TI TS5A3154DCURG4

TS5A3154
www.ti.com........................................................................................................................................................... SCDS191B – MARCH 2005 – REVISED MAY 2009
5-V/3.3-V SINGLE-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER
FEATURES
APPLICATIONS
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
1
2
•
Specified Make-Before-Break Switching
Low ON-State Resistance (0.9 Ω)
Control Inputs Are 5.5-V Tolerant
Low Charge Injection
Excellent ON-State Resistance Matching
Low Total Harmonic Distortion (THD)
1.65-V to 5.5-V Single-Supply Operation
Latch-Up Performance Exceeds 100 mA Per
JESD 78, Class II
ESD Performance Tested Per JESD 22
– 2000-V Human-Body Model
(A114-B, Class II)
– 1000-V Charged-Device Model (C101)
Cell Phones
PDAs
Portable Instrumentation
Audio and Video Signal Routing
Low-Voltage Data-Acquisition Systems
Communication Circuits
Modems
Hard Drives
Computer Peripherals
Wireless Terminals and Peripherals
DCU PACKAGE
(TOP VIEW)
YZP PACKAGE
(BOTTOM VIEW)
COM 1
8
V+
GND
D1 4
EN 2
7
NC
GND
GND 3
6
NO
GND 4
Logic
Control
5
IN
Logic
Control
5 D2
IN
C1 3
6 C2
NO
EN
B1 2
7 B2
NC
COM
A1 1
8 A2
V+
DESCRIPTION/ORDERING INFORMATION
The TS5A3154 is a single-pole double-throw (SPDT) analog switch that is designed to operate from 1.65 V to
5.5 V. The device offers a low ON-state resistance and an excellent channel-to-channel ON-state resistance
matching. The device has excellent total harmonic distortion (THD) performance and consumes very low power.
These features make this device suitable for portable audio applications.
ORDERING INFORMATION
TA
–40°C to 85°C
(1)
(2)
(3)
PACKAGE
(1) (2)
ORDERABLE PART NUMBER
TOP-SIDE MARKING (3)
NanoFree™ – WCSP (DSBGA)
0.23-mm Large Bump – YZP
(Pb-free)
Reel of 3000
TS5A3157YZPR
_ _ _JX_
SSOP – DCU
Reel of 3000
TS5A3157DCUR
JCF_
Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.
For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
website at www.ti.com.
DCU: The actual top-side marking has one additional character that designates the assembly/test site.
YZP: The actual top-side marking has three preceding characters to denote year, month, and sequence code, and one following
character to designate the assembly/test site. Pin 1 identifier indicates solder-bump composition (1 = SnPb, • = Pb-free).
1
2
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
NanoFree is a trademark of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2005–2009, Texas Instruments Incorporated
TS5A3154
SCDS191B – MARCH 2005 – REVISED MAY 2009........................................................................................................................................................... www.ti.com
FUNCTION TABLE
EN
IN
NC TO COM,
COM TO NC
NO TO COM,
COM TO NO
L
L
ON
OFF
L
H
OFF
ON
H
X
OFF
OFF
Summary of Characteristics (1)
Single-Pole, Double-Throw
2:1 Multiplexer/Demultiplexer (SPDT)
Configuration
Number of channels
1
ON-state resistance (ron)
0.9 Ω
ON-state resistance match (Δron)
0.1 Ω
0.15 Ω
ON-state resistance flatness (ron(flat))
Turn-on/turn-off time (tON/tOFF)
8 ns/12.5 ns
Make-before-break time (tMBB)
12 ns
Charge injection (QC)
10 pC
Bandwidth (BW)
OFF isolation (OISO)
–64 dB at 1 MHz
Crosstalk (XTALK)
–64 dB at 1 MHz
Total harmonic distortion (THD)
0.004%
Leakage current (ICOM(OFF)/INC(OFF))
±20 nA
Power-supply current (I+)
0.1 µA
Package option
(1)
2
100 MHz
8-pin SSOP or DSBGA
V+ = 5 V, TA = 25°C
Submit Documentation Feedback
Copyright © 2005–2009, Texas Instruments Incorporated
Product Folder Link(s): TS5A3154
TS5A3154
www.ti.com........................................................................................................................................................... SCDS191B – MARCH 2005 – REVISED MAY 2009
Absolute Minimum and Maximum Ratings (1) (2)
over operating free-air temperature range (unless otherwise noted)
MIN
MAX
V+
Supply voltage range (3)
–0.5
6.5
V
VNC,
VNO,
VCOM
Analog voltage range (3) (4) (5)
–0.5
V+ + 0.5
V
IK
Analog port diode current
–50
50
INC,
ICOM,
INO
On-state switch current
–200
200
–400
400
VI
Digital input voltage range (3) (4)
–0.5
6.5
IIK
Digital input clamp current
I+
Continuous current through V+
IGND
Continuous current through GND
θJA
Package thermal impedance (7)
Tstg
Storage temperature range
(1)
(2)
(3)
(4)
(5)
(6)
(7)
On-state peak switch current (6)
VNC, VNO, VCOM < 0 or VNO, VNC, VCOM > V+
VNC, VNO, VCOM = 0 to V+
VI < 0
–50
–100
mA
mA
V
mA
100
mA
100
mA
DCU package
227
YZP package
102
–65
UNIT
150
°C/W
°C
Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may
degrade device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond
those specified is not implied.
