05141 USB208 Only One Name Means ProTek’Tion™ STEERING DIODE ARRAY APPLICATIONS ✔ USB Interface Ports ✔ Cellular Phones ✔ Set Top Box Interface ✔ Sensor Interface ✔ Video Interface Ports ✔ Handheld Electronics ✔ Desktop PCs Computers ✔ Personnal Digital Assistant (PDA) SOT-23-6 IEC COMPATIBILITY (EN61000-4) ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-4 (EFT): 40A - 5/50ns FEATURES ✔ ESD Protection > 25 kilovolts ✔ 500 Milliwatt Continuous Power Dissipation ✔ Provides Four (4) Lines of Protection ✔ LOW LEAKAGE CURRENT < 1.0µA ✔ ULTRA LOW CAPACITANCE: 5pF Per Diode MECHANICAL CHARACTERISTICS ✔ Molded JEDEC SO-23-6 ✔ Weight 66 milligrams (Approximate) ✔ Flammability rating UL 94V-0 ✔ 8mm Tape and Reel Per EIA Standard 481 ✔ Marking: Marking Code & Pin One Defined By DOT on Top of Package PIN CONFIGURATION 05141.R6 9/03 I/O 1 1 6 I/O 4 REF 1 2 5 REF 2 I/O 2 3 4 I/O 3 1 www.protekdevices.com USB208 DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified SYMBOL VALUE UNITS TJ -55°C to 150°C °C Storage Temperature TSTG -55°C to 150°C °C Continuous Power Dissipation PPC 500 mW Repetitive Peak Forward Current @ tp=5µs, F=50kHz (Pin 2 - 3) IFRM 700 mA PARAMETER Operating Temperature ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER REPETITIVE PEAK REVERSE VOLTAGE DEVICE MARKING CODE USB208 MAXIMUM FORWARD VOLTAGE MAXIMUM CAPACITANCE (See Note 1) @ 10µA V RRM VOLTS MAXIMUM REVERSE LEAKAGE CURRENT (PER DIODE) VRRM @ 5V IR µA @ 50mA VF VOLTS Cj pF 20 1 1.2 5 PSB Note 1: Apply a 5V bias between pins 2 (REF 1) to pin 5 (REF 2). Measure Cj between any I/O pins to pin 5 (REF 2) and divide by two. 110 IF - Forward Current - mA IF - Forward Current - A 10 FIGURE 1 PEAK FORWARD CURRENT VS FORWARD VOLTAGE 8 6 4 2 05141.R6 9/03 1 2 3 4 5 6 7 8 90 70 50 30 10 800 1000 0 0 10 FIGURE 2 LOW FORWARD CURRENT VS FORWARD VOLTAGE 9 VF - Forward Voltage - V 2 840 880 920 960 VF - Forward Voltage - mV www.protekdevices.com USB208 PACKAGE OUTLINE & DIMENSIONS PACKAGE OUTLINE SOT-23-6 D E 6 5 4 0º - 10º K PACKAGE DIMENSIONS J 1 2 3 DIM L J V B M F A G C A B C D E F G J K L M MILLIMETERS MIN MAX 2.80 1.50 0.90 0.35 0.85 1.70 0.90 0.090 2.60 0.20 TYP 0.35 INCHES MIN MAX 3.05 0.110 0.120 1.75 0.059 0.070 1.30 0.036 0.051 0.50 0.014 0.020 1.05 0.033 0.040 2.10 0.067 0.083 1.45 0.036 0.057 0.20 0.0035 0.008 3.00 0.102 0.118 0.20 TYP 0.007 TYP 0.007 TYP 0.55 0.014 0.022 NOTES MOUNTING PAD 1. Dimensioning and tolerances per ANSI Y14.5M, 1985. 2. Controlling Dimension: Inches 3. Dimensions are exclusive of mold flash and metal burrs. 0.094” (2.40mm) TAPE & REEL ORDERING NOMENCLATURE 1. Surface mount product is taped and reeled in accordance with EIA-481. 2. Suffix-T7 = 7 Inch Reel - 3,000 pieces per 8mm tape, i.e., USB208-T7. 3. Suffix-T13 = 13 Inch Reel - 10,000 pieces per 8mm tape, i.e., USB208-T13. 0.074” (1.90mm) 0.028” (0.70mm) 0.037” (0.95mm) 0.039” (1.00mm) Outline & Dimensions: Rev 1 - 11/01, 06013 COPYRIGHT © ProTek Devices 2003 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: [email protected] Web Site: www.protekdevices.com DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. 05141.R6 9/03 3 www.protekdevices.com