Preliminary FM1808 256Kb Bytewide FRAM Memory Features 256K bit Ferroelectric Nonvolatile RAM • Organized as 32,768 x 8 bits • High endurance 10 Billion (1010) read/writes • 10 year data retention at 85° C • NoDelay™ write • Advanced high-reliability ferroelectric process Superior to BBSRAM Modules • No battery concerns • Monolithic reliability • True surface mount solution, no rework steps • Superior for moisture, shock, and vibration • Resistant to negative voltage undershoots Description The FM1808 is a 256-kilobit nonvolatile memory employing an advanced ferroelectric process. A ferroelectric random access memory or FRAM is nonvolatile but operates in other respects as a RAM. It provides data retention for 10 years while eliminating the reliability concerns, functional disadvantages and system design complexities of battery-backed SRAM. It’s fast write and high write endurance makes it superior to other types of nonvolatile memory. In-system operation of the FM1808 is very similar to other RAM based devices. Memory read- and writecycles require equal times. The FRAM memory, however, is nonvolatile due to its unique ferroelectric memory process. Unlike BBSRAM, the FM1808 is a truly monolithic nonvolatile memory. It provides the same functional benefits of a fast write without the serious disadvantages associated with modules and batteries or hybrid memory solutions. These capabilities make the FM1808 ideal for nonvolatile memory applications requiring frequent or rapid writes in a bytewide environment. The availability of a true surface-mount package improves the manufacturability of new designs, while the DIP package facilitates simple design retrofits. The FM1808 offers guaranteed operation over an industrial temperature range of -40°C to +85°C. This data sheet contains design specifications for product development. These specifications may change in any manner without notice. 27 July 2000 SRAM & EEPROM Compatible • JEDEC 32Kx8 SRAM & EEPROM pinout • 70 ns access time • 130 ns cycle time • Equal access & cycle time for reads and writes Low Power Operation • 25 mA active current • 20 µA standby current Industry Standard Configuration • Industrial temperature -40° C to +85° C • 28-pin SOP or DIP Pin Configuration A14 VDD A12 WE A7 A13 A6 A8 A5 A9 A4 A11 A3 OE A2 A10 A1 CE A0 DQ7 DQ0 DQ6 DQ1 DQ5 DQ2 DQ4 VSS DQ3 FM1808-70-P FM1808-70-S FM1808-120-P FM1808-120-S Ordering Information 70 ns access, 28-pin plastic DIP 70 ns access, 28-pin SOP 120 ns access, 28-pin plastic DIP 120 ns access, 28-pin SOP Ramtron International Corporation 1850 Ramtron Drive, Colorado Springs, CO 80921 (800) 545-FRAM, (719) 481-7000, Fax (719) 481-7058 www.ramtron.com 1/12 Ramtron FM1808-70 Figure 1. Block Diagram A10-A14 A0-A14 Address Latch A0-A7 Block Decoder Row Decoder CE A8-A9 Control Logic WE I/O I DQ0-7 /CE 11-13, 15-19 20 I/O I /OE 22 I /WE 27 I VDD VSS 28 14 I I Functional Truth Table /CE /WE H X æ X L H L L 27 July 2000 /OE X X L X 1Kx8 1Kx8 1Kx8 1Kx8 1Kx8 1Kx8 1Kx8 1Kx8 1Kx8 1Kx8 1Kx8 1Kx8 1Kx8 1Kx8 1Kx8 1Kx8 1Kx8 1Kx8 1Kx8 1Kx8 1Kx8 1Kx8 1Kx8 1Kx8 1Kx8 1Kx8 1Kx8 1Kx8 1Kx8 1Kx8 1Kx8 Column Decoder I/O Latch Bus Driver OE Pin Description Pin Name Pin Number A0-A14 1-10, 21, 23-26 1Kx8 DQ0-7 Pin Description Address. The 15 address lines select one of 32,768 bytes in the FRAM array. The address value will be latched on the falling edge of /CE. Data. 8-bit bi-directional data bus for accessing the FRAM array. Chip Enable. /CE selects the device when low. The falling edge of /CE causes the address to be latched internally. Address changes that occur after /CE goes low will be ignored until the next falling edge occurs. Output Enable. When /OE is low the FM1808 drives the data bus when valid data is available. Taking /OE high causes the DQ pins to be tristated. Write Enable. Taking /WE low causes the FM1808 to write the contents of the data bus to the address location latched by the falling edge of /CE. Supply Voltage. 