The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum
All voltages are with respect to ground, unless otherwise specified.
The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed.
This value is limited to 5.5 V maximum.
Pulse at 1-ms duration < 10% duty cycle.
The package thermal impedance is calculated in accordance with JESD 51-7.
Submit Documentation Feedback
Copyright © 2005–2009, Texas Instruments Incorporated
Product Folder Link(s): TS5A3154
3
TS5A3154
SCDS191B – MARCH 2005 – REVISED MAY 2009........................................................................................................................................................... www.ti.com
Electrical Characteristics for 5-V Supply (1)
V+ = 4.5 V to 5.5 V, TA = –40°C to 85°C (unless otherwise noted)
PARAMETER
SYMBOL
TEST CONDITIONS
TA
V+
MIN
TYP MAX
0
V+
UNIT
Analog Switch
Analog signal
range
VCOM, VNO,
VNC
Peak ON
resistance
rpeak
ON-state
resistance
ron
ON-state
resistance
matching
between
channels
ON-state
resistance
flatness
NC, NO
OFF leakage
current
COM
OFF leakage
current
Δron
ron(flat)
25°C
VNO or VNC = 2.5 V,
ICOM = –100 mA,
Switch ON,
See Figure 13
25°C
VNO or VNC = 2.5 V,
ICOM = –100 mA,
Switch ON,
See Figure 13
0 ≤ (VNO or VNC) ≤ V+,
ICOM = –100 mA,
Switch ON,
See Figure 13
VNO or VNC = 1 V, 1.5 V,
2.5 V,
ICOM = –100 mA,
Switch ON,
See Figure 13
VNC or VNO = 1 V,
VCOM = 4.5 V,
or
VNC or VNO = 4.5 V,
VCOM = 1 V,
Switch OFF,
See Figure 14
VNC or VNO = 0 to 5.5 V,
VCOM = 5.5 V to 0,
Switch OFF,
See Figure 14
INC(ON),
INO(ON)
VNC or VNO = 1 V,
VCOM = Open,
or
VNC or VNO = 4.5 V,
VCOM = Open,
Switch ON,
See Figure 15
ICOM(OFF)
VCOM = 1 V, VNC or
VNO = 4.5 V,
or
VCOM = 4.5 V,
VNC or VNO = 1 V,
Switch OFF,
See Figure 14
VNC or VNO = 0 to 5.5 V,
VCOM = 5.5 V to 0,
Switch OFF,
See Figure 14
VCOM = 1 V,
VNC or VNO = Open,
or
VCOM = 4.5 V,
VNC or VNO = Open,
Switch ON,
See Figure 15
INC(OFF),
INO(OFF)
ICOM(PWROFF)
COM
ON leakage
current
Switch ON,
See Figure 13
Full
Full
0.9
4.5 V
ICOM(ON)
Full
1.1
1.3
0.8
4.5 V
0.9
1.1
25°C
INC(PWROFF),
INO(PWROFF)
NC, NO
ON leakage
current
0 ≤ (VNO or VNC) ≤ V+,
ICOM = –100 mA,
0.05
4.5 V
Ω
Ω
0.1
0.1
25°C
V
Ω
0.15
Full
25°C
4.5 V
0.09
Full
25°C
Full
–20
5.5 V
0V
25°C
Full
5.5 V
25°C
Full
0V
25°C
Full
–5
5
25
2
2
–25
5
25
2
µA
nA
20
150
0.7
nA
20
150
–150
–20
5.5 V
0.7
–150
–5
20
150
–25
–20
5.5 V
2
–150
–20
25°C
Full
Ω
0.15
25°C
Full
0.15
nA
µA
20
–150
150
nA
Digital Control Inputs (IN, EN) (2)
Input logic high
VIH
Full
2.4
5.5
V
Input logic low
VIL
Full
0
0.8
V
25°C
–100
Input leakage
current
(1)
(2)
4
IIH, IIL
VI = 5.5 V or 0 V
Full
5.5 V
–100
25
100
100
nA
The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum.
