AZ943 15 AMP MINIATURE PC BOARD RELAY FEATURES • • • • • High performance Low seated height Flux tight and sealed versions available UL, CUR file E43203 Class B insulation (130°C) standard CONTACTS Arrangement Ratings UL/CUR Ratings SPST (1 Form A) SPDT (1 Form C) Form A and C Max. switched power: 210 W or 2770 VA Max. switched current: 15 A AC, 7 A DC Max. switched voltage: 30 VDC or 300 VAC 1 Form A 15 A at 125 VAC, general use 10A at 277 VAC, general use, 100,000 cycles TV - 5 120 VAC GENERAL DATA Life Expectancy Mechanical Electrical 1 x 106 1 x 105 at rated load Operate Time 10 ms max. Release Time 5 ms max. (with no coil suppression) Dielectric Strength 1500 Vrms contact to coil (at sea level for 1 min.) 1000 Vrms across contacts 1 Form C 10 A at 277 VAC, general use, 100,000 cycles Insulation Resistance 100 megohms min. at 500 VDC, 50% RH Material AgSnO2 Dropout Greater than 10% of nominal coil voltage Resistance < 100 milliohms initally (24 V, 1 A method) Ambient Temperature COIL Power At Pickup Voltage Max Continuous Dissipation 203 mW 1.0 W at 20°C (68°F) Temperature Rise 27°C (49°F) At nominal coil voltage Operating -40°C(-40°F) to 95°C(203°F) Storage -40°C(-40°F) to 130°C(266°F) Vibration 0.062" DA at 10–55 Hz Shock 10 g Enclosure P.B.T. polyester Terminals Tinned copper alloy, P.C. Max. Solder Temp. 270°C (518°F) Max. Solder Time 5 seconds Max. Solvent Temp. 80°C (176°F) Max. Immersion Time 30 seconds Weight 10 g (at nominal coil voltage) Temperature Max. 130°C (266°F) NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Unsealed relays should not be dip cleaned. 4. Specifications subject to change without notice. ZETTLER electronics Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com [email protected] Telephone +44 (0) 1582 599 600 Fax +44 (0) 1582 599 700 2000-01-21 AZ943 RELAY ORDERING DATA STANDARD RELAYS COIL SPECIFICATIONS Nominal Coil VDC 5 Max. Continuous VDC 8.3 6 10.0 Coil Resistance ±10% 70 ORDER NUMBER Must Operate VDC 3.8 AZ943–1CH–5D AZ943–1CH–5DE 4.5 AZ943–1CH–6D AZ943–1CH–6DE 100 Unsealed Sealed 9 15.0 225 6.8 AZ943–1CH–9D AZ943–1CH–9DE 12 20.0 400 9.0 AZ943–1CH–12D AZ943–1CH–12DE 18 30.0 900 13.5 AZ943-1CH-18D AZ943-1CH-18DE 24 40.0 1,600 18.0 AZ943–1CH–24D AZ943–1CH–24DE 48 67.0 6,200 36.0 AZ943–1CH–48D AZ943–1CH–48DE Substitute “1AH” in place of “1CH” to indicate 1 Form A contact. MECHANICAL DATA Outline Dimensions PC Board Layout .748 [19.0] 5xø.051 [ø1.3] .600 [15.3] .134 [3.4] .059 [1.49] .236 [6.0] .472 [12.0] .618 [15.7] .185 [4.7] .017 [0.43] .559 [14.2] .480 [12.2] VIEWED TOWARD TERMINALS .014 [0.36] .039 [1.0] 4x.016 [0.4] Wiring Diagram 4x.032 [0.8] FORM "A" FORM "C" VIEWED TOWARD TERMINALS Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" ZETTLER electronics Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com [email protected] Telephone +44 (0) 1582 599 600 Fax +44 (0) 1582 599 700 2000-01-21