TI TS5A26542YZTR

TS5A26542
www.ti.com
SCDS232E – JUNE 2006 – REVISED DECEMBER 2009
0.75-Ω DUAL SPDT ANALOG SWITCH WITH INPUT LOGIC TRANSLATION
Check for Samples: TS5A26542
FEATURES
APPLICATIONS
•
•
•
•
•
•
•
•
•
•
•
•
1
2
•
•
Specified Break-Before-Make Switching
Low ON-State Resistance (0.75 Ω Max)
Control Inputs Reference to VIO
Low Charge Injection
Excellent ON-State Resistance Matching
Low Total Harmonic Distortion (THD)
2.25-V to 5.5-V Power Supply (V+)
1.65-V to 1.95-V Logic Supply (VIO)
Latch-Up Performance Exceeds 100 mA Per
JESD 78, Class II
ESD Performance Tested Per JESD 22
– 2000-V Human-Body Model
(A114-B, Class II)
– 1000-V Charged-Device Model (C101)
– 300-V Machine Model (A115-A)
COM Inputs
– 8000-V Human-Body Model
(A114-B, Class II)
– ±15-kV Contact Discharge (IEC 61000-4-2)
Cell Phones
PDAs
Portable Instrumentation
YZT PACKAGE(1)
(BOTTOM VIEW)
A B C D
1
2
3
(1)The
3
4
9
10
2
5
8
11
1
6
7
12
GND balls are internally connected.
1
A
IN1
B
NO1
C
COM1
D
NC1
2
VIO
GND
GND
V+
3
IN2
NO2
COM2
NC2
DESCRIPTION
The TS5A26542 is a dual single-pole double-throw (SPDT) analog switch that is designed to operate from 2.25 V
to 5.5 V. The device offers a low ON-state resistance with an excellent channel-to-channel ON-state resistance
matching, and the break-before-make feature to prevent signal distortion during the transferring of a signal from
one path to the another. The device has excellent total harmonic distortion (THD) performance and consumes
very low power. These features make this device suitable for portable audio applications.
The TS5A26542 has a separate logic supply pin (VIO) that operates from 1.65 V to 1.95 V. VIO powers the control
circuitry, which allows the TS5A26542 to be controlled by 1.8-V signals.
Table 1. ORDERING INFORMATION
TA
–40°C to 85°C
(1)
(2)
PACKAGE (1)
NanoFree™ – WCSP (DSBGA)
0.23-mm Large Bump – YZT
(Pb-free) 0.625-mm max height
ORDERABLE PART NUMBER
Reel of 3000
TS5A26542YZTR
TOP-SIDE MARKING (2)
_ _ _ JN_
For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the
TI website at www.ti.com.
YZT: The actual top-side marking has three preceding characters to denote year, month, and sequence code, and one following
character to designate the assembly/test site. Pin 1 identifier indicates solder-bump composition (1 = SnPb, • = Pb-free).
1
2
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
NanoFree is a trademark of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2006–2009, Texas Instruments Incorporated
TS5A26542
SCDS232E – JUNE 2006 – REVISED DECEMBER 2009
www.ti.com
SUMMARY OF CHARACTERISTICS (1)
2:1 Multiplexer/Demultiplexer
(2 × SPDT)
Configuration
Number of channels
2
ON-state resistance (ron)
0.75 Ω max
ON-state resistance match (Δron)
0.1 Ω max
ON-state resistance flatness (ron(flat))
0.1 Ω max
Turn-on/turn-off time (tON/tOFF)
25 ns/20 ns
Charge injection (QC)
15 pC
Bandwidth (BW)
43 MHz
OFF isolation (OISO)
–63 dB at 1 MHz
Crosstalk (XTALK)
–63 dB at 1 MHz
Total harmonic distortion (THD)
0.004%
Leakage current (INO(OFF)/INC(OFF))
20 nA
Package option
(1)
12-pin WCSP
V+ = 5 V, TA = 25°C
FUNCTION TABLE
NC TO COM,
COM TO NC
NO TO COM,
COM TO NO
L
ON
OFF
H
OFF
ON
IN
LOGIC DIAGRAM
IN1
(See Note A)
NC1
COM1
NO1
NC2
COM2
NO2
IN2
(See Note A)
A.
2
IN1 and IN2 are control inputs referenced to VIO.
