C)
–65
Lead temperature (soldering, 10 s)
(2)
6
±25
RIN to GND
Short-circuit duration DOUT to GND
(1)
MAX UNIT
VCC to GND
559
mW
150
°C
150
°C
300
°C
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the
specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
V+ and V– can have maximum magnitudes of 7 V, but their absolute difference cannot exceed 13 V.
Submit Documentation Feedback
3
PRODUCT PREVIEW
NAME
TRS3386E
RS-232 TRANSCEIVER
WITH SPLIT SUPPLY PIN FOR LOGIC SIDE
www.ti.com
SLLS829A – APRIL 2007 – REVISED APRIL 2007
Recommended Operating Conditions
MIN
MAX
UNIT
VCC
Supply voltage
3
5.5
V
VL
Supply voltage
1.65
VCC
V
Input logic threshold low
Input logic threshold high
DIN, PWRDWN
DIN, PWRDWN
VL = 3 V or 5.5 V
0.8
VL = 2.3 V
0.6
VL = 1.65 V
0.5
VL = 5.5 V
2.4
VL = 3 V
2.0
VL = 2.7 V
1.4
VL = 1.95 V
0.9
TRS3386ECPWR
Operating temperature
TRS3386EIPWR
Receiver input voltage
V
V
0
70
–40
85
–25
25
°C
V
Electrical Characteristics
PRODUCT PREVIEW
over operating free-air temperature range, VCC = VL = 3 V to 5.5 V, C1–C4 = 0.1 µF (tested at 3.3 V ± 10%), C1 = 0.047 µF,
C2–C4 = 0.33 µF (tested at 5 V ± 10%) (unless otherwise noted)
PARAMETER
TEST CONDITIONS
MIN
TYP (1)
MAX
1
10
µA
0.3
1
mA
UNIT
DC Characteristics (VCC = 3.3 V or 5 V, TA = 25°C)
Powerdown supply current
PWRDWN = GND, All inputs at VCC or GND
Supply current
PWRDWN = VCC, No load
(1)
Typical values are at VCC = VL = 3.3 V, TA = 25°C.
ESD Protection
PARAMETER
RIN, DOUT
4
TEST CONDITIONS
TYP
Human-Body Model
±15
IEC 61000-4-2 Air-Gap Discharge
±15
IEC 61000-4-2 Contact Discharge
±8
Submit Documentation Feedback
UNIT
kV
TRS3386E
RS-232 TRANSCEIVER
WITH SPLIT SUPPLY PIN FOR LOGIC SIDE
www.ti.com
SLLS829A – APRIL 2007 – REVISED APRIL 2007
RECEIVER SECTION
Electrical Characteristics
over operating free-air temperature range, VCC = VL = 3 V to 5.5 V, C1–C4 = 0.1 µF (tested at 3.3 V ± 10%), C1 = 0.047 µF,
C2–C4 = 0.33 µF (tested at 5 V ± 10%), TA = TMIN to TMAX (unless otherwise noted)
PARAMETER
TEST CONDITIONS
Ioff
Output leakage current
ROUT, receivers disabled
VOL
Output voltage low
IOUT = 1.6 mA
VOH
Output voltage high
IOUT = –1 mA
VIT–
Input threshold low
TA = 25°C
VIT+
Input threshold high
TA = 25°C
Vhys
Input hysteresis
Input resistance
(1)
MIN
TYP (1)
MAX
UNIT
±0.05
±10
µA
0.4
V
VL – 0.6
VL – 0.1
VL = 5 V
0.8
1.2
VL = 3.3 V
0.6
1.5
V
V
VL = 5 V
1.8
2.4
VL = 3.3 V
1.5
2.4
0.5
TA = 25°C
3
5
V
V
7
kΩ
Typical values are at VCC = VL = 3.3 V, TA = 25°C
Switching Characteristics
PARAMETER
tPHL
Receiver propagation delay
tPLH
TEST CONDITIONS
Receiver input to receiver output, CL = 150 pF
TYP (1)
0.15
0.15
UNIT
µs
tPHL – tPLH
Receiver skew
50
ns
ten
Receiver output enable time
From PWRDWN
200
ns
tdis
Receiver output disable time
From PWRDWN
200
ns
(1)
PRODUCT PREVIEW
over operating free-air temperature range, VCC = VL = 3 V to 5.5 V, C1–C4 = 0.1 µF (tested at 3.3 V ± 10%), C1 = 0.047 µF,
C2–C4 = 0.33 µF (tested at 5 V ± 10%), TA = TMIN to TMAX (unless otherwise noted)
Typical values are at VCC = VL = 3.3 V, TA = 25°C.