All unused digital inputs of the device must be held at V+ or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
Submit Documentation Feedback
Copyright © 2005–2009, Texas Instruments Incorporated
Product Folder Link(s): TS5A3154
TS5A3154
www.ti.com........................................................................................................................................................... SCDS191B – MARCH 2005 – REVISED MAY 2009
Electrical Characteristics for 5-V Supply (continued)
V+ = 4.5 V to 5.5 V, TA = –40°C to 85°C (unless otherwise noted)
PARAMETER
SYMBOL
TEST CONDITIONS
TA
V+
MIN
25°C
5V
1
Full
4.5 V to
5.5 V
1
25°C
5V
5
Full
4.5 V to
5.5 V
4
25°C
5V
4
Full
4.5 V to
5.5 V
4
TYP MAX
UNIT
Dynamic
5.2
8
Turn-on time,
IN or OE
tON
VCOM = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 17
Turn-off time,
IN or OE
tOFF
VCOM = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 17
Make-beforebreak time
tMBB
VCOM = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 18
Charge injection
QC
VGEN = 0,
RGEN = 0,
CL = 1 nF,
See Figure 22
25°C
5V
10
pC
9
9.5
12.5
13.5
6.3
ns
ns
12
13
ns
NC, NO
OFF
capacitance
CNC(OFF),
CNO(OFF)
VNC or VNO = V+ or GND,
Switch OFF,
See Figure 16
25°C
5V
19
pF
NC, NO
ON
capacitance
CNC(ON),
CNO(ON)
VNC or VNO = V+ or GND,
Switch ON,
See Figure 16
25°C
5V
57
pF
COM OFF
capacitance
CCOM(OFF)
VCOM = V+ or GND,
Switch ON,
See Figure 16
25°C
5V
36
pF
COM ON
capacitance
CCOM(ON)
VCOM = V+ or GND,
Switch ON,
See Figure 16
25°C
5V
57
pF
Digital input
capacitance
CI
VI = V+ or GND,
See Figure 16
25°C
5V
2
pF
Bandwidth
BW
RL = 50 Ω,
Switch ON,
See Figure 19
25°C
5V
100
MHz
OFF isolation
OISO
RL = 50 Ω,
f = 1 MHz,
Switch OFF,
See Figure 20
25°C
5V
–64
dB
Crosstalk
XTALK
RL = 50 Ω,
f = 1 MHz,
Switch ON,
See Figure 21
25°C
5V
–64
dB
Total harmonic
distortion
THD
RL = 600 Ω,
CL = 50 pF,
f = 20 Hz to 20 kHz,
See Figure 23
25°C
5V
0.004
%
VI = V+ or GND,
Switch ON or OFF
Supply
Positive supply
current
I+
25°C
Full
5.5 V
0.02
0.1
0.5
Submit Documentation Feedback
Copyright © 2005–2009, Texas Instruments Incorporated
Product Folder Link(s): TS5A3154
µA
5
TS5A3154
SCDS191B – MARCH 2005 – REVISED MAY 2009........................................................................................................................................................... www.ti.com
Electrical Characteristics for 3.3-V Supply (1)
V+ = 3 V to 3.6 V, TA = –40°C to 85°C (unless otherwise noted)
PARAMETER
SYMBOL
TEST CONDITIONS
TA
V+
MIN
TYP MAX
0
V+
UNIT
Analog
Switch
Analog signal
range
VCOM, VNO,
VNC
Peak ON
resistance
rpeak
ON-state
resistance
ron
ON-state
resistance
match
between
channels
ON-state
resistance
flatness
NC, NO
OFF leakage
current
NC, NO
ON leakage
current
COM
OFF leakage
current
COM
ON leakage
current
0 ≤ (VNO or VNC) ≤ V+,
ICOM = –100 mA,
Switch ON,
See Figure 13
25°C
VNO or VNC = 2 V,
ICOM = –100 mA,
