TEMEX TMX S142 SAW BANDPASS FILTER - ISM - RF Specification (Rev. 2) Operating temperature range: [-25°C ; +75°C] Electrical Parameters Unit Minimum Source impedance (single ended) Ω - Load impedance (single ended) Ω Typical (1) Maximum 50 (2) - - 50 (2) - MHz - 869 - 300 kHz to 856.4 MHz dB 40 41 - 856.4 MHz to 858.5 MHz dB 20 40 - 880 MHz to 883 MHz dB 30 38 - 883 MHz to 1200 MHz dB 45 50 - 1200 MHz to 2000 MHz dB 35 40 - Maximum insertion loss in 868 MHz-870 MHz dB - 2.4 3.0 Amplitude variation in 868 MHz-870 MHz dB 0.2 0.8 Center frequency fo Absolute attenuation (3) Input VSWR in 868 MHz-870 MHz at 25°C - - 1.4:1 2.0:1 Output VSWR in 868 MHz-870 MHz at 25°C - - 1.4:1 2.0:1 dBm - - 25 Length x Width mm2 - 3.8 x 3.8 - Height mm - 1.35 1.55 Input power in 868 MHz-870 MHz (4) Package type & size Input 2 Output 5 Case Ground 1, 3, 4, 6 To Be Grounded 1, 3, 4, 6 Notes: (1): Typical values are nominal performances at room temperature (2): No external matching circuit is required (3): The amplitude variation is defined as the maximum level - minimum level over the given bandwidth (4): Minimum life time at 50° C superior to 175 000 hours. 50 Ω / 50 Ω CONFIGURATION Input 50 Ω Single Output 50 Ω Single GND 1 TEMEX reserves the right to modify herein specifications and information at any time when necessary to provide optimum performance and cost. March 2004 Pin out TEMEX TMX S142 SAW BANDPASS FILTER - ISM - RF Specification (Rev. 2) Operating temperature range: [-10°C ; +60°C] Electrical Parameters Unit Minimum Source impedance (single ended) Ω - Load impedance (single ended) Ω Typical (1) Maximum 50 (2) - - 50 (2) - MHz - 869 - 300 kHz to 856.4 MHz dB 40 41 - 856.4 MHz to 858.5 MHz dB 20 40 - 879 MHz to 883 MHz dB 20 33 - 883 MHz to 1200 MHz dB 45 50 - 1200 MHz to 2000 MHz dB 35 40 - Maximum insertion loss in 868 MHz-870 MHz dB - 2.4 3.2 Amplitude variation in 868 MHz-870 MHz dB 0.2 0.8 Center frequency fo Absolute attenuation (3) Input VSWR in 868 MHz-870 MHz at 25°C - - 1.4:1 2.0:1 Output VSWR in 868 MHz-870 MHz at 25°C - - 1.4:1 2.0:1 dBm - - 25 Length x Width mm2 - 3.8 x 3.8 - Height mm - 1.35 1.55 Input power in 868 MHz-870 MHz (4) Package type & size Input 2 Output 5 Case Ground 1, 3, 4, 6 To Be Grounded 1, 3, 4, 6 Notes: (1): Typical values are nominal performances at room temperature (2): No external matching circuit is required (3): The amplitude variation is defined as the maximum level - minimum level over the given bandwidth (4): Minimum life time at 50° C superior to 175 000 hours. 2 TEMEX reserves the right to modify herein specifications and information at any time when necessary to provide optimum performance and cost. March 2004 Pin out TEMEX TMX S142 SAW BANDPASS FILTER - ISM - RF Specification (Rev. 2) Operating temperature range: [-40°C ; +85°C] Electrical Parameters Unit Minimum Source impedance (single ended) Ω - Load impedance (single ended) Ω Typical (1) Maximum 50 (2) - - 50 (2) - MHz - 869 - 300 kHz to 856.4 MHz dB 40 41 - 856.4 MHz to 858.5 MHz dB 20 40 - 879 MHz to 883 MHz dB 20 33 - 883 MHz to 1200 MHz dB 45 50 - 1200 MHz to 2000 MHz dB 35 40 - Maximum insertion loss in 868 MHz-870 MHz dB - 2.4 4.5 Amplitude variation in 868 MHz-870 MHz dB 0.2 0.8 Center frequency fo Absolute attenuation (3) Input VSWR in 868 MHz-870 MHz at 25°C - - 1.4:1 2.0:1 Output VSWR in 868 MHz-870 MHz at 25°C - - 1.4:1 2.0:1 dBm - - 25 Length x Width mm2 - 3.8 x 3.8 - Height mm - 1.35 1.55 Input power in 868 MHz-870 MHz (4) Package type & size Input 2 Output 5 Case Ground 1, 3, 4, 6 To Be Grounded 1, 3, 4, 6 Notes: (1): Typical values are nominal performances at room temperature (2): No external matching circuit is required (3): The amplitude variation is defined as the maximum level - minimum level over the given bandwidth (4): Minimum life time at 50° C superior to 175 000 hours. 3 TEMEX reserves the right to modify herein specifications and information at any time when necessary to provide optimum performance and cost. March 2004 Pin out TEMEX TMX S142 SAW BANDPASS FILTER - ISM - RF Specification (Rev. 2) TYPICAL S21RESPONSE The template indicated is linked to the specification over [0 , +55°C] temperature range Frequency response Frequency response Input / Output VSWR Input Smith Chart Output Smith Chart 4 TEMEX reserves the right to modify herein specifications and information at any time when necessary to provide optimum performance and cost. March 2004 Frequency response 2.00 r 0.20 TEMEX reserves the right to modify herein specifications and information at any time when necessary to provide optimum performance and cost. TA-78 CXXX 3.80 r 0.20 3 4 2 5 1 6 5 1.27 r 0.20 1.55 max 3.80 r 0.20 PACKAGE 0.60 r 0.20 TEMEX TMX S142 SAW BANDPASS FILTER - ISM - RF Specification (Rev. 2) DRAWING 1.00 r 0.20