05080 PLC03-6 . . . engineered solutions for the transient environment™ TELECOM DIODE BRIDGE/ TVS ARRAY APPLICATIONS ✔ T1/E1 & T3/E3 Line Cards ✔ ISDN U-Interfaces & ISDN S/T Interfaces ✔ xDSL Interfaces ✔ Ethernet - 10/1000 Base T IEC COMPATIBILITY (EN61000-4) ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-4 (EFT): 40A - 5/50ns ✔ 61000-4-5 (Surge): 8/20µs - L4, 95A(Line-Gnd), L1, 48A(Power) & L4, 48A(Line-Line) SO-8 FEATURES ✔ ESD PROTECTION > 40 kilovolts ✔ 2000 Watts Peak Pulse Power per Line (tp=8/20µs) ✔ Low Capacitance - 18pF ✔ 100A (2/10µs) per Bellcore 1089(Intra-Building) MECHANICAL CHARACTERISTICS ✔ Molded JEDEC SO-8 ✔ Weight 0.1 grams (Approximate) ✔ Flammability Rating UL 94V-0 ✔ 12mm Tape and Reel Per EIA Standard 481 ✔ Marking: Logo, Marking Code, Date Code & Pin Number 1 Indicated By DOT on Top of Package CIRCUIT DIAGRAM 05080.R4 12/02 1 8 2 7 3 6 4 5 1 www.protekdevices.com PLC03-6 DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified SYMBOL VALUE UNITS Peak Pulse Power (tp = 8/20µs) - See Figure 1 PPP 2000 Watts Operating Temperature TJ -55°C to 150°C °C TSTG -55°C to 150°C °C PARAMETER Storage Temperature ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER PLC03-6 DEVICE MARKING CODE PBA RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE MAXIMUM CLAMPING VOLTAGE (Note 1 & 2) (See Fig. 2) VWM VOLTS @ 1mA V(BR) VOLTS @8/20µs VC @ IPP @VWM ID µA 0V @ 1 MHz C pF 0V @ 1 MHz C pF 6.0 6.8 20.0V @ 100.0A 25 16 8 MAXIMUM LEAKAGE CURRENT MAXIMUM TYPICAL CAPACITANCE CAPACITANCE (See Note 4) (See Note 3) Note 1: For an 8/20µs waveform, apply positive pulse to pin 1 or 8 to pin 2 or 3(ground). Note 2: Measured between pin 1 ro 8 to pin 2 or 3; pin 1 or 8 to pin 4 or 5. Note 3: Measured between I/O pins and ground (pin 1 to 2). Note 4: Measured between I/O pins (pins 1 to 4). 05080.R4 12/02 2 www.protekdevices.com PLC03-6 GRAPHS FIGURE 1 PEAK PULSE POWER VS PULSE TIME PPP - Peak Pulse Current - kilowatts 100 10 2000W, 8/20µs Waveform 1 0.1 0.01 10 100 td - Pulse Duration - µs 1,000 FIGURE 2 PULSE WAVE FORM tf 100 Peak Value IPP 80 e-t FIGURE 3 POWER DERATING CURVE Peak Pulse Power 8/20µs 80 60 40 td = t I /2 PP 20 10,000 100 TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs % Of Rated Power 120 IPP - Peak Pulse Current - % of IPP 1 60 40 20 Average Power 0 0 0 05080.R4 12/02 5 10 15 t - Time - µs 20 25 0 30 3 25 50 75 100 125 TL - Lead Temperature - °C 150 www.protekdevices.com PLC03-6 PACKAGE OUTLINE & DIMENSIONS PACKAGE OUTLINE SO-8 -A- 8 5 -B- 0.010” (0.25 MM) P M B M 4 PL 1 PACKAGE DIMENSIONS 4 DIM D G C R X 45º 0º - 10º -TJ K 0.010” (0.25 MM) M T B S F A S 8 PL MOUNTING PAD 0.050” ± 0.005” 0.160” ± 0.005” A B C D F G J K P R MILLIMETERS MIN MAX 4.80 3.80 1.35 0.35 0.40 1.27 BSC 0.18 0.10 5.80 0.25 INCHES MIN MAX 5.00 0.189 0.196 4.00 0.150 0.157 1.75 0.054 0.068 0.49 0.014 0.019 1.250 0.016 0.049 1.27 BSC 0.05 BSC 0.05 BSC 0.25 0.007 0.009 0.25 0.004 0.008 6.20 0.229 0.244 0.50 0.010 0.019 NOTES: 1. - T - = Seating Plane and Datum Surface. 2. Dimensions “A” and “B” are Datum. 3. Dimensions “A” and “B” do not include mold protrusion. 4. Maximum mold protrusion is 0.015” (0.380 mm) per side. 5. Dimensioning and tolerances per ANSI Y14.5M, 1982. 6. Dimensions are exclusive of mold flash and metal burrs. 0.030” ± 0.005” 0.245” MIN 0.045” ± 0.005” 06009 Rev 1 -11/01 TAPE & REEL ORDERING INFORMATION: Surface mount product is taped and reeled in accordance with EIA-481. Suffix -T7: 7 Inch Reel - 1,000 pieces per reel (i.e., PLC03-6-T7). Suffix -T13: 13 Inch Reel - 2,500 pieces per reel (i.e., PLC03-6-T13). No Suffix: Bulk Quantities - 98 pieces per tube. ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: [email protected] Web Site: www.protekdevices.com COPYRIGHT © ProTek Devices 2003 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. 05080.R4 12/02 4 www.protekdevices.com