Switch ON,
See Figure 13
25°C
Full
Full
1.3
3V
1.9
1.2
3V
VNO or VNC = 2 V, 0.8 V
ICOM = –100 mA,
Switch ON,
See Figure 13
0 ≤ (VNO or VNC) ≤ V+,
ICOM = –100 mA,
Switch ON,
See Figure 13
25°C
VNO or VNC = 2 V, 0.8 V,
ICOM = –100 mA,
Switch ON,
See Figure 13
25°C
ron(flat)
INC(OFF),
INO(OFF)
INC(PWROFF),
INO(PWROFF)
INC(ON),
INO(ON)
ICOM(OFF)
ICOM(PWROFF)
ICOM(ON)
VNC or VNO = 1 V, VCOM = 3 V,
or
VNC or VNO = 3 V, VCOM = 1 V,
Switch OFF,
See Figure 14
VNC or VNO = 0 to 3.6 V,
VCOM = 3.6 V to 0 V,
Switch OFF,
See Figure 14
VNC or VNO = 1 V, VCOM = Open,
or
VNC or VNO = 3 V, VCOM = Open,
Switch ON,
See Figure 15
VCOM = 1 V, VNC or VNO = 3 V,
or
VCOM = 3 V, VNC or VNO = 1 V,
Switch OFF,
See Figure 14
VNC or VNO = 0 to 3.6 V,
VCOM = 3.6 V to 0,
Switch OFF,
See Figure 14
VCOM = 1 V, VNC or VNO = Open,
or
VCOM = 3 V, VNC or VNO = Open
Switch ON,
See Figure 15
Full
Full
0.08
3V
Full
3V
0.09
3.6 V
0V
25°C
Full
0V
25°C
Full
0.15
Ω
–1
1
15
2
2
0.2
1
15
2
µA
nA
20
50
–15
nA
20
50
–50
–20
3.6 V
0.2
–50
–1
20
50
–15
–20
3.6 V
2
–50
–20
3.6 V
25°C
Full
Ω
0.15
–20
25°C
Full
Ω
0.15
0.15
Full
25°C
Ω
0.3
25°C
Full
1.5
1.7
25°C
Δron
1.6
V
nA
µA
20
–50
50
nA
Digital Control Inputs (IN, EN) (2)
Input logic high
VIH
Full
2
5.5
V
Input logic low
VIL
Full
0
0.8
V
25°C
–100
Input leakage
current
(1)
(2)
6
IIH, IIL
VI = 5.5 V or 0
Full
3.6 V
–100
25
100
100
nA
The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum.
All unused digital inputs of the device must be held at V+ or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
Submit Documentation Feedback
Copyright © 2005–2009, Texas Instruments Incorporated
Product Folder Link(s): TS5A3154
TS5A3154
www.ti.com........................................................................................................................................................... SCDS191B – MARCH 2005 – REVISED MAY 2009
Electrical Characteristics for 3.3-V Supply (continued)
V+ = 3 V to 3.6 V, TA = –40°C to 85°C (unless otherwise noted)
PARAMETER
SYMBOL
TEST CONDITIONS
TA
V+
MIN
25°C
3.3 V
3
Full
3 V to
3.6 V
2
25°C
3.3 V
5
Full
3 V to
3.6 V
4
25°C
3.3 V
4
Full
3 V to
3.6 V
4
TYP MAX
UNIT
Dynamic
6
10
Turn-on time,
IN or OE
tON
VCOM = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 17
Turn-off time,
IN or OE
tOFF
VCOM = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 17
Make-beforebreak time
tMBB
VCOM = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 18
VGEN = 0,
RGEN = 0,
CL = 1 nF,
See Figure 22
25°C
3.3 V
9
pC
Charge
injection
QC
10.5
10
15
17
5.7
ns
ns
12
13
ns
NC, NO
OFF
capacitance
CNC(OFF),
CNO(OFF)
VNC or VNO = V+ or GND,
Switch OFF,
See Figure 16
25°C
3.3 V
19
pF
NC, NO
ON
capacitance
CNC(ON),
CNO(ON)
VNC or VNO = V+ or GND,
Switch ON,
See Figure 16
25°C
3.3 V
57
pF
COM OFF
capacitance
CCOM(OFF)
VCOM = V+ or GND,
Switch ON,
See
25°C
3.3 V
36
pF
COM
ON
capacitance
CCOM(ON)
