ETC MKP383S

Electronic
components CZ
MKP Metallized Polypropylene
Film Capacitors
MKP 380S - 386S
5
40
Lmax
Construction of capacitors:
Metallized polypropylen film capacitors noninductive construction, cylindric shape, self-healing ability,
Leads: tinned cooper wire Surface coating by yellow polyester film tape wraped, epoxy resin sealed
Flame retardand construction available upon request also UL 94 V-0
5
Reference standards:
General specifications: IEC 60384-1, EN 130 000
Sectional specifications:IEC 60386-16, CECC 31 200
d
40
Syllabova 380/41, 703 00 OSTRAVA - Vítkovice
Phone: +420/ 595 781 623, 596 623 385
Fax: +420/ 595 781 612, 596 623 386
E - mail: [email protected]
Web Site:http://www.es-ostrava.cz
D max
L1
Nominal capacitanceCR: see table
Other values on request. Nominal capacitance values are based on the E6 serie in accordance
to IEC 63 publ. or arbitrary values in capacitance range on request.
Tolerance of capacitance: ± 20% (M), ± 10% (K), ± 5%(J),
arbitrary tolerances on request
L max (mm)
11
14
19
26
31
36
d (mm)
0,6
0,6
0,6 0,8
0,8
0,8
L1 (mm)
16
20
25
32,5 37,5 41
Insulation resistance Ris:
C Î 0,33µF Ris min. 100 000 MÂ
C > 0,33µF tis min. 30 000 sec.
Time constant tis: tis=Ris . C [sec;MÂ;µF]
Rated voltage UR [DC/AC 50-60 Hz] - see table.
Climatic category: 55/100/56 (IEC 60068-1)
Maximum pulse rise time dU/dt [V/µsec]
Working Temperature range: - 55°C ÷ +100°C
Lmax (mm)
UR
160
250
400
630
1000
1600
2000
Î 14
î 31
26
19
dU/dt [V/ µs] max.
45
75
60
100
100
150
120
200
160
250
200
300
450
650
100
120
200
250
300
500
750
30
45
60
100
140
175
250
CRÎ 0,1µF
0,0006
0,0010
0,0030
0,1µFÎ CRÎ1µF
0,0006
0,0020
CR>1µF
0,0006
Operating voltage dependence on ambient temperature
Uop/UR [%]
Type
MKP 380S MKP 381S MKP 382S MKP 383S MKP 384S MKP 385S MKP 386S
Nominal voltage 160
UR DC/AC
100
Dissipation factor tgç at +25°C max.
1 kHz
10 kHz
100 kHz
Test voltage between terminations: UT=1,6 × UR for 2 sec. at anbient temperature +25°C±5°C
100
80
60
40
250
160
630
250 *
1000
400 *
1600
630
2000
700
5x19
5x19
5x19
6x19
5x26,5
5,5x26,5
6,5x26,5
7x26,5
8x26,5
9,5x26,5
10,5x26,5
13,5x26,5
12,5x31,5
15,5x31,5
16x31,5
22x31,5
5x26,5
5x26,5
5x26,5
7x26,5
5x31,5
6,5x31,5
7x31,5
7,5x31,5
8x31,5
9x31,5
10,5x31,5
12,5x31,5
15x31,5
18x31,5
22x31,5
Maximal dimensions
D x L (mm)
Nom. capac.CR
1000 pF
1500
2200
3300
4700
6800
0,010 µF
0,015
0,022
0,033
0,047
0,068
0,10 µF
0,15
0,22
0,33
0,47
0,68
1,0 µF
1,5
2,2
3,3
4,7
6,8
10 µF
400
220 *
7x11
7,5x14
8,5x14
10x14
8x19
9x19
10,5x19
10x26
12,5x26
14,5x26
16x31
19x31
21x36
5x11
5x14
6x14
8,5x14
5x19
6x19
7x19
7,5x26
8x26
9x26
9,5x31
11x31
13,5x31
16x31
17,5x36
5x11
5x14
5,5x14
6,5x14
5,5x19
6x19
6,5x19
7x19
7x26
8x26
9,5x26
10x31
11,5x31
14x31
16x31
18x36
21,5x36
5x11
5x11
5x11
5x11
5,5x11
5,5x14
5,5x14
6x14
5,5x19
6,5x19
7x19
8x19
7,5x26
8x26
8,5x26
9x31
10x31
12x31
15x31
17,5x36
20,5x36
5x11
5x14
5x14
5x14
5,5x19
5,5x19
5,5x19
5,5x19
7x26
8x26
9x26
8x31
9,5x31
11x31
13x31
14,5x31
17x31
19x36
21x36
* this capacitors are not suitable for across the line applications
The manufacturer is not responsible for any damages, caused by the improper
instalation and application.
20
-60
-40
-20
0
20
40
60
80
100
[°C]
K150302-3
MKP Metallized Polypropylene
Film Capacitors
Maximum AC voltage dependence on frequency
Electronic
components CZ
Syllabova 380/41, 703 00 OSTRAVA - Vítkovice
Phone: +420/ 595 781 623, 596 623 385
Fax: +420/ 595 781 612, 596 623 386
E - mail: [email protected]
Web Site:http://www.es-ostrava.cz
Upper operating temperature:
The max. temperature measured on the case surface at which the capacitor can work continualy.
MKP capacitors have the upper operating temperature +100°C, at any rate +105°C and corresponds to
the upper category temperature
Category voltage UC:
The maximum direct voltage, or the maximum r.m.s. voltage or the max. value of a voltage pulse,
which may be continuously applied to the terminals of a capacitors till to the rated temperature.
For the MKP up to +85°C UC=UR. For temperatures between +85°C and +100°C a decreasing factor of
1,25%/°C on the rated voltage UR has to be applied.
Pulse loading:
The capacitors charged which unsinusoidal voltage pulses with quick rise (high dU/dt)
will be loaded with high current pulses. The current pulse must be limited in order to
not overload or not destroy the internal contact and connections.
The limit of alowed current loading is given with allowed voltage rise in time dU/dt [V/µsec]
Minimum resistance in series with capacitor is
Rs=UR/CR × dU/dt
UR - rated voltage [V]
CR - nominal capacitance [µF]
Rs - [Ohm]
If the max. pulse voltage is less than the rated voltage, higher dU/dt values can be permited
dUOP/dt = dUR/dt × UR/UOP
UR - rated votage
UOP - working voltade amplitude
Permisible AC Voltage:
It is the pure sine wave voltagethat may be applied to the capacitor at the frequency up to 50/60 Hz.
For the operation at higher frequencies refer to permisible AC voltage versus frequency graphs.
Time constant tis:
The time constant is used to express the quality of insulance for higher capacities and is expressed in
second with the following formula:
tis=Ris . C [sec;MÂ;µF]
K150302-3