Submit Documentation Feedback
5
TRS3386E
RS-232 TRANSCEIVER
WITH SPLIT SUPPLY PIN FOR LOGIC SIDE
www.ti.com
SLLS829A – APRIL 2007 – REVISED APRIL 2007
DRIVER SECTION
Electrical Characteristics
over operating free-air temperature range, VCC = VL = 3 V to 5.5 V, C1–C4 = 0.1 µF (tested at 3.3 V ± 10%), C1 = 0.047 µF,
C2–C4 = 0.33 µF (tested at 5 V ± 10%), TA = TMIN to TMAX (unless otherwise noted)
PARAMETER
TEST CONDITIONS
MIN
TYP (1)
±5
±5.4
V
300
10M
Ω
MAX
UNIT
VOH
Output voltage swing
All driver outputs loaded with 3 kΩ to ground
rO
Output resistance
VCC = V+ = V– = 0, Driver output = ±2 V
IOS
Output short-circuit current
VT_OUT = 0
±60
mA
IOZ
Output leakage current
VT_OUT = ±12 V, Driver disabled,
VCC = 0 or 3 V to 5.5 V
±25
µA
Driver input hysteresis
Input leakage current
(1)
±0.01
DIN, PWRDWN
0.5
V
±1
µA
Typical values are at VCC = VL = 3.3 V, TA = 25°C
Timing Requirements
over operating free-air temperature range, VCC = VL = 3 V to 5.5 V, C1–C4 = 0.1 µF (tested at 3.3 V ± 10%), C1 = 0.047 µF,
C2–C4 = 0.33 µF (tested at 5 V ± 10%), TA = TMIN to TMAX (unless otherwise noted)
PRODUCT PREVIEW
PARAMETER
|tPHL– tPLH|
Maximum data rate
RL = 3 kΩ, CL = 1000 pF, One driver switching
Time-to-exit powerdown
|VT_OUT| > 3.7 V
TYP (1)
MAX
250
µs
100
VCC = 3.3 V,
TA = 25°C,
RL = 3 kΩ to 7 kΩ,
Measured from 3 V
to –3 V or –3 V to 3 V
UNIT
kbps
100
Driver skew (2)
Transition-region
slew rate
(1)
(2)
MIN
ns
CL = 150 pF to 1000 pF
6
30
CL = 150 pF to 2500 pF
4
30
V/µs
Typical values are at VCC = VL = 3.3 V, TA = 25°C.
Driver skew is measured at the driver zero crosspoint.
ESD Protection
PARAMETER
RIN, DOUT
6
TEST CONDITIONS
TYP
Human-Body Model
±15
IEC 61000-4-2 Air-Gap Discharge
±15
IEC 61000-4-2 Contact Discharge
±8
Submit Documentation Feedback
UNIT
kV
TRS3386E
RS-232 TRANSCEIVER
WITH SPLIT SUPPLY PIN FOR LOGIC SIDE
www.ti.com
SLLS829A – APRIL 2007 – REVISED APRIL 2007
APPLICATION INFORMATION
3.3 V
20
CBYPASS
C1
0.1mF
C2
0.1mF
TTL/CMOS
Inputs
19
12
PWRDWN V CC
1 C1+
3
VL
V+
2
C3
0.1µF
C1−
4 C2+
5
C2−
V−
6
7 DIN1
DOUT1 17
DIN2
DOUT2 16
DIN3
DOUT3 15
C4
0.1 µF
VL
RIN1 14
11 ROUT1
5kΩ
TTL/CMOS
Outputs
VL
10 ROUT2
PRODUCT PREVIEW
RIN2 13
5kΩ
GND
18
Submit Documentation Feedback
7
TRS3386E
RS-232 TRANSCEIVER
WITH SPLIT SUPPLY PIN FOR LOGIC SIDE
www.ti.com
SLLS829A – APRIL 2007 – REVISED APRIL 2007
PARAMETER MEASUREMENT INFORMATION
3V
Input
Generator
(see Note B)
1.5 V
RS-232
Output
50 Ω
RL
1.5 V
0V
CL
(see Note A)
tTHL
3V
PWRDWN
tTLH
VOH
3V
3V
Output
−3 V
−3 V
VOL
TEST CIRCUIT
VOLTAGE WAVEFORMS
SR(tr) +
t
THL
6V
or t
TLH
NOTES: A. CL includes probe and jig capacitance.