VCOM = V+ or GND,
Switch ON,
See Figure 16
25°C
3.3 V
57
pF
Digital input
capacitance
CI
VI = V+ or GND,
See Figure 16
25°C
3.3 V
2
pF
Bandwidth
BW
RL = 50 Ω,
Switch ON,
See Figure 19
25°C
3.3 V
100
MHz
OFF isolation
OISO
RL = 50 Ω,
f = 1 MHz,
Switch OFF,
See Figure 20
25°C
3.3 V
–64
dB
Crosstalk
XTALK
RL = 50 Ω,
f = 1 MHz,
Switch ON,
See Figure 21
25°C
3.3 V
–64
dB
Total harmonic
distortion
THD
RL = 600 Ω,
CL = 50 pF,
f = 20 Hz to 20
kHz,
See Figure 23
25°C
3.3 V
0.01
0
%
VI = V+ or GND,
Switch ON or
OFF
Supply
Positive supply
current
I+
25°C
Full
3.6 V
0.01
0.1
0.25
Submit Documentation Feedback
Copyright © 2005–2009, Texas Instruments Incorporated
Product Folder Link(s): TS5A3154
µA
7
TS5A3154
SCDS191B – MARCH 2005 – REVISED MAY 2009........................................................................................................................................................... www.ti.com
Electrical Characteristics for 2.5-V Supply (1)
V+ = 3 V to 3.6 V, TA = –40°C to 85°C (unless otherwise noted)
PARAMETER
SYMBOL
TEST CONDITIONS
TA
V+
MIN
TYP MAX
0
V+
UNIT
Analog Switch
Analog signal
range
VCOM, VNO,
VNC
Peak ON
resistance
rpeak
ON-state
resistance
ron
ON-state
resistance
matching
between
channels
ON-state
resistance
flatness
NC, NO
OFF leakage
current
COM
OFF leakage
current
Δron
25°C
VNO or VNC = 1.8 V,
ICOM = –8 mA,
Switch ON,
See Figure 13
25°C
Full
Full
VNO or VNC = 1.8 V,
ICOM = –8 mA,
Switch ON,
See Figure 13
0 ≤ (VNO or VNC) ≤ V+,
ICOM = –8 mA,
Switch ON,
See Figure 13
25°C
VNO or VNC = 0.8 V, 1.8 V,
ICOM = –8 mA,
Switch ON,
See Figure 13
25°C
VNC or VNO = 0.5 V,
VCOM = 2.3 V,
or
VNC or VNO = 2.3 V,
VCOM = 0.5 V,
Switch OFF,
See Figure 14
VNC or VNO = 0 to 2.7 V,
VCOM = 2.7 V to 0,
Switch OFF,
See Figure 14
VNC or VNO = 0.5 V,
VCOM = Open,
or
VNC or VNO = 2.3 V,
VCOM = Open,
Switch ON,
See Figure 15
VCOM = 0.5 V, VNC or
VNO = 2.3 V,
or
VCOM = 2.3 V, VNC or
VNO = 0.5V,
Switch OFF,
See Figure 14
VNC or VNO = 0 to 2.7 V,
VCOM = 2.7 V to 0,
Switch OFF,
See Figure 14
VCOM = 0.5 V, VNC or
VNO = Open,
or
VCOM = 2.3 V, VNC or
VNO = Open,
Switch ON,
See Figure 15
ron(flat)
INC(OFF),
INO(OFF)
INC(ON),
INO(ON)
ICOM(OFF)
ICOM(PWROFF)
COM
ON leakage
current
Switch ON,
See Figure 13
1.9
2.3 V
ICOM(ON)
Full
Full
1.6
2.3 V
0.12
2.3 V
Full
25°C
Full
0.5
–20
2.7 V
0V
2.7 V
2.7 V
0V
25°C
Full
Ω
1
Ω
1
25°C
Full
Ω
0.2
0.2
2.3 V
25°C
Full
Ω
0.65
25°C
25°C
2.1
2.5
Full
Full
2.5
2.7
25°C
INC(PWROFF),
INO(PWROFF)
NC, NO
ON leakage
current
0 ≤ (VNO or VNC) ≤ V+,
ICOM = –8 mA,
V
2.7 V
2
–50
20
50
–1
1
–10
10
–20
20
–50
50
–20
20
–50
50
nA
µA
nA
nA
–1
1
–10
10
–20
20
–50
50
1.8
5.5
V
0.6
V
µA
nA
Digital Control Inputs (IN, EN) (2)
Input logic high
VIH
Input logic low
VIL
Input leakage
current
(1)
(2)
8
IIH, IIL
Full
VI = 5.5 V or 0
Full
0
25°C
–100
Full
2.7 V
–100
25
100
100
nA
The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum.
