05090 PMMAD1108 Only One Name Means ProTek’Tion™ STEERING DIODE ARRAY APPLICATIONS ✔ High Frequency Data Lines ✔ RS-232 & RS-422 Interface Networks ✔ Ethernet - 10/100 Base T ✔ Computer I/O Ports IEC COMPATIBILITY (EN61000-4) ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-4 (EFT): 40A - 5/50ns ✔ 61000-4-5 (Surge): 24A, 8/20µs Level 2 (Line-Ground) & Level 3 (Line-Line) SO-16 FEATURES ✔ 500 Milliwatt Continuous Power Dissipation ✔ ESD Protection > 40 kilovolts ✔ Provides Protection for 8 I/O Lines ✔ Working Voltage > 50 Volts ✔ Low Insertion Loss & Cross-talk ✔ LOW LEAKAGE CURRENT < 0.1µA ✔ ULTRA LOW CAPACITANCE: 5pF Per Diode MECHANICAL CHARACTERISTICS ✔ Molded JEDEC SO-16 Package ✔ Weight 0.15 grams (Approximate) ✔ Flammability rating UL 94V-0 ✔ 16mm Tape and Reel Per EIA Standard 481 ✔ Marking: Logo, Part Number, Date Code & Pin One Defined By Dot on Top of Package PIN CONFIGURATION CIRCUIT DIAGRAM + I/O PORT 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 8 ISOLATED DIODE ARRAY 8 LINES OF PROTECTION GND OR (-) 05090.R5 8/03 1 1 www.protekdevices.com PMMAD1108 DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER Continuous Power Dissipation Continuous Forward Current (Single Diode) Repetitive Peak Forward Current @ tp=5µs, F=50kHz Operating Temperature Storage Temperature SYMBOL VALUE UNITS PPK 500 Milliwatts IF 400 mA I FRM 700 mA TJ -55°C to 150°C °C TSTG -55°C to 150°C °C ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER PMMAD1108 REPETITIVE PEAK REVERSE VOLTAGE @ 10µA VRRM VOLTS MAXIMUM FORWARD PEAK PULSE CURRENT @8/20µs IFM AMPS MAXIMUM FORWARD VOLTAGE 50 40 1.2 0.1 5 @ 4V, 1 MHz Cj pF FIGURE 1 PULSE WAVE FORM 120 IPP - Peak Pulse Current - % of IPP MAXIMUM CAPACITANCE (Per Diode) @100mA VF VOLTS MAXIMUM REVERSE LEAKAGE CURRENT VRRM @ 40V IR µA tf 100 TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs Peak Value IPP 80 e-t 60 40 td = t I /2 PP 20 0 0 05090.R5 8/03 5 10 15 t - Time - µs 2 20 25 30 www.protekdevices.com PMMAD1108 PACKAGE OUTLINE & DIMENSIONS PACKAGE OUTLINE SO-16 -A- 9 16 -B- P 1 0.010” (0.25 MM) M B M 8 PL 8 PACKAGE DIMENSIONS DIM G R X 45º C 0º - 7º -TK 16 PL 0.010” (0.25 MM) M F D M T B S A S 9.80 3.80 1.35 0.35 0.40 1.27 BSC 0.19 0.10 5.80 0.25 INCHES MIN MAX 0.386 0.393 10.00 0.150 4.00 0.157 0.054 0.068 1.75 0.014 0.49 0.019 0.016 1.25 0.049 1.27 BSC 0.05 BSC 0.05 BSC 0.008 0.25 0.009 0.004 0.009 0.25 0.229 6.20 0.244 0.010 0.50 0.019 NOTES MOUNTING PAD 0.050” TYP 0.030” ± 0.005” 0.160” ± 0.005” J A B C D F G J K P R MILLIMETERS MIN MAX 1. - T - = Seating Plane and Datum Surface. 2. Dimensions “A” and “B” are Datum. 3. Dimensions “A” and “B” do not include mold protrusions. 4. Maximum mold protrusion is 0.015” (0.380 mm) per side. 5. Dimensioning and tolerances per ANSI Y14.5M, 1982. 6. Dimensions are exclusive of mold flash and metal burrs. TAPE & REEL/BULK ORDERING NOMENCLATURE 0.245” MIN 1. Surface mount product is taped and reeled in accordance with EIA-481. 2. Suffix-T7 = 7 Inch Reel - 1,000 pieces per 16mm tape, i.e., PMMAD1108-T7. 3. Suffix-T13 = 13 Inch Reel - 2,500 pieces per 16mm tape, i.e., PMMAD1108-T13. 4. No Suffix = Product Shipped in Tubes of 37 pcs per Tube. 0.045” ± 0.005” Outline & Dimensions: Rev 1 - 11/01, 06007 COPYRIGHT © ProTek Devices 2003 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: [email protected] Web Site: www.protekdevices.com DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. 05090.R5 8/03 3 www.protekdevices.com