05080 PLC03-6 STEERING DIODE/TVS ARRAY COMBO APPLICATIONS ✔ T1/E1 & T3/E3 Line Cards ✔ ISDN U-Interface & S/T Interface ✔ xDSL ✔ Ethernet - 10/100 Base T IEC COMPATIBILITY (EN61000-4) ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-4 (EFT): 40A - 5/50ns ✔ 61000-4-5 (Surge): 8/20µs - L4, 95A(Line-Gnd) & L4, 48A(Line-Line) SO-8 FEATURES ✔ 2000 Watts Peak Power per Line (tp = 8/20µs) ✔ Protects Two (2) Lines ✔ 100A (2/10µs) per Bellcore GR-1089(Intra-Building) ✔ ESD Protection > 25 kilovolts ✔ Low Capacitance: < 20pF ✔ RoHS Compliant MECHANICAL CHARACTERISTICS ✔ Molded JEDEC SO-8 ✔ Weight 70 milligrams (Approximate) ✔ Available in Lead-Free Pure-Tin Plating(Annealed) ✔ Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C ✔ Consult Factory for Leaded Device Availability ✔ Flammability Rating UL 94V-0 ✔ 12mm Tape and Reel Per EIA Standard 481 ✔ Marking: Logo, Marking Code, Date Code & Pin One Defined by Dot on Top of Package PIN CONFIGURATION 05080.R7 2/07 8 7 6 5 1 2 3 4 1 www.protekdevices.com PLC03-6 DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER Peak Pulse Power (tp = 8/20µs) - See Figure 1 Operating Temperature Storage Temperature SYMBOL VALUE UNITS PPP 2000 Watts TL -55 to 150 °C TSTG -55 to 150 °C ELECTRICAL CHARACTERISTICS PER LINE PART NUMBER PLC03-6 Note Note Note Note DEVICE MARKING CODE PBA RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE V WM VOLTS 6.0 @ 25°C Unless Otherwise Specified MAXIMUM LEAKAGE CURRENT TYPICAL CAPACITANCE (See Note 3) TYPICAL CAPACITANCE (See Note 4) @ 1mA V(BR) VOLTS MAXIMUM CLAMPING VOLTAGE (See Notes 1-2) (See Fig. 2) 8/20µs VC @ IPP VOLTS @ VWM ID µA @0V, 1 MHz CJ(SD) pF @0V, 1 MHz CJ(SD) pF 6.8 20.0V @ 100.0A 25 16 8 1: For an 8/20µs waveform, apply positive pulse to pin 1 to 8 to pin 2 or 3 (ground). 2: Measured between pin 1 or 8 to pin 2 or 3; pin 1 or 8 to pin 4 or 5. 3: Measured between I/O pins and ground (pin 1 to 2). 4: Measured between I/O pins (pins 1 to 4). 05080.R7 2/07 2 www.protekdevices.com PLC03-6 GRAPHS FIGURE 1 PEAK PULSE POWER VS PULSE TIME PPP - Peak Pulse Current - kilowatts 100 10 2000W, 8/20µs Waveform 1 0.1 0.01 1 10 100 td - Pulse Duration - µs 10,000 FIGURE 2 PULSE WAVE FORM 120 IPP - Peak Pulse Current - % of IPP 1,000 tf 100 TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs Peak Value IPP 80 e-t 60 40 td = t I /2 PP 20 0 0 5 10 15 t - Time - µs 25 30 FIGURE 3 POWER DERATING CURVE 100 Peak Pulse Power 8/20µs 80 % Of Rated Power 20 60 40 20 Average Power 0 0 05080.R7 2/07 25 50 75 100 125 TL - Lead Temperature - °C 3 150 www.protekdevices.com PLC03-6 SO-8 PACKAGE OUTLINE & DIMENSIONS PACKAGE OUTLINE SO-8 -A- 8 5 + 0.010 (0.25 MM) M B M 4 PL -B - P 1 G PACKAGE DIMENSIONS 4 DIM A B C D F G J K P R D C R x 45° 0° - 10° -T- K 0.010 (0.25 MM) M T B S A S 8 PL + J F MILLIMETERS MIN MAX 4.80 3.80 1.35 0.35 0.40 1.27 BSC 0.18 0.10 5.80 0.25 INCHES MIN MAX 0.196 5.00 0.189 0.150 0.157 4.00 1.75 0.054 0.068 0.49 0.014 0.019 0.049 1.250 0.016 1.27 BSC 0.05 BSC 0.05 BSC 0.25 0.007 0.009 0.004 0.008 0.25 6.20 0.229 0.244 0.019 0.50 0.010 NOTES 1. 2. 3. 4. 5. 6. MOUNTING PAD 0.050 ± 0.005 0.030 ± 0.005 - T - = Seating Plane and Datum Surface. Dimensions “A” and “B” are Datum. Dimensions “A” and “B” do not include mold protrusion. Maximum mold protrusion is 0.015” (0.380 mm) per side. Dimensioning and tolerances per ANSI Y14.5M, 1982. Dimensions are exclusive of mold flash and metal burrs. TAPE & REEL/BULK ORDERING NOMENCLATURE 0.160 ± 0.005 1. Surface mount product is taped and reeled in accordance with EIA-481. 2. Suffix-T7 = 7 Inch Reel - 1,000 pieces per 12mm tape, i.e. PLC03-6-T7.. 3. Suffix-T13 = 13 Inch Reel - 2,500 pieces per 12mm tape, i.e., PLC03-6-T13. 4. Suffix - LF = Lead-Free, Pure-Tin Plating, i.e., PLC03-6-LF-T7. 5. No Suffix = Product Shipped in Tubes of 98 pcs per Tube. 0.245 MIN 0.045 ± 0.005 Outline & Dimensions: Rev 1 - 11/01, 06009 COPYRIGHT © ProTek Devices 2007 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. 05080.R7 2/07 4 ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: [email protected] Web Site: www.protekdevices.com www.protekdevices.com