05125 ET724 Only One Name Means ProTek’Tion™ STEERING DIODE ARRAY APPLICATIONS ✔ Ethernet - 10/100/1000 Base T ✔ Cellular Phones ✔ Set Top Box Interface ✔ Sensor Interface ✔ Handheld Electronics ✔ FireWire ✔ USB Interface IEC COMPATIBILITY (EN61000-4) SOT-23-6 ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-4 (EFT): 40A - 5/50ns ✔ 61000-4-5 (Surge): 12A, 8/20µs - Level 1(Line-Gnd) & Level 2(Line-Line) FEATURES ✔ ESD Protection > 40 kilovolts ✔ Low Clamping Voltage ✔ Provides Four (4) Lines of Protection ✔ LOW LEAKAGE CURRENT < 100nA ✔ ULTRA LOW CAPACITANCE: 3pF Typical MECHANICAL CHARACTERISTICS ✔ Molded JEDEC SOT-23-6 ✔ Weight 66 milligrams (Approximate) ✔ Flammability rating UL 94V-0 ✔ 8mm Tape and Reel Per EIA Standard 481 ✔ Marking: Marking Code & Pin One Defined By Dot on Top of Package PIN CONFIGURATION 05125.R6 8/03 I/O 1 1 6 I/O 4 VN 2 5 VP I/O 2 3 4 I/O 3 1 www.protekdevices.com ET724 DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified SYMBOL VALUE UNITS TJ -55°C to 150°C °C Storage Temperature TSTG -55°C to 150°C °C Continuous Power Dissipation PPC 125 mW PARAMETER Operating Temperature ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER DEVICE MARKING ET724 724 REPETITIVE PEAK REVERSE VOLTAGE (See Note 1) MAXIMUM PEAK PULSE FORWARD CURRENT TYPICAL FORWARD VOLTAGE VRRM VOLTS 8/20µs @1A VF VOLTS 8/20µs IFM AMPS MAXIMUM REVERSE LEAKAGE CURRENT (See Note 2) @ VRRM IR nA 20 2 12 10 MAXIMUM QUIESCENT SUPPLY CURRENT (See Note 3) @20V IRQ nA TYPICAL CAPACITANCE 100 3 @0V, 1 MHz Cj pF Note 1: VRRM is +VCC for pin 5, -VEE for pin 2. Pin 2 also represents ground for unidirectional applications. Note 2: +20V from pin 5 to 1, 5 to 4, 5 to 3, and 5 to 6. -20V from pin 2 to 1, 2 to 3, 2 to 4, and 2 to 6. Note 3: +20V from pin 5 to 2. FIGURE 1 NON-REPETITIVE PEAK PULSE CURRENT CAPABILITY 120 IPP - Peak Pulse Current - % of IPP Peak Pulse Current - Amps 8 6 4 2 0 0.001 05125.R6 8/03 FIGURE 2 PULSE WAVE FORM tf 100 TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs Peak Value IPP 80 e-t 60 40 td = t I /2 PP 20 0 0.01 0.1 1 Square Wave Pulse - ms 10 100 2 0 5 10 15 t - Time - µs 20 25 30 www.protekdevices.com ET724 GRAPHS 200 Forward Current - mA 160 FIGURE 3 TYPICAL LOW CURRENT FORWARD VOLTAGE DROP TA = 25°C SINGLE PULSE See Figure 2 120 80 40 0 600 5 Forward Current - A 4 800 1,000 Forward Voltage Drop - mV 1,200 FIGURE 4 TYPICAL HIGH CURRENT FORWARD VOLTAGE DROP TA = 25°C SINGLE PULSE See Figure 2 3 2 1 0 0 05125.R6 8/03 1 2 Forward Voltage Drop - V 3 3 www.protekdevices.com ET724 PACKAGE OUTLINE & DIMENSIONS PACKAGE OUTLINE SOT-23-6 D E 6 5 4 0º - 10º K PACKAGE DIMENSIONS J 1 2 3 DIM L J V B M F A G C A B C D E F G J K L M MILLIMETERS MIN MAX 2.80 1.50 0.90 0.35 0.85 1.70 0.90 0.090 2.60 0.20 TYP 0.35 INCHES MIN MAX 3.05 0.110 0.120 1.75 0.059 0.070 1.30 0.036 0.051 0.50 0.014 0.020 1.05 0.033 0.040 2.10 0.067 0.083 1.45 0.036 0.057 0.20 0.0035 0.008 3.00 0.102 0.118 0.20 TYP 0.007 TYP 0.007 TYP 0.55 0.014 0.022 NOTES MOUNTING PAD 1. Dimensioning and tolerances per ANSI Y14.5M, 1985. 2. Controlling Dimension: Inches 3. Dimensions are exclusive of mold flash and metal burrs. 0.094” (2.40mm) TAPE & REEL ORDERING NOMENCLATURE 1. Surface mount product is taped and reeled in accordance with EIA-481. 2. Suffix-T7 = 7 Inch Reel - 3,000 pieces per 8mm tape, i.e., ET724-T7. 3. Suffix-T13 = 13 Inch Reel - 10,000 pieces per 8mm tape, i.e., ET724-T13. 0.074” (1.90mm) 0.028” (0.70mm) 0.037” (0.95mm) 0.039” (1.00mm) Outline & Dimensions: Rev 1 - 11/01, 06013 COPYRIGHT © ProTek Devices 2003 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: [email protected] Web Site: www.protekdevices.com DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. 05125.R6 8/03 4 www.protekdevices.com