B. The pulse generator has the following characteristics: PRR = 250 kbit/s, ZO = 50 Ω, 50% duty cycle,
tr ≤ 10 ns, tf ≤ 10 ns.
Figure 1. Driver Slew Rate
PRODUCT PREVIEW
3V
Generator
(see Note B)
RS-232
Output
50 Ω
RL
Input
1.5 V
1.5 V
0V
CL
(see Note A)
tPHL
tPLH
VOH
3V
PWRDWN
50%
50%
Output
VOL
TEST CIRCUIT
VOLTAGE WAVEFORMS
NOTES: A. CL includes probe and jig capacitance.
B. The pulse generator has the following characteristics: PRR = 250 kbit/s, ZO = 50 Ω, 50% duty cycle, tr ≤ 10 ns, tf ≤ 10 ns.
Figure 2. Driver Pulse Skew
PWRDWN
3V
3V
Input
1.5 V
1.5 V
−3 V
Output
Generator
(see Note B)
50 Ω
tPHL
CL
(see Note A)
tPLH
VOH
50%
Output
50%
VOL
TEST CIRCUIT
VOLTAGE WAVEFORMS
NOTES: A. CL includes probe and jig capacitance.
B. The pulse generator has the following characteristics: ZO = 50 Ω, 50% duty cycle, tr ≤ 10 ns, tf ≤ 10 ns.
Figure 3. Receiver Propagation Delay Times
8
Submit Documentation Feedback
TRS3386E
RS-232 TRANSCEIVER
WITH SPLIT SUPPLY PIN FOR LOGIC SIDE
www.ti.com
SLLS829A – APRIL 2007 – REVISED APRIL 2007
PARAMETER MEASUREMENT INFORMATION (Continued)
VCC
GND
S1
RL
3 V or 0 V
Output
CL
(see Note A)
PWRDWN
3V
Input
1.5 V
0V
tPZH
(S1 at GND)
tPHZ
S1 at GND)
VOH
Output
50%
0.3 V
Generator
(see Note B)
1.5 V
50 Ω
tPLZ
(S1 at VCC)
0.3 V
Output
50%
VOL
tPZL
(S1 at VCC)
TEST CIRCUIT
VOLTAGE WAVEFORMS
PRODUCT PREVIEW
NOTES: A. CL includes probe and jig capacitance.