5V Ground. Function Standby/Precharge Latch Address Read Write 2/12 Ramtron FM1808-70 Overview Read Operation The FM1808 is a bytewide FRAM memory. The memory array is logically organized as 32,768 x 8 and is accessed using an industry standard parallel interface. The FM1808 is inherently nonvolatile via its unique ferroelectric process. All data written to the part is immediately nonvolatile with no delay. Functional operation of the FRAM memory is similar to SRAM type devices. The major operating difference between the FM1808 and an SRAM (beside nonvolatile storage) is that the FM1808 latches the address on the falling edge of /CE. A read operation begins on the falling edge of /CE. At this time, the address bits are latched and a memory cycle is initiated. Once started, a full memory cycle must be completed internally even if /CE goes inactive. Data becomes available on the bus after the access time has been satisfied. Memory Architecture Users access 32,768 memory locations each with 8 data bits through a parallel interface. The complete address of 15-bits specifies each of the 32,768 bytes uniquely. Internally, the memory array is organized into 32 blocks of 8Kb each. The 5 most-significant address lines decode one of 32 blocks. This block segmentation has no effect on operation, however the user may wish to group data into blocks by its endurance requirements as explained in a later section. The access and cycle time are the same for read and write memory operations. Writes occur immediately at the end of the access with no delay. Unlike an EEPROM, it is not necessary to poll the device for a ready condition since writes occur at bus speed. A pre-charge operation, where /CE goes inactive, is a part of every memory cycle. Thus unlike SRAM, the access and cycle times are not equal. Note that the FM1808 has no special power-down demands. It will not block user access and it contains no power-management circuits other than a simple internal power-on reset. It is the user’s responsibility to ensure that VDD is within data sheet tolerances to prevent incorrect operation. Memory Operation The FM1808 is designed to operate in a manner very similar to other bytewide memory products. For users familiar with BBSRAM, the performance is comparable but the bytewide interface operates in a slightly different manner as described below. For users familiar with EEPROM, the obvious differences result from the higher write performance of FRAM technology including NoDelay writes and much higher write endurance. 27 July 2000 After the address has been latched, the address value may be changed upon satisfying the hold time parameter. Unlike an SRAM, changing address values will have no effect on the memory operation after the address is latched. The FM1808 will drive the data bus when /OE is asserted to a low state. If /OE is asserted after the memory access time has been satisfied, the data bus will be driven with valid data. If /OE is asserted prior to completion of the memory access, the data bus will not be driven until valid data is available. This feature minimizes supply current in the system by eliminating transients due to invalid data. When /OE is inactive the data bus will remain tri-stated. Write Operation Writes occur in the FM1808 in the same time interval as reads. The FM1808 supports both /CE and /WE controlled write cycles. In all cases, the address is latched on the falling edge of /CE. In a /CE controlled write, the /WE signal is asserted prior to beginning the memory cycle. That is, /WE is low when /CE falls. In this case, the part begins the memory cycle as a write. The FM1808 will not drive the data bus regardless of the state of /OE. In a /WE controlled write, the memory cycle begins on the falling edge of /CE. The /WE signal falls after the falling edge of /CE. Therefore, the memory cycle begins