Submit Documentation Feedback
Copyright © 2006–2009, Texas Instruments Incorporated
Product Folder Link(s): TS5A26542
TS5A26542
www.ti.com
SCDS232E – JUNE 2006 – REVISED DECEMBER 2009
ABSOLUTE MAXIMUM RATINGS (1)
(2)
over operating free-air temperature range (unless otherwise noted)
V+
VIO
Supply voltage range
VNC
VNO
VCOM
Analog voltage range (3)
II/OK
Analog port diode current
INC
INO
ICOM
ON-state switch current
VI
Digital input voltage range (3)
IIK
Digital input clamp current
I+
IGND
Continuous current through V+ or GND
θJA
Package thermal impedance (7)
Tstg
Storage temperature range
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(3)
(4) (5)
VNO, VNC, VCOM < 0 or VNO, VNC, VCOM > V+
ON-state peak switch current (6)
VNO, VNC, VCOM = 0 to V+
(4)
VI < 0
MIN
MAX
–0.5
6.5
V
–0.5
V+ + 0.5
V
–50
50
–450
450
–700
700
–0.5
6.5
UNIT
mA
mA
V
–50
–100
–65
mA
100
mA
102
°C/W
150
°C
Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum
All voltages are with respect to ground, unless otherwise specified.
The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed.
This value is limited to 5.5 V maximum.
Pulse at 1-ms duration <10% duty cycle
The package thermal impedance is calculated in accordance with JESD 51-7.
Submit Documentation Feedback
Copyright © 2006–2009, Texas Instruments Incorporated
Product Folder Link(s): TS5A26542
3
TS5A26542
SCDS232E – JUNE 2006 – REVISED DECEMBER 2009
www.ti.com
ELECTRICAL CHARACTERISTICS FOR 5-V SUPPLY (1)
V+ = 4.5 V to 5.5 V, VIO = 1.65 V to 1.95 V, TA = –40°C to 85°C (unless otherwise noted)
PARAMETER
SYMBOL
TEST CONDITIONS
TA
V+
MIN
TYP
MAX
UNIT
Analog Switch
Analog signal range
VCOM,
VNO
ON-state resistance
ron
VNO or VNC = 2.5 V,
ICOM = –100 mA,
Switch ON,
See Figure 14
ON-state resistance
match between
channels
Δron
VNO or VNC = 2.5 V,
ICOM = –100 mA,
Switch ON,
See Figure 14
0 ≤ (VNO or VNC) ≤ V+,
ICOM = –100 mA,
Switch ON,
See Figure 14
VNO or VNC = 1 V, 1.5 V,
2.5 V,
ICOM = –100 mA,
Switch ON,
See Figure 14
ON-state resistance
flatness
NO, NC
OFF leakage current
NC, NO
ON leakage current
COM
ON leakage current
ron(flat)
INO(OFF),
INC (OFF)
INO(ON)
ICOM(ON)
0
VNO = 1 V, 4.5 V,
VCOM = 4.5 V, 1 V,
VNC = Open,
or
VNC = 1 V, 4.5 V,
VCOM = 4.5 V, 1 V,
VNO = Open,
VNO = 1 V, 4.5 V,
VNC and VCOM = Open,
or
VNC = 1V, 4.5 V,
VNO and VCOM = Open,
VCOM = 1 V,
VNO and VNC = Open,
or
VCOM = 4.5 V,
VNO and VNC = Open,
25°C
Full
0.05
4.5 V
Full
Full
Ω
0.25
Ω
0.25
5.5 V
5.5 V
–200
20
100
2
–200
–20
5.5 V
2
–100
–20
25°C
See Figure 16
0.1
–20
25°C
Switch ON,
See Figure 16
Ω
0.1
Full
Full
V
0.1
0.1
25°C
25°C
0.75
0.8
4.5 V
25°C
Switch OFF,
See Figure 15
0.5
4.5 V
25°C
Full
V+
20
200
2
nA
nA
20
200
nA
Digital Control Inputs (IN1, IN2) (2)
