T H AT Corporation Low-Noise Matched Transistor Array ICs THAT 300 Series FEATURES APPLICATIONS 4 Matched NPN Transistors (300) 4 Matched PNP Transistors (320) 2 Matched NPNs and PNPs (340) 4 Matched NP6N - 4 Matched PNP (380) · Microphone Preamplifiers · Current Sources · Monolithic Construction · Current Mirrors · Low Noise - 0.75 nV Hz (PNP) - 0.8 nV Hz (NPN ) · Log/Antilog Amplifiers · High Speed - fT = 350 MHz (NPN) - fT = 325 MHz (PNP) · Multipliers · Servos · · Excellent Matching – 500 mV typical between devices of same gender · Dielectrically Isolated · 36V VCEO DESCRIPTION The THAT300 Series ICs are large-geometry monolithic NPN and/or PNP transistor arrays which combine low noise, high speed and excellent parametric matching between devices of the same gender. The large geometries typically result in 25 W base spreading resistance for the PNP devices (30 W for the NPNs), producing 0.75 nV Hz voltage noise (0.8 nV Hz for the NPNs). This makes the 300 Series an ideal choice for low-noise amplifier input stages. Fabricated on a Complementary Bipolar Dielectrically Isolated process, each transistor is electri- Part Number cally isolated from the others by a layer of insulating oxide. The resulting low collector-to-substrate capacitance produces a typical NPN fT of 350 MHz, 325 MHz for the PNPs. This delivers ac performance similar to discrete 2N3904- and 2N3906-class devices. Dielectric isolation also minimizes crosstalk and provides complete DC isolation. Substrate biasing is not required for normal operation, though the substrate should be grounded to optimize speed and minimize inter-device crosstalk. The monolithic construction assures excellent parameter matching and tracking over temperature. Configuration Package THAT300P DIP14 4-Matched NPN Transistors THAT300S SO14 THAT320P DIP14 4- Matched PNP Transistors THAT320S THAT340P THAT340S THAT380G SO14 DIP14 2 Matched NPN Transistors and 2 Matched PNP Transistors 4 Matched NPN Transistors and 4 Matched PNP Transistors SO14 Individual Die Table 1. Ordering Info THAT Corporation; 45 Sumner Street; Milford, Massachusetts 01757-1656; USA Tel: +1 508 478 9200; Fax: +1 508 478 0990; Web: www.thatcorp.com Page 2 THAT300 Series Transistor Arrays SPECIFICATIONS 1 Maximum Ratings (T A = 25°C) Parameter Symbol Conditions Min Typ Max Units NPN Collector-Emitter Voltage BVCEO IC = 1 mAdc, IB = 0 36 40 — V NPN Collector-Base Voltage BVCBO IC =10 mAdc, IE=0 36 40 — V NPN Emitter-Base Voltage BVEBO IE = 100 mAdc, IC = 0 5 — — V NPN Collector Current IC MAX 10 20 mA NPN Emitter Current IE MAX 10 20 mA PNP Collector-Emitter Voltage BVCEO IC = 1 mAdc, IB = 0 –36 –40 — V PNP Collector-Base Voltage BVCBO IC = 10 mAdc, IE = 0 –36 –40 — V PNP Emitter-Base Voltage BVEBO IE = 100 mAdc, IC = 0 –5 — — V PNP Collector Current IC MAX –10 –20 mA PNP Emitter Current IE MAX –10 –20 mA Collector-Collector Voltage BVCC ±100 ±200 — V Emitter-Emitter Voltage BVEE ±100 ±200 — V TA 0 70 °C 150 °C 125 °C Operating Temperature Range Maximum Junction Temperature TJMAX Storage Temperature TSTORE -45 THAT 300 14 1 2 Q1 Q2 3 4 SUB SUB 5 6 THAT 320 Q3 Q4 7 Fig 1. 300 Pinout 14 1 13 2 12 3 11 4 10 5 9 6 8 7 Q1 Q2 13 12 SUB SUB 11 10 Q3 Q4 9 8 Fig 2. 320 Pinout THAT Corporation; 45 Sumner Street; Milford, Massachusetts 01757-1656; USA Tel: +1 508 478 9200; Fax: +1 508 478 0990; Web: www.thatcorp.com 600041 Rev B Page 3 SPECIFICATIONS 1 (Cont’d) THAT 340 1 14 2 13 Q1 Q2 3 4 Q1 E 11 SUB 5 Q3 7 Q2 B Q1 PNP Q2 PNP Q3 E Q3 NPN Q4 NPN Q4 B Q4 E THAT 312 Q5 E Q5 NPN Q6 NPN Q6 E Q5 B Q7 PNP Q8 PNP Q6 B Q5 C 8 Q2 E Q4 C Q3 B 9 Q4 Q2 C GKH YK 10 6 Q1 C Q3 C 12 SUB Q1 B Q7 E Q6 C 17C1 18B Q7 B Q7 C Q8 C Q8 B Q8 E Fig 4. 380 Die layout Fig 3. 