as a read. The data bus will be driven according to the state of /OE until /WE falls. The timing of both /CE and /WE controlled write cycles is shown in the electrical specifications. Write access to the array begins asynchronously after the memory cycle is initiated. The write access terminates on the rising edge of /WE or /CE, whichever is first. Data set-up time, as shown in the electrical specifications, indicates the interval during which data cannot change prior to the end of the write access. Unlike other truly nonvolatile memory technologies, there is no write delay with FRAM. Since the read and write access times of the underlying memory are the same, the user experiences no delay through the bus. 3/12 Ramtron The entire memory operation occurs in a single bus cycle. Therefore, any operation including read or write can occur immediately following a write. Data polling, a technique used with EEPROMs to determine if a write is complete, is unnecessary. Pre-charge Operation The pre-charge operation is an internal condition where the state of the memory is prepared for a new access. All memory cycles consist of a memory access and a pre-charge. The pre-charge is user initiated by taking the /CE signal high or inactive. It must remain high for at least the minimum pre-charge timing specification. The user dictates the beginning of this operation since a pre-charge will not begin until /CE rises. However, the device has a maximum /CE low time specification that must be satisfied. FM1808-70 flexibility, the FM1808 employs a unique memory organization as described below. The memory array is divided into 32 blocks, each 1Kx8. The 5-upper address lines decode the block selection as shown in Figure 2. Data targeted for significantly different numbers of cycles should be located in separate blocks since memory rows do not extend across block boundaries. Figure 2. Address Blocks FFFFh Block 31 FC00h FBFFh Block 30 F800h F7FFh Block 29 Endurance and Memory Architecture Data retention is specified in the electrical specifications below. This section elaborates on the relationship between data retention and endurance. F400h F3FFh Block 28 Block 27 FRAM offers substantially higher write endurance than other nonvolatile memories. Above a certain level, however, the effect of increasing memory accesses on FRAM produces an increase in the soft error rate. There is a higher likelihood of data loss but the memory continues to function properly. This effect becomes significant only after 100 million (1E8) read/write cycles, far more than allowed by other nonvolatile memory technologies. Endurance is a soft specification. Therefore, the user may operate the device with different levels of cycling for different portions of the memory. For examp le, critical data needing the highest reliability level could be stored in memory locations that receive comparatively few cycles. Data with frequent changes or shorter-term use could be located in an area receiving many more cycles. A scratchpad area, needing little if any retention can be cycled virtually without limit. Internally, a FRAM operates with a read and restore mechanism similar to a DRAM. Therefore, each cycle be it read or write, involves a change of state. The memory architecture is based on an array of rows and columns. Each access causes an endurance cycle for an entire row. Therefore, data locations targeted for substantially differing numbers of cycles should not be located within the same row. To balance the endurance cycles and allow the user the maximum 27 July 2000 Block 4 Block 3 F000h EFFFh 1000h 0FFFh 0C00h 0BFFh Block 2 0800h 07FFh Block 1 0400h 03FFh Block 0 0000h Each block of 1Kx8 consists of 256 rows and 4 columns. The address lines A0-A7 decode row selection and A8-A9 lines decode column selection. This scheme facilitates a relatively uniform distribution of cycles across the rows of a block. By allowing the address LSBs to decode row selection, the user avoids applying multiple cycles to the same row when accessing sequential data. For example, 256 bytes can be accessed sequentially without accessing the same row twice. In this example, one cycle would be applied to each row. An entire block of 1Kx8 can be read or written with only four cycles applied to each row. Figure 3 illustrates the organization within a memory block. 