AZ948 16 AMP LOW PROFILE POWER RELAY FEATURES • • • • • • • High power switching (4000 VA) High sensitivity, 128 mW pickup Low profile (less than .5" height) SPST (1 Form A) Epoxy sealed version available DC coils up to 100 VDC UL file E44211; CSA file LR 702514 CONTACTS GENERAL DATA Arrangement SPST (1 Form A) Ratings Standard Resistive load: Max. switched power: 300 W, 2500 VA Max. switched current: 10 A Max. switched voltage: 250 VAC/125 VDC Heavy Duty Max. switched power: 480 W, 4000 VA Max. switched current: 16 A Max. switched voltage: 250 VAC/125 VDC* *Note: If switching voltage is greater than 30VDC, special precautions must be taken. Please contact the factory. Rated Load UL Standard: 10 A at 30 VDC/250 VAC Heavy Duty: 10 A at 30 VDC 16 A at 250 VAC Min. Load 5 VDC, 0.1 A Material Silver alloy Resistance < 50 milliohms initially (24 V, 1 A voltage drop method) Life Expectancy Mechanical Electrical Minimum operations 1 x 107 1 x 105 at rated load Operate Time (typical) 10 ms at nominal coil voltage Release Time (typical) 4 ms at nominal coil voltage (with no coil suppression) Dielectric Strength 1500 Vrms coil to contact (at sea level for 1 min.) 1000 Vrms contact to contact Insulation Resistance 100 megohms min. at 20°C, 500 VDC, 50% RH Dropout Greater than 10% of nominal coil voltage 100 V coil ≥ 6 VDC Ambient Temperature Operating At nominal coil voltage -40°C (-40°F) to 70°C (158°F) 3-48 V coils -40°C (-48°F) to 60°C (140°F) 100 V coil Storage COIL -40°C (-40°F) to 115°C (239°F) Vibration 0.062" DA at 10–55 Hz Shock 10 g Enclosure P.B.T. polyester Terminals Tinned copper alloy, P.C. 200 mW Max. Solder Temp. 270°C (518°F) Max. Continuous Dissipation 1.8 W at 20°C (68°F) 1.3 W at 40°C (104°F) Max. Solder Time 5 seconds Max. Solvent Temp. 80°C (176°F) Temperature Rise 16°C (29°F) at nominal coil voltage Max. Immersion Time 30 seconds Weight 8 grams Power At Pickup Voltage (typical) Temperature Max. 115°C (239°F) NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. ZETTLER electronics Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com [email protected] Telephone +44 (0) 1582 599 600 Fax +44 (0) 1582 599 700 2000-01-03 AZ948 RELAY ORDERING DATA COIL SPECIFICATIONS SPST-NO (1 Form A) Standard Contact: 10A ORDER NUMBER Nominal Coil VDC 5 Must Operate VDC 4.0 Max. Continuous VDC 15.0 Coil Resistance ±10% 125 Unsealed Sealed AZ948–1A–5D AZ948–1A–5DE 6 4.8 18.0 180 AZ948–1A–6D AZ948–1A–6DE 9 7.2 27.0 405 AZ948–1A–9D AZ948–1A–9DE 12 9.6 36.0 720 AZ948–1A–12D AZ948–1A–12DE 24 19.2 72.0 2,880 AZ948–1A–24D AZ948–1A–24DE 48 38.4 144.0 11,520 AZ948–1A–48D AZ948–1A–48DE 100 48.0 110.0 18,000 AZ948–1A–100D AZ948–1A–100DE COIL SPECIFICATIONS SPST-NO (1 Form A) Heavy Duty Contact: 16A ORDER NUMBER Nominal Coil VDC 5 Must Operate VDC 4.0 Max. Continuous VDC 15.0 Coil Resistance ±10% 125 AZ948–1AT–5D AZ948–1AT–5DE 6 4.8 18.0 180 AZ948–1AT–6D AZ948–1AT–6DE Unsealed Sealed 9 7.2 27.0 405 AZ948–1AT–9D AZ948–1AT–9DE 12 9.6 36.0 720 AZ948–1AT–12D AZ948–1AT–12DE 24 19.2 72.0 2,880 AZ948–1AT–24D AZ948–1AT–24DE 48 38.4 144.0 11,520 AZ948–1AT–48D AZ948–1AT–48DE 100 48.0 110.0 18,000 AZ948–1AT–100D AZ948–1AT–100DE MECHANICAL DATA .866 (22.0) .630 (16.0) .015 .413 (0.4) (10.5) .157 (4.0) PC BOARD LAYOUT 2 1 COM 3 4 .500 (12.7) NO .700 (17.78) .400 (10.16) 2 .035 (.9) 2 places 1 .500 (12.7) 3 WIRING DIAGRAM .051 (1.3) 2 places 4 .400 (10.16) 1 Form A 2 1 COM 3 Viewed toward terminals NO Viewed toward terminals 4 Dimensions in inches with metric equivalents in parentheses. Tolerance: ±0.010" ZETTLER electronics Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com [email protected] Telephone +44 (0) 1582 599 600 Fax +44 (0) 1582 599 700 2000-01-03