All unused digital inputs of the device must be held at V+ or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
Submit Documentation Feedback
Copyright © 2005–2009, Texas Instruments Incorporated
Product Folder Link(s): TS5A3154
TS5A3154
www.ti.com........................................................................................................................................................... SCDS191B – MARCH 2005 – REVISED MAY 2009
Electrical Characteristics for 2.5-V Supply (continued)
V+ = 3 V to 3.6 V, TA = –40°C to 85°C (unless otherwise noted)
PARAMETER
SYMBOL
TEST CONDITIONS
TA
V+
MIN
25°C
2.5 V
Full
2.3 V to
2.7 V
25°C
2.5 V
5
Full
2.3 V to
2.7 V
4
25°C
2.5 V
4
Full
2.3 V to
2.7 V
4
TYP MAX
UNIT
Dynamic
4
7.0
11.5
Turn-on time,
IN or OE
tON
VCOM = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 17
Turn-off time,
IN or OE
tOFF
VCOM = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 17
Make-beforebreak time
tMBB
VCOM = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 18
Charge injection
QC
VGEN = 0,
RGEN = 0,
CL = 1 nF,
See Figure 22
25°C
2.5 V
7
pC
3.5
12
11.5
18.5
21
6.3
ns
ns
15
16
ns
NC, NO
OFF
capacitance
CNC(OFF),
CNO(OFF)
VNC or VNO = V+ or GND,
Switch OFF,
See Figure 16
25°C
2.5 V
19
pF
NC, NO
ON
capacitance
CNC(ON),
CNO(ON)
VNC or VNO = V+ or GND,
Switch ON,
See Figure 16
25°C
2.5 V
57
pF
COM OFF
capacitance
CCOM(OFF)
VCOM = V+ or GND,
Switch ON,
See Figure 16
25°C
2.5 V
36
pF
COM ON
capacitance
CCOM(ON)
VCOM = V+ or GND,
Switch ON,
See Figure 16
25°C
2.5 V
57
pF
Digital input
capacitance
CI
VI = V+ or GND,
See Figure 16
25°C
2.5 V
2
pF
Bandwidth
BW
RL = 50 Ω,
Switch ON,
See Figure 19
25°C
2.5 V
100
MHz
OFF isolation
OISO
RL = 50 Ω,
f = 1 MHz,
Switch OFF,
See Figure 20
25°C
2.5 V
–64
dB
Crosstalk
XTALK
RL = 50 Ω,
f = 1 MHz,
Switch ON,
See Figure 21
25°C
2.5 V
–64
dB
Total harmonic
distortion
THD
RL = 600 Ω,
CL = 50 pF,
f = 20 Hz to 20 kHz,
See Figure 23
25°C
2.5 V
0.020
%
VI = V+ or GND,
Switch ON or OFF
Supply
Positive supply
current
I+
25°C
Full
2.7 V
0.001
0.05
0.15
Submit Documentation Feedback
Copyright © 2005–2009, Texas Instruments Incorporated
Product Folder Link(s): TS5A3154
µA
9
TS5A3154
SCDS191B – MARCH 2005 – REVISED MAY 2009........................................................................................................................................................... www.ti.com
Electrical Characteristics for 1.8-V Supply (1)
V+ = 1.65 V to 1.95 V, TA = –40°C to 85°C (unless otherwise noted)
PARAMETER
SYMBOL
TEST CONDITIONS
TA
V+
MIN
TYP MAX
0
V+
UNIT
Analog
Switch
Analog signal
range
VCOM, VNO,
VNC
Peak ON
resistance
rpeak
ON-state
resistance
ron
ON-state
resistance
matching
between
channels
ON-state
resistance
flatness
NC, NO
OFF leakage
current
COM
OFF leakage
current
Δron
ron(flat)
25°C
VNO or VNC = 1.5 V,
ICOM = –2 mA,
Switch ON,
See Figure 13
25°C
VNO or VNC = 1.5 V,
ICOM = –2 mA,
Switch ON,
See Figure 13
0 ≤ (VNO or VNC) ≤ V+,
ICOM = –2 mA,
Switch ON,
See Figure 13
VNO or VNC = 0.6 V, 1.5 V,
ICOM = –2 mA,
Switch ON,
See Figure 13
VNC or VNO = 0.3 V,
VCOM = 1.65 V,
or
VNC or VNO = 1.65 V,
VCOM = 0.3 V,
Switch OFF,
See Figure 14
VNC or VNO = 0 to 1.95 V,
VCOM = 1.95 V to 0,
Switch OFF,
See Figure 14
INC(ON),
INO(ON)
VNC or VNO = 0.3 V,
VCOM = Open,
or
VNC or VNO = 1.65 V,
VCOM = Open,
Switch ON,
See Figure 15
ICOM(OFF)
VNC or VNO = 1.65 V,
VCOM = 0.3 V,
or
VNC or VNO = 0.3 V,
VCOM = 1.65 V,
Switch OFF,
See Figure 14
VNC or VNO = 1.95 V to 0,
VCOM = 0 to 1.95 V,
Switch OFF,
See Figure 14
VNC or VNO = Open,
