05124 ET721 Only One Name Means ProTek’Tion™ STEERING DIODE ARRAY APPLICATIONS ✔ Ethernet - 10/100/1000 Base T ✔ Set Top Box Interfac ✔ Handheld Electronics ✔ FireWire ✔ USB Interface ✔ Sensor Interface IEC COMPATIBILITY (EN61000-4) SO-8 ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-4 (EFT): 40A - 5/50ns ✔ 61000-4-5 (Surge): 12A, 8/20µs - Level 1(Line-Gnd) & Level 2(Line-Line) FEATURES ✔ ESD Protection > 40 kilovolts ✔ Low Clamping Voltage ✔ Provides Six (6) Lines of Protection ✔ LOW LEAKAGE CURRENT < 200nA ✔ ULTRA LOW CAPACITANCE: 3pF Typical MECHANICAL CHARACTERISTICS ✔ Molded JEDEC SO-8 ✔ Weight 0.1 grams (Approximate) ✔ Flammability rating UL 94V-0 ✔ 12mm Tape and Reel Per EIA Standard 481 ✔ Marking: Marking Code, Logo, Date Code & Pin One Defined By Dot on Top of Package PIN CONFIGURATION 05124.R5 8/03 +VCC I/O 6 I/O 5 I/O 4 8 7 6 5 1 2 3 4 I/O 1 I/O 2 I/O 3 -VEE 1 www.protekdevices.com ET721 DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified SYMBOL VALUE UNITS TJ -55°C to 150°C °C Storage Temperature TSTG -55°C to 150°C °C Continuous Power Dissipation PPC 145 mW PARAMETER Operating Temperature ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER DEVICE MARKING STA ET721 MAXIMUM PEAK PULSE FORWARD CURRENT VRRM VOLTS 8/20µs @1A VF VOLTS 8/20µs IFM AMPS MAXIMUM REVERSE LEAKAGE CURRENT (See Note 2) @ VRRM IR nA 20 2 12 20 REPETITIVE PEAK REVERSE VOLTAGE (See Note 1) TYPICAL FORWARD VOLTAGE MAXIMUM QUIESCENT SUPPLY CURRENT (See Note 3) @20V IRQ nA TYPICAL CAPACITANCE 200 3 @0V, 1 MHz Cj pF Note 1: VRRM is +VCC for pin 8, -VEE for pin 4. Note 2: +20V from pin 8 to 1, 2, 3, 5, 6, and 7. -20V from pin 4 to 1, 2, 3, 5, 6 and 7. Note 3: +20V from pin 8 to 4. FIGURE 1 NON-REPETITIVE PEAK PULSE CURRENT CAPABILITY 120 IPP - Peak Pulse Current - % of IPP Peak Pulse Current - Amps 8 6 4 2 0 0.001 05124.R5 8/03 FIGURE 2 PULSE WAVE FORM tf 100 TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs Peak Value IPP 80 e-t 60 40 td = t I /2 PP 20 0 0.01 0.1 1 Square Wave Pulse - ms 10 100 2 0 5 10 15 t - Time - µs 20 25 30 www.protekdevices.com ET721 GRAPHS 200 Forward Current - mA 160 FIGURE 3 TYPICAL LOW CURRENT FORWARD VOLTAGE DROP TA = 25°C SINGLE PULSE See Figure 2 120 80 40 0 600 5 Forward Current - A 4 800 1,000 Forward Voltage Drop - mV 1,200 FIGURE 4 TYPICAL HIGH CURRENT FORWARD VOLTAGE DROP TA = 25°C SINGLE PULSE See Figure 2 3 2 1 0 0 05124.R5 8/03 1 2 Forward Voltage Drop - V 3 3 www.protekdevices.com ET721 PACKAGE OUTLINE & DIMENSIONS PACKAGE OUTLINE SO-8 -A- 8 5 -B- 0.010” (0.25 MM) P M B M 4 PL 1 PACKAGE DIMENSIONS 4 DIM D G C R X 45º 0º - 10º -TJ K 0.010” (0.25 MM) M T B S F A S 8 PL 4.80 3.80 1.35 0.35 0.40 1.27 BSC 0.18 0.10 5.80 0.25 INCHES MIN MAX 5.00 0.189 0.196 4.00 0.150 0.157 1.75 0.054 0.068 0.49 0.014 0.019 1.250 0.016 0.049 1.27 BSC 0.05 BSC 0.05 BSC 0.25 0.007 0.009 0.25 0.004 0.008 6.20 0.229 0.244 0.50 0.010 0.019 NOTES MOUNTING PAD 0.050” ± 0.005” A B C D F G J K P R MILLIMETERS MIN MAX 1. - T - = Seating Plane and Datum Surface. 2. Dimensions “A” and “B” are Datum. 3. Dimensions “A” and “B” do not include mold protrusion. 4. Maximum mold protrusion is 0.015” (0.380 mm) per side. 5. Dimensioning and tolerances per ANSI Y14.5M, 1982. 6. Dimensions are exclusive of mold flash and metal burrs. 0.030” ± 0.005” TAPE & REEL/BULK ORDERING NOMENCLATURE 0.160” ± 0.005” 1. Surface mount product is taped and reeled in accordance with EIA-481. 2. Suffix-T7 = 7 Inch Reel - 1,000 pieces per 12mm tape, i.e., ET721-T7. 3. Suffix-T13 = 13 Inch Reel - 2,500 pieces per 12mm tape, i.e., ET721-T13. 4. No Suffix = Product Shipped in Tubes of 98 pcs per Tube. 0.245” MIN 0.045” ± 0.005” Outline & Dimensions: Rev 1 - 11/01, 06009 COPYRIGHT © ProTek Devices 2003 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: [email protected] Web Site: www.protekdevices.com DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. 05124.R5 8/03 4 www.protekdevices.com