4/12 Ramtron FM1808-70 Figure 3. Row and Column Organization Row 255 Row 254 Row 253 Row 252 Row 3 Row 2 Row 1 10b Block 4 A14-A10 00100b Row 0 A9-A8 11b 01b 00b A0-A7 00h 01h 02h 03h FCh FDh FEh FFh Applications As the first truly nonvolatile RAM, the FM1808 fits into many diverse applications. Clearly, its monolithic nature and high performance make it superior to battery-backed SRAM in most every application. This applications guide is intended to facilitate the transition from BBSRAM to FRAM. It is divided into two parts. First is a treatment of the advantages of FRAM memory compared with battery-backed SRAM. Second is a design guide, which highlights the simple design considerations that should be reviewed in both retrofit and new design situations. FRAM Advantages Although battery-backed SRAM is a mature and established solution, it has numerous weaknesses. These stem, directly or indirectly from the presence of the battery. FRAM uses an inherently nonvolatile storage mechanism that requires no battery. It therefore eliminates these weaknesses. The major considerations in upgrading to FRAM are as follows. Construction Issues 1. Cost The cost of both the component and the manufacturing overhead of battery-backed SRAM is high. FRAM with its monolithic construction is inherently a lower cost solution. In addition, there is no ‘built-in’ rework step required for battery attachment when using surface mount parts. Therefore assembly is streamlined and more cost effective. In the case of DIP battery-backed modules, the user is constrained to through-hole assemb ly techniques and a board wash using no water. 2. Humidity A typical battery-backed SRAM module is qualified at 60º C, 90% Rh, no bias, and no pressure. This is because the multi-component assemblies are vulnerable to moisture, not to mention dirt. FRAM is 27 July 2000 qualified using HAST – highly accelerated stress test. This requires 120º C at 85% Rh, 24.4 psia at 5.5V. 3. System reliability Data integrity must be in question when using a battery-backed SRAM. They are inherently vulnerable to shock and vibration. If the battery contact comes loose, data will be lost. In addition a negative voltage, even a momentary undershoot, on any pin of a battery-backed SRAM can cause data loss. The negative voltage causes current to be drawn directly from the battery. These momentary short circuits can greatly weaken a battery and reduce its capacity over time. In general, there is no way to monitor the lost battery capacity. Should an undershoot occur in a battery backed system during a power down, data can be lost immediately. 4. Space Certain disadvantages of battery-backed, such as susceptibility to shock, can be reduced by using the old fashioned DIP module. However, this alternative takes up board space, height, and dictates throughhole assembly. FRAM offers a true surface-mount solution that uses 25% of the board space. No multi-piece assemblies, no connectors, and no modules. A real nonvolatile RAM is finally available! Direct Battery Issues 5. Field maintenance Batteries, no matter how mature, are a built-in maintenance problem. They eventually must be replaced. Despite long life projections, it is impossible to know if any individual battery will last considering all of the factors that can degrade them. 6. Environmental Lithium batteries are widely regarded as environmental problem. They are a potential hazard and proper disposal can be a burden. addition, shipping of lithium batteries may restricted. an fire In be 7. Style! Backing up an SRAM with a battery is an oldfashioned approach. In many cases, such modules are the only through-hole component in sight. FRAM is the latest memory technology and it is changing the way systems are designed. FRAM is nonvolatile and writes fast -- no battery required! 