VCOM = 0.3 V,
or
VNC or VNO = Open,
VCOM = 1.65 V,
Switch ON,
See Figure 15
INC(OFF),
INO(OFF)
ICOM(PWROFF)
COM
ON leakage
current
Switch ON,
See Figure 13
Full
Full
5.5
1.65 V
ICOM(ON)
Full
2
1.65 V
0.16
1.65 V
Full
3
1.95 V
0V
1.95 V
25°C
Full
0V
25°C
Full
20
Ω
–1
1
10
1.5
1.5
–10
1
10
1.5
µA
nA
20
50
0.06
nA
20
50
–50
–20
1.95 V
0.1
–50
–1
20
50
–10
–20
1.95 V
1.5
–50
–20
25°C
Full
Ω
25
–20
25°C
Full
Ω
3
Full
25°C
Ω
0.3
0.3
1.65 V
25°C
Full
2.7
3.1
25°C
25°C
25
30
25°C
INC(PWROFF),
INO(PWROFF)
NC, NO
ON leakage
current
0 ≤ (VNO or VNC) ≤ V+,
ICOM = –2 mA,
V
nA
µA
20
–50
50
nA
Digital Control Inputs (IN, EN) (2)
Input logic high
VIH
Full
1.5
5.6
V
Input logic low
VIL
Full
0
0.6
V
25°C
–100
Input leakage
current
(1)
(2)
10
IIH, IIL
VI = 5.5 V or 0
Full
1.95 V
–100
25
100
100
nA
The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum
All unused digital inputs of the device must be held at V+ or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
Submit Documentation Feedback
Copyright © 2005–2009, Texas Instruments Incorporated
Product Folder Link(s): TS5A3154
TS5A3154
www.ti.com........................................................................................................................................................... SCDS191B – MARCH 2005 – REVISED MAY 2009
Electrical Characteristics for 1.8-V Supply (continued)
V+ = 1.65 V to 1.95 V, TA = –40°C to 85°C (unless otherwise noted)
PARAMETER
SYMBOL
TEST CONDITIONS
TA
V+
MIN
TYP MAX
25°C
5V
5
20.5
Full
1.65 V to
1.95 V
4.5
21
25°C
5V
7
Full
1.65 V to
1.95 V
5
25°C
5V
4
Full
1.65 V to
1.95 V
4
UNIT
Dynamic
Turn-on time,
IN or OE
tON
VCOM = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 17
Turn-off time,
IN or OE
tOFF
VCOM = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 17
Make-beforebreak time
tMBB
VCOM = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 18
Charge
injection
QC
VGEN = 0,
RGEN = 0,
CL = 1 nF,
See Figure 22
25°C
1.8 V
5
pC
16.5
27.5
30
8.3
ns
ns
15
16
ns
NC, NO
OFF
capacitance
CNC(OFF),
CNO(OFF)
VNC or VNO = V+ or GND,
Switch OFF,
See Figure 16
25°C
1.8 V
19
pF
NC, NO
ON
capacitance
CNC(ON),
CNO(ON)
VNC or VNO = V+ or GND,
Switch ON,
See Figure 16
25°C
1.8 V
57
pF
COM OFF
capacitance
CCOM(OFF)
VCOM = V+ or GND,
Switch ON,
See Figure 16
25°C
1.8 V
36
pF
COM ON
capacitance
CCOM(ON)
VCOM = V+ or GND,
Switch ON,
See Figure 16
25°C
1.8 V
57
pF
Digital input
capacitance
CI
VI = V+ or GND,
See Figure 16
25°C
1.8 V
2.0
pF
Bandwidth
BW
RL = 50 Ω,
Switch ON,
See Figure 19
25°C
1.8 V
100
MHz
OFF isolation
OISO
RL = 50 Ω,
f = 1 MHz,
Switch OFF,
See Figure 20
25°C
1.8 V
–64
dB
Crosstalk
XTALK
RL = 50 Ω,
f = 1 MHz,
Switch ON,
See Figure 21
25°C
1.8 V
–64
dB
Total harmonic
distortion
THD
RL = 600 Ω,
CL = 50 pF,
f = 20 Hz to 20
kHz,
See Figure 23
25°C
1.8 V
0.060
%
VI = V+ or GND,
Switch ON or OFF
Supply
Positive supply
current
I+
25°C
Full
1.95 V
0.001
0.05
0.1
Submit Documentation Feedback
Copyright © 2005–2009, Texas Instruments Incorporated
Product Folder Link(s): TS5A3154
µA
11
TS5A3154
SCDS191B – MARCH 2005 – REVISED MAY 2009........................................................................................................................................................... www.ti.com
TYPICAL PERFORMANCE
ron (Ω)
ron (Ω)
ron (Ω)
TA = 25°C
TA = 85°C
TA = 25°C
TA = –40°C
Figure 1. ron vs VCOM
Figure 2. ron vs VCOM (V+ = 3 V)
Figure 3. ron vs VCOM (V+ = 5 V)
Figure 4. Leakage Current vs Temperature
(V+ = 5.5 V)
Figure 5. Charge Injection (QC) vs VCOM
Figure 6. tON and tOFF vs Supply Voltage