B. The pulse generator has the following characteristics: ZO = 50 Ω, 50% duty cycle, tr ≤ 10 ns, tf ≤ 10 ns.
Figure 4. Receiver Enable and Disable Times
Submit Documentation Feedback
9
PACKAGE OPTION ADDENDUM
www.ti.com
26-Sep-2007
PACKAGING INFORMATION
Orderable Device
Status (1)
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
TRS3386ECDW
ACTIVE
SOIC
DW
20
25
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TRS3386ECDWG4
ACTIVE
SOIC
DW
20
25
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TRS3386ECDWR
ACTIVE
SOIC
DW
20
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TRS3386ECDWRG4
ACTIVE
SOIC
DW
20
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TRS3386ECPW
ACTIVE
TSSOP
PW
20
70
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TRS3386ECPWG4
ACTIVE
TSSOP
PW
20
70
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TRS3386ECPWR
ACTIVE
TSSOP
PW
20
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TRS3386ECPWRG4
ACTIVE
TSSOP
PW
20
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TRS3386EIDW
ACTIVE
SOIC
DW
20
25
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TRS3386EIDWG4
ACTIVE
SOIC
DW
20
25
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TRS3386EIDWR
ACTIVE
SOIC
DW
20
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TRS3386EIDWRG4
ACTIVE
SOIC
DW
20
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TRS3386EIPW
ACTIVE
TSSOP
PW
20
70
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TRS3386EIPWG4
ACTIVE
TSSOP
PW
20
70
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TRS3386EIPWR
ACTIVE
TSSOP
PW
20
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TRS3386EIPWRG4
ACTIVE
TSSOP
PW
20
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
Lead/Ball Finish
MSL Peak Temp (3)
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
26-Sep-2007
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com
11-Mar-2008
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
TRS3386ECDWR
SOIC
TRS3386ECPWR
TRS3386EIDWR
TRS3386EIPWR
SPQ
Reel
Reel
Diameter Width
(mm) W1 (mm)
A0 (mm)
B0 (mm)
K0 (mm)
P1
(mm)
W
Pin1
(mm) Quadrant
13.0
2.7
12.0
24.0
Q1
DW
20
2000
330.0
24.4
10.8
TSSOP
PW
20
2000
330.0
16.4
6.95
7.1
1.6
8.0
16.0
Q1
SOIC
DW
20
2000
330.0
24.4
10.8
13.0
2.7
12.0
24.0
Q1
TSSOP
PW
20
2000
330.0
16.4
6.95
7.1
1.6
8.0
16.0
Q1
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
11-Mar-2008
*All dimensions are nominal
Device
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
TRS3386ECDWR
SOIC
DW
20
2000
346.0
346.0
41.0
TRS3386ECPWR
TSSOP
PW
20
2000
346.0
346.0
33.0
TRS3386EIDWR
SOIC
DW
20
2000
346.0
346.0
41.0
TRS3386EIPWR
TSSOP
PW
20
2000
346.0
346.0
33.0
Pack Materials-Page 2
MECHANICAL DATA
MTSS001C – JANUARY 1995 – REVISED FEBRUARY 1999
PW (R-PDSO-G**)
PLASTIC SMALL-OUTLINE PACKAGE
14 PINS SHOWN
0,30
0,19
0,65
14
0,10 M
8
0,15 NOM
4,50
4,30
6,60
6,20
Gage Plane
0,25
1
7
0°– 8°
A
0,75
0,50
Seating Plane
0,15
0,05
1,20 MAX
PINS **
0,10
8
14
16
20
24
28
A MAX
3,10
5,10
5,10
6,60
7,90
9,80
A MIN
2,90
4,90
4,90
6,40
7,70
9,60
DIM
4040064/F 01/97
NOTES: A.
B.
C.
D.
All linear dimensions are in millimeters.
This drawing is subject to change without notice.
Body dimensions do not include mold flash or protrusion not to exceed 0,15.
Falls within JEDEC MO-153
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Amplifiers
Data Converters
DSP
Clocks and Timers
Interface
Logic
Power Mgmt
Microcontrollers
RFID
RF/IF and ZigBee® Solutions
amplifier.ti.com
dataconverter.ti.com
dsp.ti.com
www.ti.com/clocks
interface.ti.com
logic.ti.com
power.ti.com
microcontroller.ti.com
www.ti-rfid.com
www.ti.com/lprf
Applications
Audio
Automotive
Broadband
Digital Control
Medical
Military
Optical Networking
Security
Telephony
Video & Imaging
Wireless
www.ti.com/audio
www.ti.com/automotive
www.ti.com/broadband
www.ti.com/digitalcontrol
www.ti.com/medical
www.ti.com/military
www.ti.com/opticalnetwork
www.ti.com/security
www.ti.com/telephony
www.ti.com/video
www.ti.com/wireless
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2008, Texas Instruments Incorporated