5/12 Ramtron FM1808-70 The main design issue is to create a decoder scheme that will drive /CE active, then inactive for each address. This accomplishes the two goals of latching the new address and creating the precharge period. FRAM Design Considerations When designing with FRAM for the first time, users of SRAM will recognize a few minor differences. First, bytewide FRAM memories latch each address on the falling edge of chip enable. This allows the address bus to change after starting the memory access. Since every access latches the memory address on the falling edge of /CE, users should not ground it as they might with SRAM. A second design consideration relates to the level of VDD during operation. Battery-backed SRAMs are forced to monitor VDD in order to switch to battery backup. They typically block user access below a certain VDD level in order to prevent loading the battery with current demand from an active SRAM. The user can be abruptly cut off from access to the nonvolatile memory in a power down situation with no warning or indication. Users that are modifying existing designs to use FRAM should examine the hardware address decoders. Decoders should be modified to qualify addresses with an address valid signal if they do not already. In many cases, this is the only change required. Systems that drive chip enable active, then inactive for each valid address may need no modifications. An example of the target signal relationships are shown in Figure 4. Also shown is a common SRAM signal relationship that will not work for the FM1808. FRAM memories do not need this system overhead. The memory will not block access at any VDD level. The user, however, should prevent the processor from accessing memory when VDD is out-oftolerance. The common design practice of holding a processor in reset when VDD drops is adequate; no special provisions must be taken for FRAM design. Figure 4. Memory Address Relationships Valid Memory Read Relationship FRAM Signaling CE Address A1 A2 Data SRAM Signaling D1 D2 Invalid Memory Read Relationship CE Address Data 27 July 2000 A1 A2 D1 D2 6/12 Ramtron FM1808-70 Electrical Specifications Absolute Maximum Ratings Description Ambient storage or operating temperature Voltage on any pin with respect to ground Lead temperature (Soldering, 10 seconds) Ratings -40°C to + 85°C -1.0V to +7.0V 300° C Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only, and the functional operation of the device at these or any other conditions above those listed in the operational section of this specification is not implied. Exposure to absolute maximum ratings conditions for extended periods may affect device reliability DC Operating Conditions TA = -40° C to + 85° C, VDD = 4.5V to 5.5V unless otherwise specified Symbol Parameter Min Typ Max Units Notes VDD Power Supply 4.5 5.0 5.5 V 1 IDD VDD Supply Current 180 ns cycle 7 15 mA 2 IDD VDD Supply Current 120 ns cycle 12 25 mA 2 ISB Standby Current - TTL 400 µA 3 ISB Standby Current - CMOS 7 20 µA 4 ILI Input Leakage Current 10 µA 5 ILO Output Leakage Current 10 µA 5 VIL Input Low Voltage -1.0 0.8 V 1 VIH Input High Voltage 2.0 VDD + 1.0 V 1 VOL Output Low Voltage 0.4 V 1,6 VOH Output High Voltage 2.4V V 1,7 Notes 1. Referenced to VSS. 2. VDD = 5.5V, /CE cycling at minimum cycle time, 130 ns for –70 and 180 ns for -120. All inputs at CMOS levels, all outputs unloaded. 3. VDD = 5.5V, /CE at VIH, All inputs at TTL levels, all outputs unloaded. 4. VDD = 5.5V, /CE at VIH, All inputs at CMOS levels, all outputs unloaded. 