Input logic high
VIH
VIO = 1.65 V to 1.95 V
Full
0.65 × VIO
VIO
V
Input logic low
VIL
VIO = 1.65 V to 1.95 V
Full
0
0.35 × VIO
V
Input leakage
current
IIH, IIL
(1)
(2)
4
VI = VIO or 0
25°C
Full
5.5 V
–2
2
–20
20
nA
The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum
All unused digital inputs of the device must be held at VIO or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
Submit Documentation Feedback
Copyright © 2006–2009, Texas Instruments Incorporated
Product Folder Link(s): TS5A26542
TS5A26542
www.ti.com
SCDS232E – JUNE 2006 – REVISED DECEMBER 2009
ELECTRICAL CHARACTERISTICS FOR 5-V SUPPLY (1) (continued)
V+ = 4.5 V to 5.5 V, VIO = 1.65 V to 1.95 V, TA = –40°C to 85°C (unless otherwise noted)
PARAMETER
SYMBOL
TEST CONDITIONS
TA
V+
MIN
1
TYP MAX
UNIT
Dynamic
Turn-on time
tON
VCOM = V+,
RL = 50 Ω,
CL= 35 pF,
See Figure 18
25°C
5V
Full
4.5 V
Turn-off time
tOFF
VCOM = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 18
25°C
5V
Full
4.5 V
Break-before-make
time
tBBM
VNC = VNO = V+/2,
RL = 50 Ω,
CL = 35 pF,
See Figure 19
25°C
5V
1
Full
4.5 V
1
Charge injection
QC
VGEN = 0,
RGEN = 0,
CL = 1 nF,
See Figure 23
25°C
5V
15
pC
NO
OFF capacitance
CNO(OFF)
VNO = V+ or GND,
Switch OFF,
See Figure 17
25°C
5V
37
pF
NC, NO
ON capacitance
CNC(ON),
CNO(ON)
VNC or VNO = V+ or
GND,
Switch ON,
See Figure 17
25°C
5V
130
pF
COM
ON capacitance
CCOM(ON)
VCOM = V+ or GND,
Switch ON,
See Figure 17
25°C
5V
130
pF
VI = VIO or GND,
See Figure 17
25°C
5V
6.5
pF
Digital input
capacitance
CI
12.5
25
30
1
9.5
20
25
5
10
12
ns
ns
ns
Bandwidth
BW
RL = 50 Ω,
Switch ON,
See Figure 20
25°C
5V
43
MHz
OFF isolation
OISO
RL = 50 Ω,
f = 1 MHz,
See Figure 21
25°C
5V
–63
dB
Crosstalk
XTALK
RL = 50 Ω,
f = 1 MHz,
See Figure 22
25°C
5V
–63
dB
Total harmonic
distortion
THD
RL = 600 Ω,
CL = 50 pF,
f = 20 Hz to 20 kHz,
See Figure 24
25°C
5V
0.004
%
Supply
Positive supply
current
(1)
I+
VI = VIO or GND
25°C
Full
5.5 V
5.5
100
750
nA
The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum
Submit Documentation Feedback
Copyright © 2006–2009, Texas Instruments Incorporated
Product Folder Link(s): TS5A26542
5
TS5A26542
SCDS232E – JUNE 2006 – REVISED DECEMBER 2009
www.ti.com
Electrical Characteristics for 3.3-V Supply (1)
V+ = 3 V to 3.6 V, VIO = 1.65 V to 1.95 V, TA = –40°C to 85°C (unless otherwise noted)
PARAMETER
SYMBOL
TEST CONDITIONS
TA
V+
MIN
TYP
MAX
UNIT
Analog Switch
Analog signal range
VCOM,
VNO
ON-state resistance
ron
ON-state resistance
match between
channels
Δron
ON-state resistance
flatness
NO, NC
OFF leakage current
NC, NO
ON leakage current
COM
ON leakage current
ron(flat)
INO(OFF),
INC (OFF)
INO(ON)
ICOM(ON)
0
VNO or VNC = 2 V,
ICOM = –100 mA,
Switch ON,
