05240 PLR0504F Only One Name Means ProTek’Tion™ STEERING DIODE / TVS ARRAY COMBO APPLICATIONS ✔ Ethernet - 10/100/1000 Base T ✔ Cellular Phones ✔ Handheld & Portable Electronics ✔ Video/Graphics Card ✔ USB 2.0 Interface ✔ DVI Interface IEC COMPATIBILITY (EN61000-4) SC70-6L ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-4 (EFT): 40A - 5/50ns FEATURES ✔ 200 Watts Peak Pulse Power per Line (tp = 8/20µs) ✔ ESD Protection > 40 kilovolts ✔ Low Clamping Voltage ✔ PROTECTS FOUR (4) LINES ✔ ULTRA LOW CAPACITANCE: 1.9pF Typical ✔ RoHS Compliant in Lead Free Versions MECHANICAL CHARACTERISTICS ✔ Molded JEDEC SC-70-6L Package ✔ Weight 7 milligrams (Approximate) ✔ Available in Tin-Lead or Lead-Free Nickel-Paladium-Gold Plating ✔ Solder Reflow Temperature: Tin-Lead - Sn/Pb, 85/15: 240-245°C Nickel-Paladium-Gold (Ni/Pd/Au) Sn/Ag/Cu, 96/3.5/0.5: 260-270°C ✔ Flammability Rating UL 94V-0 ✔ 8mm Tape and Reel Per EIA Standard 481 ✔ Marking: Marking Code & Pin One Defined By DOT on Top of Package PIN CONFIGURATION 05240.R0 1/06 I/O 1 1 6 I/O 4 GND 2 5 REF I/O 2 3 4 I/O 3 1 www.protekdevices.com PLR0504F DEVICE CHARACTERISTICS MAXIMUN RATINGS @ 25°C Unless Otherwise Specified SYMBOL VALUE UNITS Peak Pulse Power (tp = 8/20µs) - See Figure 1 PPP 200 Watts Operating Temperature TJ -55°C to 150°C °C Storage Temperature TSTG -55°C to 150°C °C Forward Surge Rating (1/20 seconds @ 25°C, IF = 10mA) VF 1.5 Volts PARAMETER ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER DEVICE MARKING A5 PLR0504F RATED STAND-OFF VOLTAGE (See Note 1) MINIMUM BREAKDOWN VOLTAGE (See Note 1) MAXIMUM CLAMPING VOLTAGE (See Fig. 2) (See Note 1) @ IP = 5A VC VOLTS MAXIMUM LEAKAGE CURRENT (See Note 1) TYPICAL CAPACITANCE (See Note 1) @ 1mA V(BR) VOLTS MAXIMUM CLAMPING VOLTAGE (See Fig. 2) (See Note 1) @ IP = 1A VC VOLTS VWM VOLTS @VWM ID µA @0V, 1 MHz Cj(SD) pF 5.0 6.0 15.0 25.0 3 1.9 Note 1: From I/O Pin to Ground. FIGURE 1 PEAK PULSE POWER VS PULSE TIME IPP - Peak Pulse Current - % of IPP PPP - Peak Pulse Current - Watts 10,000 1,000 200W, 8/20µs Waveform 100 10 0.01 05240.R0 1/06 FIGURE 2 PULSE WAVE FORM 120 tf 100 TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs Peak Value IPP 80 e-t 60 40 td = t I /2 PP 20 0 1 10 100 td - Pulse Duration - µs 1,000 10,000 2 0 5 10 15 t - Time - µs 20 25 30 www.protekdevices.com PLR0504F GRAPHS FIGURE 3 POWER DERATING CURVE 100 Peak Pulse Power 8/20µs % Of Rated Power 80 60 40 20 Average Power 0 0 25 50 75 100 125 TL - Lead Temperature - °C 150 FIGURE 4 OVERSHOOT & CLAMPING VOLTAGE 5 Volts per Division 35 25 15 5 -5 ESD Test Pulse: 25 kilovolt, 1/30ns (waveshape) 05240.R0 1/06 3 www.protekdevices.com PLR0504F PACKAGE OUTLINE & DIMENSIONS PACKAGE OUTLINE D SC70-6L E 6 5 4 3 2 PACKAGE DIMENSIONS 0° - 8° K 1 DIM L J B F A B C D E F G J K L M M A G C MOUNTING PAD 4 0.020 0.051 0.026 0.068 0.024 0.044 0.092 2.15 1.35 1.00 0.30 1.10 0.25 2.20 0.10 0.46 0.074 0.045 0.031 0.006 0.0255 BSC 0.0512 BSC 0.031 0.003 0.078 0 0.010 0.084 0.055 0.040 0.012 0.043 0.010 0.086 0.004 0.018 1. Dimensioning and tolerances per ANSI Y14.5M, 1985. 2. Controlling Dimension: Inches 3. Dimensions are exclusive of mold flash and metal burrs. DIM Millimeters Inches 0.50 1.30 0.65 1.72 0.60 1.11 2.33 1.90 1.15 0.80 0.15 0.65 BSC 1.30 BSC 0.80 0.08 2.00 0 0.26 NOTES TYPICAL 1 2 3 4 5 6 7 INCHES MIN MAX MILLIMETERS MIN MAX TAPE & REEL ORDERING NOMENCLATURE 3 1. Surface mount product is taped and reeled in accordance with EIA-481. 2. Suffix-T7 = 7 Inch Reel - 3,000 pieces per 8mm tape, i.e., PLR0504F-T7. 3. Suffix-P = Lead-Free Nickel-Paladium-Gold Plating, i.e., PLR0504F-P-T7. 2 1 5 6 7 Outline & Dimensions: Rev 3 - 9/05, 06019 Tape & Reel Specifications (Dimensions in millimeters) Reel Dia. Tape Width 178mm (7”) 8mm A0 B0 K0 D E F P0 W P2 P 2.25 ± 0.10 2.34 ± 0.10 1.22 ± 0.10 1.50 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 8.00 ±0.30 4.00 ±0.10 2.00 ±0.05 4.00 ±0.10 P0 t P2 D tmax 0.25 10 Pitches Cumulative Tolerance on Tape. ± 0.2 E Pin 1 Indicated by Dot Top cover tape A0 F W K0 B0 P User Direction of Feed COPYRIGHT © ProTek Devices 2005 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. 05240.R0 1/06 4 ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: [email protected] Web Site: www.protekdevices.com www.protekdevices.com