SOLID TANTALUM TD (Resin Dipped Radial) SERIES SOLID TANTALUM CAPACITANCE RANGE: The TD series is a range of resin dipped tantalum capacitors designed for entertainment, commercial, and industrial equipment. They have sintered anodes and solid electrolyte. The epoxy resin housing is flame retardent with a limiting oxygen index in excess of 30 (ASTM–D–2863). (Number denotes case size) Rated Voltage (WV) 6.3 10 16 20 25 35 50 Surge Voltage (V) Cap (µf) 8 13 20 26 33 46 65 0.10 1 1 0.15 1 1 0.22 1 1 0.33 1 2 0.47 1 2 0.68 1 2 RATINGS Capacitance Range: 0.1µf to 680µf Tolerance: ±20% Voltage Range: 6.3V to 50V PERFORMANCE SPECIFICATIONS 1.0 Operating Temperature Range: –55°C to +85°C (–67°F to +185°F) Capacitance Tolerance (M): ±20% measured at +20°C (+68°F), 120HZ Dissipation Factor: measured at +20°C (+68°F),120HZ Capacitance Range µf 0.1 – 1.5 ≤ 0.04 2.2 – 6.8 10 – 68 ≤ 0.06 2.2 2 2 3 5 7 4.7 1 2 3 4 4 5 8 100 – 680 6.8 2 3 4 5 5 6 8 ≤ 0.10 10.0 3 4 5 6 6 7 9 15.0 4 5 6 7 7 9 10 22.0 5 6 7 8 9 10 13 33.0 6 7 8 9 10 12 47.0 7 8 10 11 12 14 68.0 8 9 11 13 13 13 35 50 8 13 20 26 33 46 65 Lead Solderability: Meets the requirements of MIL–STD 202, Method 208 Marking: Consists of capacitance, DC voltage, and polarity. Recommended Cleaning Solvents: Methanol, isopropanol ethanol, isobutanol, petroleum ether, propanol and/or commercial detergents. Halogenated hydrocarbon cleaning agents such as Freon (MF, TF, or TC), trichloroethylene, trichloroethane, or methylchloride are not recommended as they may damage the capacitor. 10 Min +68 +6.3V D Ø Max d L Max ORDERING INFORMATION Capacitance 1 4 MECHANICAL SPECIFICATIONS Series 5 1 3 ≤ 0.08 M 2 3 25 47 1 2 20 TD 1 1 16 S 4 1 1 10 2 Min 1 3.3 6.3 Surge Voltage 1 1.5 Surge Voltage: DC Rated Voltage 1 50 100.0 9 11 13 150.0 11 13 15 220.0 12 14 15 330.0 14 15 470.0 15 680.0 15 TD Series Dimensions: mm Diameter (D Ø) x Length (L) Case Size Diameter (D Ø) Length (L) Lead Wire (d) 1 4.50 8.50 0.50 2 4.50 9.00 0.50 3 5.00 10.00 0.50 4 5.00 10.50 0.50 5 5.50 10.50 0.50 6 6.00 11.50 0.50 7 6.50 11.50 0.50 8 7.00 12.00 0.40 9 8.00 13.00 0.50 10 8.50 14.00 0.50 11 9.00 14.00 0.50 12 9.00 14.50 0.50 13 9.00 16.00 0.50 Tolerance 14 10.00 17.00 0.50 Voltage 15 10.00 18.50 0.50 16 Spacing (S) 2.54 ± ±0.51 5.08 ±0.51 NTE Electronics, Inc. D Voice (800) 631–1250 (973) 748–5089 D FAX (973) 748–6224 D http://www.nteinc.com