See Figure 14
VNO or VNC = 2 V, 0.8 V,
ICOM = –100 mA,
Switch ON,
See Figure 14
0 ≤ (VNO or VNC) ≤ V+,
ICOM = –100 mA,
Switch ON,
See Figure 14
VNO or VNC = 0.8 V, 2 V,
ICOM = –100 mA,
Switch ON,
See Figure 14
VNO = 1 V, 3 V,
VCOM = 3 V, 1 V,
VNC = Open,
or
VNC = 1 V, 3 V,
VCOM = 3 V, 1 V,
VNO = Open,
Switch OFF,
See Figure 15
VNO = 1 V, 3 V,
VNC and VCOM = Open,
or
VNC = 1 V, 3 V,
VNO and VCOM = Open,
Switch ON,
See Figure 16
VCOM = 1 V,
VNO and VNC = Open,
or
VCOM = 3 V,
VNO and VNC = Open,
25°C
Full
0.1
0.1
3.6 V
3.6 V
0.3
Ω
–30
20
50
2
30
–10
3.6 V
2
–50
–10
25°C
Full
Ω
0.3
–20
25°C
Full
Ω
0.2
3V
Full
Full
V
0.15
0.15
25°C
25°C
0.9
1.2
3V
25°C
See Figure 16
0.75
3V
25°C
Full
V+
10
30
2
nA
nA
10
30
nA
Digital Control Inputs (IN1, IN2) (2)
Input logic high
VIH
VIO = 1.65 V to 1.95 V
Full
0.65 × VIO
VIO
V
Input logic low
VIL
VIO = 1.65 V to 1.95 V
Full
0
0.35 × VIO
V
Input leakage current
(1)
(2)
6
IIH, IIL
VI = VIO or 0
25°C
Full
3.6 V
–2
2
–20
20
nA
The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum
All unused digital inputs of the device must be held at VIO or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
Submit Documentation Feedback
Copyright © 2006–2009, Texas Instruments Incorporated
Product Folder Link(s): TS5A26542
TS5A26542
www.ti.com
SCDS232E – JUNE 2006 – REVISED DECEMBER 2009
ELECTRICAL CHARACTERISTICS FOR 3.3-V SUPPLY (1) (continued)
V+ = 3 V to 3.6 V, VIO = 1.65 V to 1.95 V, TA = –40°C to 85°C (unless otherwise noted)
PARAMETER
SYMBOL
TEST CONDITIONS
TA
V+
MIN
TYP MAX
UNIT
Dynamic
Turn-on time
tON
VCOM = V+,
RL = 50 Ω,
CL= 35 pF,
See Figure 18
25°C
3.3 V
5
Full
3V
3
15
30
Turn-off time
tOFF
VCOM = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 18
25°C
3.3 V
1
Full
3V
1
Break-before-make
time
tBBM
VNC = VNO = V+/2,
RL = 50 Ω,
CL = 35 pF,
See Figure 19
25°C
3.3 V
1
Full
3V
1
VGEN = 0,
RGEN = 0,
CL = 1 nF,
See Figure 23
25°C
3.3 V
6.5
pC
35
9
20
25
8
13
15
ns
ns
ns
Charge injection
QC
NO
OFF capacitance
CNO(OFF)
VNO = V+ or GND,
Switch OFF,
See Figure 17
25°C
3.3 V
38
pF
NC, NO
ON capacitance
CNC(ON),
CNO(ON)
VNC or VNO = V+ or
GND,
Switch ON,
See Figure 17
25°C
3.3 V
133
pF
COM
ON capacitance
CCOM(ON)
VCOM = V+ or GND,
Switch ON,
See Figure 17
25°C
3.3 V
133
pF
VI = VIO or GND,
See Figure 17
25°C
3.3 V
6.5
pF
Digital input
capacitance
CI
Bandwidth
BW
RL = 50 Ω,
Switch ON,
See Figure 20
25°C
3.3 V
42
MHz
OFF isolation
OISO
RL = 50 Ω,
f = 1 MHz,
See Figure 21
25°C
3.3 V
–63
dB
Crosstalk
XTALK
RL = 50 Ω,
f = 1 MHz,
See Figure 22
25°C
3.3 V
–63
dB
Total harmonic
distortion
THD
RL = 600 Ω,
CL = 50 pF,
f = 20 Hz to 20 kHz,
See Figure 24
25°C
3.3 V
0.004
%
Supply
Positive supply
current
(1)
I+
VI = VIO or GND
25°C
