05088 SMP6LC05-2P thru SMP6LC12-2P . . . engineered solutions for the transient environment™ LOW CAPACITANCE TVS ARRAYS APPLICATIONS ✔ T1/E1 ✔ Cellular Phones ✔ Portable Electronics ✔ Wireless LANs ✔ Video Inputs IEC COMPATIBILITY (EN61000-4) ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-4 (EFT): 40A - 5/50ns ✔ 61000-4-5 (Surge): 8/20µs - 95A, L4 Line-Gnd), 48A, L4(Line-Line) & 83A, L2(Power) SO-16 FEATURES ✔ 3,600 Watts Peak Pulse Power per Line (tp=8/20µs) ✔ 600 Watts Peak Pulse Power per Line (tp=10/1000µs) ✔ High Surge Capability: 80A (10/1000µs) ✔ Protects Two (2) Bidirectional Lines ✔ Available in 3 Voltages: 5.0V, 6.5V & 12V ✔ LOW CAPACITANCE: <30pF per LINE PAIR MECHANICAL CHARACTERISTICS ✔ Molded JEDEC SO-16 Package ✔ Weight 0.15 grams (Approximate) ✔ Flammability rating UL 94V-0 ✔ 16mm Tape and Reel Per EIA Standard 481-1-A ✔ Marking: Logo, Part Number & Pin One Defined By Dot on Top of Package CIRCUIT DIAGRAMS 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 LINE A LINE B LINE C 05088.R1 4/02 LINE D 1 www.protekdevices.com SMP6LC05-2P thru SMP6LC12-2P DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified SYMBOL VALUE UNITS Peak Pulse Power (tp = 8/20µs) PPP 3,600 Watts Peak Pulse Power (tp = 10/1000µs) - See Figure 1 PPP 600 Watts TJ -55°C to 150°C °C TSTG -55°C to 150°C °C PARAMETER Operating Temperature Storage Temperature ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER (Note 1) SMP6LC05-2P SMP6LC6.5-2P SMP6LC12-2P TYPICAL CAPACITANCE @ VWM ID µA MAXIMUM CLAMPING VOLTAGE (See Fig. 2) @ IPP = 10A VC VOLTS 300 300 2.0 9.6 12.4 19.9 15 15 15 RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE MAXIMUM LEAKAGE CURRENT VWM VOLTS @ 1mA V(BR) VOLTS 6.0 6.5 12.0 6.0 7.2 13.3 @0V, 1MHz C pF Note 1: Do no surge from pins 15/16 to 1/2, 3/4 to 13/14, 11/12 to 5/6 and 7/8 to 9/10. PIV typically greater than 100 Volts for each rectifier diode. 05088.R1 4/02 2 www.protekdevices.com SMP6LC05-2P thru SMP6LC12-2P GRAPHS FIGURE 1 PEAK PULSE POWER VS PULSE TIME PPP - Peak Pulse Power - kW 100 10 600W 10/1000µs Waveform 1 0.1 0.1 10 100 1,000 td - Pulse Duration - µs 10,000 FIGURE 2 PULSE WAVE FORM 100 100,000 FIGURE 3 POWER DERATING CURVE 100 TEST WAVEFORM PARAMETERS tf = 10µs td = 1,000µs tf Peak Value IPP Peak Pulse Power 10/1000µs 80 % Of Rated Power IPP - Peak Pulse Current - % of IPP 1 td = t I /2 PP 50 60 40 20 Average Power e-t 0 0 0 0 1 2 3 25 50 75 100 125 TL - Lead Temperature - °C 150 t - Time - µs 05088.R1 4/02 3 www.protekdevices.com SMP6LC05-2P thru SMP6LC12-2P PACKAGE OUTLINE & DIMENSIONS PACKAGE OUTLINE SO-16 -A- 9 16 -B- P 1 0.010” (0.25 MM) M B M PACKAGE DIMENSIONS 8 PL 8 DIM G R X 45º C 0º - 7º -TK 16 PL 0.010” (0.25 MM) M T B S M F D A S MOUNTING PAD 0.050” TYP 0.030” ± 0.005” 0.160” ± 0.005” 0.245” MIN J A B C D F G J K P R MILLIMETERS MIN MAX 9.80 3.80 1.35 0.35 0.40 1.27 BSC 0.19 0.10 5.80 0.25 INCHES MIN MAX 0.386 10.00 0.393 0.150 4.00 0.157 0.054 1.75 0.068 0.014 0.49 0.019 0.016 1.25 0.049 1.27 BSC 0.05 BSC 0.05 BSC 0.008 0.25 0.009 0.004 0.25 0.009 0.229 6.20 0.244 0.010 0.50 0.019 NOTES: 1. - T - = Seating Plane and Datum Surface. 2. Dimensions “A” and “B” are Datum. 3. Dimensions “A” and “B” do not include mold protrusions. 4. Maximum mold protrusion is 0.015” (0.380 mm) per side. 5. Dimensioning and tolerances per ANSI Y14.5M, 1982. 6. Dimensions are exclusive of mold flash and metal burrs. 0.045” ± 0.005” 06007 Rev 1 - 11/01 TAPE & REEL PACKAGING: Surface mount product is taped and reeled in accordance with EIA-481, reel quantites and sizes are as follows: 7 Inch Reel - 1,000 pieces per reel; 13 Inch Reel - 2,500 pieces per reel Protek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: [email protected] Web Site: www.protekdevices.com COPYRIGHT © ProTek Devices 2001 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. 05088.R1 4/02 4 www.protekdevices.com