5. VIN, VOUT between VDD and VSS. 6. IOL = 4.2 mA 7. IOH = -2.0 mA 27 July 2000 7/12 Ramtron FM1808-70 Read Cycle AC Parameters TA = -40° C to + 85° C, VDD = 4.5V to 5.5V unless otherwise specified Symbol Parameter -70 -120 Min Max Min Max tCE Chip Enable Access Time (to data valid) 70 120 tCA Chip Enable Active Time 70 10,000 120 10,000 tRC Read Cycle Time 130 180 tPC Precharge Time 60 60 tAS Address Setup Time 5 5 tAH Address Hold Time 10 10 tOE Output Enable Access Time 10 10 tHZ Chip Enable to Output High-Z 15 15 tOHZ Output Enable to Output High-Z 15 15 Units Notes ns ns ns ns ns ns ns ns ns 1 1 Write Cycle AC Parameters TA = -40° C to + 85° C, VDD = 4.5V to 5.5V unless otherwise specified Symbol Parameter -70 -120 Units Min Max Min Max tCA Chip Enable Active Time 70 10,000 120 10,000 ns tCW Chip Enable to Write High 70 120 ns tWC Write Cycle Time 130 180 ns tPC Precharge Time 60 60 ns tAS Address Setup Time 0 0 ns tAH Address Hold Time 10 10 ns tWP Write Enable Pulse Width 40 40 ns tDS Data Setup 30 40 ns tDH Data Hold 5 5 ns tWZ Write Enable Low to Output High Z 15 15 ns tWX Write Enable High to Output Driven 10 10 ns tHZ Chip Enable to Output High-Z 15 15 ns tWS Write Setup 0 0 ns tWH Write Hold 0 0 ns Notes 1 This parameter is periodically sampled and not 100% tested. 2 The relationship between /CE and /WE determines if a /CE- or /WE-controlled write occurs. There is specification associated with this relationship. Notes 1 1 1 2 2 no timing Power Cycle Timing TA = -40° C to + 85° C, VDD = 4.5V to 5.5V unless otherwise specified Symbol Parameter Min Units Notes tPU VDD Min to First Access Start 1 µS tPD Last Access Complete to VDD Min 0 µS Capacitance TA = 25° C , f=1.0 MHz, VDD = 5V Symbol Parameter Max CI/O Input Output Capacitance 8 CIN Input Capacitance 6 27 July 2000 Units pF pF Notes 8/12 Ramtron FM1808-70 AC Test Conditions Input Pulse Levels Input rise and fall times Input and output timing levels Equivalent AC Load Circuit 0 to 3V 10 nS 1.5V Read Cycle Timing tRC tCA tPC CE tAS tAH A0-17 tOE OE tOHZ DQ0-7 tCE tHZ Write Cycle Timing - /CE Controlled Timing tWC tCA tPC CE tAS tAH A0-17 tWS tWH WE OE tDS tDH DQ0-7 27 July 2000 9/12 Ramtron FM1808-70 Write Cycle Timing - /WE Controlled Timing tWC tCA tPC CE tAH tAS A0-17 tWH tWS tWP WE OE tWZ tWX DQ0-7 out tDS tDH DQ0-7 in Power Cycle Timing VDD VDD min VDD min tPD tPC tPU CE Data Retention TA = -40° C to + 85° C, VDD = 4.5V to 5.5V unless otherwise specified Parameter Min Units Notes Data Retention 10 years 1 Notes 1. Data retention is specified at 85° C. The relationship between retention, temperature, and the associated reliability level is characterized in a separate reliability report. 27 July 2000 10/12 Ramtron FM1808-70 28-pin SOP JEDEC MS -013 Index Area E H Pin 1 D h A B e A1 45° α .10 mm .004 in. L C Selected Dimensions For complete dimensions and notes, refer to JEDEC MS-013 Controlling dimensions is in millimeters. Conversions to inches are not exact. Symbol A A1 B C D E e H h L α 27 July 2000 Dim mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. Min 2.35 0.0926 0.10 0.004 0.33 0.013 0.23 0.0091 17.70 0.6969 7.40 0.2914 Nom. Max 2.65 0.1043 0.30 0.0118 0.51 0.020 0.32 0.0125 18.10 0.7125 7.60 0.2992 1.27 BSC 0.050 BSC 10.00 0.394 0.25 0.010 .40 0.016 0° 10.65 0.419 0.75 0.029 1.27 0.050 8° 11/12 Ramtron FM1808-70 28-pin DIP JEDEC MS -011 E1 Index Area E D A2 A1 D1 e b A eA eB B1 Selected Dimensions For complete dimensions and notes, refer to JEDEC MS-011 Controlling dimensions is in inches. Conversions to millimeters are not exact. Symbol A A1 A2 B B1 D D1 E E1 e eA eB L 27 July 2000 Dim in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm Min Nom. 0.015 0.39 0.125 3.18 0.014 0.356 0.030 0.77 1.380 35.1 0.005 0.13 0.600 15.24 0.485 12.32 Max 0.250 6.35 0.195 4.95 0.022 0.558 0.070 1.77 1.565 39.7 0.625 15.87 0.580 14.73 0.100 BSC 2.54 BSC 0.600 BSC 15.24 BSC 0.115 2.93 0.700 17.78 0.200 5.08 12/12