05115 TSMDA05CM thru TSMDA24CM . . . engineered solutions for the transient environment™ BIDIRECTIONAL MONOLITHIC TVS DIODE ARRAY APPLICATIONS ✔ RS-232, RS-422 & RS-423 Data Lines ✔ Microprocessor Based Equipment ✔ Control & Monitoring Systems ✔ Portable Electronics IEC COMPATIBILITY (EN61000-4) ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-4 (EFT): 40A - 5/50ns ✔ 61000-4-5 (Surge): 12A, 8/20µs - Level 1(Line-Gnd) & Level 2(Line-Line) TSSOP FEATURES ✔ 500 Watts Peak Pulse Power DissipationPer Line (tp = 8/20µs) ✔ Bidirectional Monolithic Design ✔ ESD Protection > 40 kilovolts ✔ Available in Five Voltage Types Ranging From 5.0V to 24V MECHANICAL CHARACTERISTICS ✔ Molded JEDEC SO-8 ✔ Weight 0.1 gram (Approximate) ✔ Flammability Rating UL 94V-0 ✔ 12mm Tape and Reel Per EIA Standard 481 ✔ Device Marking: Marking Code & Logo ✔ Pin 1 Indicated By Dot on Top of Package CIRCUIT DIAGRAMS 05115. R1 8/02 1 8 2 7 3 6 4 5 1 www.protekdevices.com TSMDA05CM thru TSMDA24CM DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified SYMBOL VALUE UNITS Peak Pulse Power (tp = 8/20µs) - See Figure 1 PPP 500 Watts Operating Temperature TJ -55°C to 150°C °C TSTG -55°C to 150°C °C PARAMETER Storage Temperature ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER TSMDA05CM TSMDA08CM TSMDA12CM TSMDA15CM TSMDA24CM 05115.R1 8/02 DEVICE MARKING REJ REK REL REM REN RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE MAXIMUM CLAMPING VOLTAGE (See Fig. 2) MAXIMUM CLAMPING VOLTAGE (See Fig. 2) MAXIMUM LEAKAGE CURRENT MAXIMUM CAPACITANCE @ 1mA V(BR) VOLTS @ IP = 1A VC VOLTS @ 8/20µs VWM VOLTS VC @ IPP @VWM ID µA 0V @ 1 MHz C pF 5.0 8.0 12.0 15.0 24.0 6.0 8.5 13.4 16.7 26.7 9.8 13.4 19.0 24.0 43.0 19V @ 30A 23V @ 24A 29V @ 20A 31V @ 18A 45V @ 13A 100 10 1 1 1 350 300 150 100 63 2 www.protekdevices.com TSMDA05CM thru TSMDA24CM GRAPHS FIGURE 1 PEAK PULSE POWER VS PULSE TIME PPP - Peak Pulse Power - Watts 10,000 500W, 8/20µs Waveform 1,000 100 10 0.01 1 10 100 td - Pulse Duration - µs 10,000 FIGURE 2 PULSE WAVE FORM 120 IPP - Peak Pulse Current - % of IPP 1,000 tf 100 TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs Peak Value IPP 80 e-t 60 40 td = t 20 IPP/2 0 0 5 10 15 t - Time - µs 25 30 FIGURE 3 POWER DERATING CURVE 100 Peak Pulse Power 8/20µs 80 % Of Rated Power 20 60 40 20 Average Power 0 0 05115.R1 8/02 25 50 75 100 125 TL - Lead Temperature - °C 3 150 www.protekdevices.com TSMDA05CM thru TSMDA24CM PACKAGE OUTLINE & DIMENSIONS PACKAGE OUTLINE TSSOP-8 A 5 8 PACKAGE DIMENSIONS B 1 C DIM 4 D E P J F G K M N MOUNTING PAD 0.025” BSC 0.016” ± 0.003” 0.170” MIN 0.280” MIN B A C D E F G J K M N P MILLIMETERS MIN MAX 0.65 BSC 4.30 6.30 2.90 0.05 0.16 0° 0.09 0.45 0.09 INCHES MIN MAX 0.65 BSC 0.026 BSC 0.026 BSC 4.50 0.169 0.177 6.50 0.248 0.256 3.10 0.114 0.122 1.20 0.047 0.25 0.002 0.010 0.32 0.006 0.013 0.95 0.037 10° 0° 10° 0.24 0.004 0.009 0.55 0.018 0.022 0.20 0.004 0.008 NOTES: 1. - T - = Seating Plane and Datum Surface. 2. Dimensions “A” and “B” are Datum. 3. Dimensions “A” and “B” do not include mold protrusions. 4. Dimension “A” does not include mold flash, protrusions or gate burrs. 6. Dimension “B” does not include dambar protrusions. 06015 Rev 0 - 12/01 0.045” ± 0.005” PART NUMBER SUFFIXES USED FOR TAPE & REEL/BULK ORDERING: Surface mount product is taped and reeled in accordance with EIA-481. Suffix-T7 = 7 Inch Reel - 1,000 pieces per reel i.e.: TSMDA05CM - T7 Suffix-T13 = 13 Inch Reel - 2,500 pieces per reel i.e: TSMDA05CM - T13 No Suffix = Product Shipped in Tubes of 98 pcs per Tube Protek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: [email protected] Web Site: www.protekdevices.com COPYRIGHT © ProTek Devices 2001 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. 05115.R1 8/02 4 www.protekdevices.com