Full
3.6 V
10
50
300
nA
The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum
Submit Documentation Feedback
Copyright © 2006–2009, Texas Instruments Incorporated
Product Folder Link(s): TS5A26542
7
TS5A26542
SCDS232E – JUNE 2006 – REVISED DECEMBER 2009
www.ti.com
ELECTRICAL CHARACTERISTICS FOR 2.5-V SUPPLY (1)
V+ = 2.25 V to 2.75 V, VIO = 1.65 V to 1.95 V, TA = –40°C to 85°C (unless otherwise noted)
PARAMETER
SYMBOL
TEST CONDITIONS
TA
V+
MIN
TYP
MAX
UNIT
Analog Switch
Analog signal range
VCOM,
VNO
ON-state resistance
ron
VNO or VNC = 1.8 V,
ICOM = –100 mA,
Switch ON,
See Figure 14
ON-state resistance
match between
channels
Δron
VNO or VNC = 1.8 V,
0.8 V,
ICOM = –100 mA,
Switch ON,
See Figure 14
0 ≤ (VNO or VNC) ≤ V+,
ICOM = –100 mA,
Switch ON,
See Figure 14
ON-state resistance
flatness
NO, NC
OFF leakage current
NC, NO
ON leakage current
COM
ON leakage current
ron(flat)
INO(OFF),
INC (OFF)
INO(ON)
ICOM(ON)
0
25°C
Full
25°C
VNO = 0.5 V, 2.2 V,
VCOM = 2.2 V, 0.5 V,
VNC = Open,
or
VNC = 0.5 V, 2.2 V,
VCOM = 2.2 V, 0.5 V,
VNO = Open,
25°C
VNO = 0.5 V, 2.2 V,
VNC and VCOM = Open,
or
VNC = 0.5 V, 2.2 V,
VNO and VCOM = Open,
Switch ON,
See Figure 16
VCOM = 0.5 V,
VNO and VNC = Open,
or
VCOM = 2.2 V,
VNO and VNC = Open,
Switch ON,
See Figure 16
0.15
2.25 V
2.25 V
0.25
Ω
0.5
Ω
0.6
–20
2.75 V
2.75 V
–50
20
50
2
–20
–10
2.75 V
2
–50
–10
25°C
Full
Ω
0.5
25°C
Full
V
0.2
0.2
Full
Full
1.3
1.6
25°C
VNO or VNC = 0.8 V, 1 V,
Switch ON,
1.8 V,
See Figure 14
ICOM = –100 mA,
Switch OFF,
See Figure 15
1
2.25 V
25°C
Full
V+
10
20
2
nA
nA
10
50
nA
Digital Control Inputs (IN1, IN2) (2)
Input logic high
VIH
VIO = 1.65 V to 1.95 V
Full
0.65 × VIO
VIO
V
Input logic low
VIL
VIO = 1.65 V to 1.95 V
Full
0
0.35 × VIO
V
Input leakage current
(1)
(2)
8
IIH, IIL
VI = VIO or 0
25°C
Full
2.75 V
–2
2
–20
20
nA
The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum
All unused digital inputs of the device must be held at VIO or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
Submit Documentation Feedback
Copyright © 2006–2009, Texas Instruments Incorporated
Product Folder Link(s): TS5A26542
TS5A26542
www.ti.com
SCDS232E – JUNE 2006 – REVISED DECEMBER 2009
ELECTRICAL CHARACTERISTICS FOR 2.5-V SUPPLY (1) (continued)
V+ = 2.25 V to 2.75 V, VIO = 1.65 V to 1.95 V, TA = –40°C to 85°C (unless otherwise noted)
PARAMETER
SYMBOL
TEST CONDITIONS
TA
V+
MIN
TYP MAX
UNIT
Dynamic
Turn-on time
tON
VCOM = V+,
RL = 50 Ω,
CL= 35 pF,
See Figure 18
25°C
2.5 V
5
Full
2.25 V
5
Turn-off time
tOFF
VCOM = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 18
25°C
2.5 V
2
Full
2.25 V
2
Break-before-make
time
tBBM
VNC = VNO = V+/2,
RL = 50 Ω,
CL = 35 pF,
See Figure 19
25°C
2.5 V
1
Full
2.25 V
1