340 Pinout NPN Electrical Characteristics 2 Parameter NPN Current Gain Symbol Conditions Min Typ Max hfe VCB = 10 V IC = 1 mA 60 100 — 100 — IC = 10 mA NPN Current Gain Matching Dhfe VCB = 10 V, IC = 1 mA — 5 — NPN Noise Voltage Density eN VCB = 10 V, IC = 1 mA, 1 kHz — 0.8 — NPN Gain-Bandwidth Product fT IC = 1 mA, VCB = 10 V 350 Units % nV Hz MHz NPN DVBE (THAT300: VBE1-VBE2 ;VBE3-VBE4) (THAT340: VBE1-VBE2) VOS IC = 1 mA — ±0.5 IC = 10 mA — ±0.5 ±3 mV mV NPN DIB (THAT300: IB1-IB2, IB3-IB4) (THAT340: IB1-VB2) IOS NPN Collector-Base Leakage Current ICBO IC = 1 mA — ±500 IC = 10 mA — ±5 ±1500 VCB = 25 V — 25 — pA nA nA NPN Bulk Resistance rBE VCB = 0 V, 10 mA < IC < 10 mA — 2 — W NPN Base Spreading Resistance rbb VCB = 10 V, IC = 1 mA — 30 — W NPN Collector Saturation Voltage VCE(SAT) IC = 1 mA, IB = 100mA — 0.05 V COB VCB = 10 V, IE = 0 mA, 100 kHz 3 pF 0.7 pF NPN Output Capacitance NPN Collector-CollectorCapacitance (THAT300: Q1-Q2, Q3-Q4) (THAT340: Q1-Q2) VCC = 0 V, 100 kHz CCC 1. All specifications subject to change without notice. 2. Unless otherwise noted, TA=25°C. THAT Corporation; 45 Sumner Street; Milford, Massachusetts 01757-1656; USA Tel: +1 508 478 9200; Fax: +1 508 478 0990; Web: www.thatcorp.com Page 4 THAT300 Series Transistor Arrays SPECIFICATIONS 1 (Cont’d) PNP Electrical Characteristics 2 Parameter PNP Current Gain Symbol Conditions Min hfe VCB = 10 V IC = 1 mA 50 IC = 10 mA Typ Max 75 — 75 — PNP Current Gain Matching Dhfe VCB = 10 V, IC = 1 mA — 5 — PNP Noise Voltage Density eN VCB = 10 V, IC = 1 mA, 1 kHz — 0.75 — PNP Gain-Bandwidth Product fT IC = 1 mA, VCB = 10 V 325 Units % nV Hz MHz PNP DVBE (THAT320: VBE1-VBE2; VBE3-VBE4) (THAT340: VBE3-VBE4) VOS IC = 1 mA — ±0.5 IC = 10 mA — ±0.5 ±3 mV mV PNP DIB (THAT320: IB1-IB2; IB3-IB4) (THAT340: IB3-IB4) IOS IC = 1 mA — ±700 IC = 10 mA — ±7 ±1800 nA nA PNP Collector-Base Leakage Current ICBO VCB = 25 V — –25 — pA PNP Bulk Resistance rBE VCB = 0 V, 10mA < IC< 10 mA — 2 — W PNP Base Spreading Resistance rbb VCB = 10 V, IC = 1 mA — 25 — W PNP Collector Saturation Voltage VCE(SAT) IC = 1 mA, IB = 100 mA — –0.05 V COB VCB = 10 V, IE = 0 mA, 100 kHz 3 pF 0.6 pF PNP Output Capacitance PNP Collector-Collector Capacitance (THAT320: Q1-Q2; Q3-Q4) (THAT340: Q3-Q4) CCC VCC = 0 V, 100 kHz Information furnished by THAT Corporation is believed to be accurate and reliable. However no responsibility is assumed by THAT Corporation for it’s use nor for any infringements of patents or other rights of third parties which may result from it’s use. LIFE SUPPORT POLICY THAT Corporation products are not designed for use in life support equipment where malfunction of such products can reasonably be expected to result in personal injury or death. The buyer uses or sells such products for life suport application at the buyer’s own risk and agrees to hold harmless THAT Corporation from all damages, claims, suits or expense resulting from such use. CAUTION: THIS IS AN ESD (ELECTROSTATIC DISCHARGE) SENSITIVE DEVICE. It can be damaged by the currents generated by electrostatic discharge. Static charge and therefore dangerous voltages can accumulate and discharge without detection causing a loss of function or performance to occur. The transistors in this device are unprotected in order to maximize performance and flexibility. They are more sensitive to ESD damage than many other ICs which include protection devices at their inputs. Note that all of the pins (not just the "inputs") are susceptible. Use ESD preventative measures when storing and handling this device. Unused devices should be stored in conductive packaging. Packaging should be discharged to the destination socket before the devices are removed. ESD damage can occur to these devices even after they are installed in a board-level assembly. Circuits should include specific and appropriate ESD protection. THAT Corporation; 45 Sumner Street; Milford, Massachusetts 01757-1656; USA Tel: +1 508 478 9200; Fax: +1 508 478 0990; Web: www.thatcorp.com 600041 Rev B Page 5 0.750±0.004 (19.05±0.10) 0.050 (1.27) Typ 0.25±.004 (6.35±0.10) 1 0.157 0.245 (3.99) (6.2) Max Max 0.30 ±0.02 (7.62 ±0.5) 0.060 (1.52) Typ. 1 0.125±0.004 (3.18±0.10) 0.018 (0.46) Max 0.018 (0.46) 0.069 (1.75) Max 0.344 (8.74) Max 0.010 (0.25) 0.10 Typ. (2.54) 0.075 (1.91) Note: qJA = 100 °C / W Note: qJA = 100 °C / W Figure 5. Dual-In-Line Package Outline Figure 6. Surface-Mount Package Outline 477.5 411.5 286.5 95.5 0 -95.5 THAT 312 -286.5 -411.5 -477.5 1613u 668.5 477.5 95.5 0 -95.5 GKH YK -286.5 -477.5 -668.5 90u Figure 7. Die dimensions THAT Corporation; 45 Sumner Street; Milford, Massachusetts 01757-1656; USA Tel: +1 508 478 9200; Fax: +1 508 478 0990; Web: www.thatcorp.com 1232u 17C1 18B 286.5 90u 0.010 (0.25) Max