Charge injection
QC
VGEN = 0,
RGEN = 0,
CL = 1 nF,
See Figure 23
25°C
2.5 V
5
pC
NO
OFF capacitance
CNO(OFF)
VNO = V+ or GND,
Switch OFF,
See Figure 17
25°C
2.5 V
38
pF
NC, NO
ON capacitance
CNC(ON),
CNO(ON)
VNC or VNO = V+ or
GND,
Switch ON,
See Figure 17
25°C
2.5 V
135
pF
COM
ON capacitance
CCOM(ON)
VCOM = V+ or GND,
Switch ON,
See Figure 17
25°C
2.5 V
135
pF
VI = VIO or GND,
See Figure 17
25°C
2.5 V
6.5
pF
Digital input
capacitance
CI
20
35
40
10
20
25
11
20
25
ns
ns
ns
Bandwidth
BW
RL = 50 Ω,
Switch ON,
See Figure 20
25°C
2.5 V
40
MHz
OFF isolation
OISO
RL = 50 Ω,
f = 1 MHz,
See Figure 21
25°C
2.5 V
–63
dB
Crosstalk
XTALK
RL = 50 Ω,
f = 1 MHz,
See Figure 22
25°C
2.5 V
–63
dB
Total harmonic
distortion
THD
RL = 600 Ω,
CL = 50 pF,
f = 20 Hz to 20 kHz,
See Figure 24
25°C
2.5 V
0.008
%
Supply
Positive supply
current
(1)
I+
VI = VIO or GND
25°C
Full
2.75 V
10
25
100
nA
The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum
Submit Documentation Feedback
Copyright © 2006–2009, Texas Instruments Incorporated
Product Folder Link(s): TS5A26542
9
TS5A26542
SCDS232E – JUNE 2006 – REVISED DECEMBER 2009
www.ti.com
TYPICAL PERFORMANCE
1.6
1.0
1.4
0.8
1.2
0.6
rON (Ω)
rON (Ω)
1.0
0.8
0.4
0.6
0.4
0.2
0.2
0.0
0.0
0.5
1.0
1.5
2.0
0.0
0.0
2.5
0.5
1.0
1.5
2.0
2.5
3.0
VCOM (V)
VCOM (V)
Figure 1. ron vs VCOM (V+ = 2.5 V)
Figure 2. ron vs VCOM (V+ = 3.3 V)
60
1.0
50
0.8
Leakage (nA)
rON (Ω)
COM (ON)
40
0.6
0.4
30
20
0.2
0.0
0.0
10
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
NC (OFF)
0
−60
5.0
−40
−20
0
VCOM (V)
60
80
100
Figure 4. Leakage Current vs Temperature (V+ = 5 V)
60
20
10
50
0
−10
40
QC (pC)
Positive Supply Current − I+ (nA)
40
TA (5C)
Figure 3. ron vs VCOM (V+ = 5 V)
30
20
−20
V+ = 2.5 V
−30
−40
−50
−60
10
V+ = 5 V
−70
0
−60
V+ = 3.3 V
−80
−40
−20
0
20
40
60
80
100
0
TA (°C)
1
2
3
4
5
6
VCOM (V)
Figure 5. I+ vs Temperature (V+ = 5 V)
10
20
Figure 6. Charge Injection (QC) vs VCOM
Submit Documentation Feedback
Copyright © 2006–2009, Texas Instruments Incorporated
Product Folder Link(s): TS5A26542
TS5A26542
www.ti.com
SCDS232E – JUNE 2006 – REVISED DECEMBER 2009
16
20
14
tON/tOFF (ns)
tON/tOFF (ns)
TYPICAL PERFORMANCE (continued)
25
tON
15
10
tOFF
tON
12
tOFF
10
8
5
0
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6
−60
−40
−20
0
20
40
60
80
100
TA – Temperature 5C
V+ (V)
Figure 7. tON/tOFF vs Supply Voltage
Figure 8. tON/tOFF vs Temperature (V+ = 5 V)
0
0
−10
−20
Attenuation (dB)
Gain (dB)
−5
−10
−15
−30
−40
−50
−60
−70
−20
−80
−25
0.01
1
10
100
−90
0.01
1000
Frequency (MHz)
1
10
100
1000
Frequency (MHz)
Figure 9. Gain vs Frequency (V+ = 5 V)
Figure 10. Crosstalk vs Frequency (V+ = 5 V)
0
0.006
−10
−20
THD (%)
Attenuation (dB)
0.005
−30
−40
−50
0.004
−60
−70
0.003
−80
−90
−100
10
1k
10k
100k
1M
0.002
10
Frequency (Hz)
1k
10k
100k
1M
Frequency (MHz)
Figure 11. OFF Isolation vs Frequency (V+ = 5 V)
Figure 12. Total Harmonic Distortion vs Frequency
(V+ = 2.5 V)
Submit Documentation Feedback
Copyright © 2006–2009, Texas Instruments Incorporated
Product Folder Link(s): TS5A26542
11
TS5A26542
SCDS232E – JUNE 2006 – REVISED DECEMBER 2009
www.ti.com
TYPICAL PERFORMANCE (continued)
6
VIO = 1.65 V, V+ = 5.5 V
5
VIO = 1.95 V, V+ = 5.5 V
VOUT (V)
4
VIO = 1.65 V, V+ = 3.6 V
3
VIO = 1.95 V, V+ = 3.6 V
VIO = 1.65 V, V+ = 2.25 V
2
VIO = 1.95 V, V+ = 2.25 V
1
0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
VIN (V)
Figure 13. VIO Thresholds
12
Submit Documentation Feedback
Copyright © 2006–2009, Texas Instruments Incorporated
Product Folder Link(s): TS5A26542
TS5A26542
www.ti.com
SCDS232E – JUNE 2006 – REVISED DECEMBER 2009
PARAMETER MEASUREMENT INFORMATION
V+
VNO NO
COM
+
VCOM
Channel ON
r on +
VI
ICOM
IN
VCOM * VNO
W
I COM
VI = VIH or VIL
+
GND
Figure 14. ON-State Resistance (ron)
V+
VNO NO
COM
+
VCOM
+
VI
OFF-State Leakage Current
Channel OFF
VI = VIH or VIL
IN
+
GND
Figure 15. OFF-State Leakage Current (ICOM(OFF), INC(OFF), ICOM(PWROFF), INC(PWR(FF))
V+
VNO NO
COM
+
VI
VCOM
ON-State Leakage Current
Channel ON
VI = VIH or VIL
IN
+
GND
Figure 16. ON-State Leakage Current (ICOM(ON), INC(ON))
Submit Documentation Feedback
Copyright © 2006–2009, Texas Instruments Incorporated
Product Folder Link(s): TS5A26542
13
TS5A26542
SCDS232E – JUNE 2006 – REVISED DECEMBER 2009
www.ti.com
PARAMETER MEASUREMENT INFORMATION (continued)
V+
VNO
NO
Capacitance
Meter
VBIAS = V+, VIO, or GND and
VI = VIO or GND
COM
COM
VI
IN
Capacitance is measured at NO,
COM, and IN inputs during ON
and OFF conditions.
VBIAS
GND
Figure 17. Capacitance (CI, CCOM(OFF), CCOM(ON), CNC(OFF), CNC(ON))
V+
NO
VCOM
VI
Logic
Input(1)
VNO
TEST
RL
CL
tON
50 Ω
35 pF
V+
tOFF
50 Ω
35 pF
V+
VCOM
COM
CL(2)
IN
GND
RL
VIO
Logic
Input
(VI)
50%
50%
0
tON
Switch
Output
(VNO)
tOFF
90%
90%
NOTES: A. All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω, tr < 5 ns, tf < 5 ns.
B. CL includes probe and jig capacitance.
Figure 18. Turn-On (tON) and Turn-Off Time (tOFF)
14
Submit Documentation Feedback
Copyright © 2006–2009, Texas Instruments Incorporated
Product Folder Link(s): TS5A26542
TS5A26542
www.ti.com
SCDS232E – JUNE 2006 – REVISED DECEMBER 2009
PARAMETER MEASUREMENT INFORMATION (continued)
V+
Logic
Input
(VI)
VNC or VNO
NC or NO
VCOM
VIO
50%
0
COM
NC or NO
CL(2)
VI
Switch
Output
(VCOM)
RL
IN
90%
90%
tBBM
Logic
Input(1)
VNC or VNO = V+/2
RL = 50 Ω
CL = 35 pF
GND
NOTES: A. All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω, tr < 5 ns, tf < 5 ns.
B. CL includes probe and jig capacitance.
Figure 19. Break-Before-Make Time (tBBM)
V+
Network Analyzer
50 W
VNO
NO
Channel ON: NO to COM
COM
VCOM
VI = VIH or VIL
Source
Signal
Network Analyzer Setup
50 W
VI
+
IN
Source Power = 0 dBm
(632-mV P-P at 50-W load)
GND
DC Bias = 350 mV
Figure 20. Bandwidth (BW)
Submit Documentation Feedback
Copyright © 2006–2009, Texas Instruments Incorporated
Product Folder Link(s): TS5A26542
15
TS5A26542
SCDS232E – JUNE 2006 – REVISED DECEMBER 2009
www.ti.com
PARAMETER MEASUREMENT INFORMATION (continued)
V+
Network Analyzer
Channel OFF: NO to COM
50 W
VNO NO
VI = VIO or GND
COM
Source
Signal
VCOM
50 W
Network Analyzer Setup
VI
50 W
Source Power = 0 dBm
(632-mV P-P at 50-W load)
IN
+
GND
DC Bias = 350 mV
Figure 21. OFF Isolation (OISO)
V+
Network Analyzer
50 W
VNO1
Source
Signal
VNO2
NO1
NO2
COM2
50 W
VI
Channel ON: NO to COM
COM1
50 W
Network Analyzer Setup
Source Power = 0 dBm
(632 mV P-P at 50 W load)
IN
+
GND
DC Bias = 350 mV
Figure 22. Crosstalk (XTALK)
16
Submit Documentation Feedback
Copyright © 2006–2009, Texas Instruments Incorporated
Product Folder Link(s): TS5A26542
TS5A26542
www.ti.com
SCDS232E – JUNE 2006 – REVISED DECEMBER 2009
PARAMETER MEASUREMENT INFORMATION (continued)
V+
RGEN
VGEN
Logic
Input
(VI)
VIH
OFF
ON
OFF V
IL
NO
COM
+
VCOM
∆VCOM
VCOM
CL(1)
VI
VGEN = 0 to V+
IN
Logic
Input(2)
RGEN = 0
CL = 1 nF
QC = CL × ∆VCOM
VI = VIH or VIL
GND
NOTES: A. CL includes probe and jig capacitance.
B. All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω, tr < 5 ns, tf < 5 ns.
Figure 23. Charge Injection (QC)
Channel ON: COM to NO
VSOURCE = V+ P-P
VI = (VIO – V+/2) or −V+/2
RL = 600 Ω
fSOURCE = 20 Hz to 20 kHz
CL = 50 pF
V+/2
Audio Analyzer
NO
Source
Signal
COM
CL(1)
600 W
VI
IN
600 W
−V+/2
NOTES: A. CL includes probe and jig capacitance.
Figure 24. Total Harmonic Distortion (THD)
Submit Documentation Feedback
Copyright © 2006–2009, Texas Instruments Incorporated
Product Folder Link(s): TS5A26542
17
PACKAGE OPTION ADDENDUM
www.ti.com
6-Jan-2010
PACKAGING INFORMATION
Orderable Device
Status (1)
Package
Type
Package
Drawing
TS5A26542YZTR
ACTIVE
DSBGA
YZT
Pins Package Eco Plan (2)
Qty
12
3000 Green (RoHS &
no Sb/Br)
Lead/Ball Finish
SNAGCU
MSL Peak Temp (3)
Level-1-260C-UNLIM
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
20-Jul-2010
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
TS5A26542YZTR
Package Package Pins
Type Drawing
SPQ
DSBGA
3000
YZT
12
Reel
Reel
A0
Diameter Width (mm)
(mm) W1 (mm)
178.0
9.2
Pack Materials-Page 1
1.49
B0
(mm)
K0
(mm)
P1
(mm)
1.99
0.75
4.0
W
Pin1
(mm) Quadrant
8.0
Q2
PACKAGE MATERIALS INFORMATION
www.ti.com
20-Jul-2010
*All dimensions are nominal
Device
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
TS5A26542YZTR
DSBGA
YZT
12
3000
220.0
220.0
35.0
Pack Materials-Page 2
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Applications
Amplifiers
amplifier.ti.com
Audio
www.ti.com/audio
Data Converters
dataconverter.ti.com
Automotive
www.ti.com/automotive
DLP® Products
www.dlp.com
Communications and
Telecom
www.ti.com/communications
DSP
dsp.ti.com
Computers and
Peripherals
www.ti.com/computers
Clocks and Timers
www.ti.com/clocks
Consumer Electronics
www.ti.com/consumer-apps
Interface
interface.ti.com
Energy
www.ti.com/energy
Logic
logic.ti.com
Industrial
www.ti.com/industrial
Power Mgmt
power.ti.com
Medical
www.ti.com/medical
Microcontrollers
microcontroller.ti.com
Security
www.ti.com/security
RFID
www.ti-rfid.com
Space, Avionics &
Defense
www.ti.com/space-avionics-defense
RF/IF and ZigBee® Solutions www.ti.com/lprf
Video and Imaging
www.ti.com/video
Wireless
www.ti.com/wireless-apps
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2010, Texas Instruments Incorporated