TA = 85°C
TA = 25°C
TA = –40°C
TA (°C)
12
Submit Documentation Feedback
Copyright © 2005–2009, Texas Instruments Incorporated
Product Folder Link(s): TS5A3154
TS5A3154
www.ti.com........................................................................................................................................................... SCDS191B – MARCH 2005 – REVISED MAY 2009
TYPICAL PERFORMANCE (continued)
TA (°C)
Figure 7. tON and tOFF vs Temperature (V+ = 5 V)
Figure 8. Logic-Level Threshold vs V+
Figure 9. Bandwidth (V+ = 5 V)
Figure 10. OFF Isolation and Crosstalk (V+ = 5 V)
Figure 11. Total Harmonic Distortion (THD)
vs Frequency
Figure 12. Power Supply Current vs Temperature
(V+ = 5 V)
TA (ºC)
Submit Documentation Feedback
Copyright © 2005–2009, Texas Instruments Incorporated
Product Folder Link(s): TS5A3154
13
TS5A3154
SCDS191B – MARCH 2005 – REVISED MAY 2009........................................................................................................................................................... www.ti.com
PIN DESCRIPTION
PIN NO.
NAME
1
COM
DESCRIPTION
2
EN
3
GND
Digital ground
4
GND
Digital ground
5
IN
Digital control to connect the COM to NO or NC
6
NO
Normally open
7
NC
Normally closed
8
V+
Power supply
Common
Enable control input
PARAMETER DESCRIPTION
SYMBOL
VCOM
Voltage at COM
VNC
Voltage at NC
VNO
Voltage at NO
ron
Resistance between COM and NC or COM and NO ports when the channel is ON
Δron
Difference of ron between channels in a specific device
ron(flat)
Difference between the maximum and minimum value of ron in a channel over the specified range of conditions
INC(OFF)
Leakage current measured at the NC port, with the corresponding channel (NC to COM) in the OFF state
INO(OFF)
Leakage current measured at the NO port, with the corresponding channel (NO to COM) in the OFF state
INC(ON)
Leakage current measured at the NC port, with the corresponding channel (NC to COM) in the ON state and the output
(COM) open
INO(ON)
Leakage current measured at the NO port, with the corresponding channel (NO to COM) in the ON state and the output
(COM) open
ICOM(ON)
Leakage current measured at the COM port, with the corresponding channel (COM to NO or COM to NC) in the ON state and
the output (NC or NO) open
VIH
Minimum input voltage for logic high for the control input (IN)
VIL
Maximum input voltage for logic low for the control input (IN)
VI
Voltage at the control input (IN)
IIH, IIL
Leakage current measured at the control input (IN)
tON
Turn-on time for the switch. This parameter is measured under the specified range of conditions and by the propagation delay
between the digital control (IN) signal and analog output (COM, NC, or NO) signal when the switch is turning ON.
tOFF
Turn-off time for the switch. This parameter is measured under the specified range of conditions and by the propagation delay
between the digital control (IN) signal and analog output (COM, NC, or NO) signal when the switch is turning OFF.
tBBM
Break-before-make time. This parameter is measured under the specified range of conditions and by the propagation delay
between the output of two adjacent analog channels (NC and NO) when the control signal changes state.
QC
Charge injection is a measurement of unwanted signal coupling from the control (IN) input to the analog (NC, NO, or COM)
output. This is measured in coulomb (C) and measured by the total charge induced due to switching of the control input.
Charge injection, QC = CL × ΔVCOM, CL is the load capacitance and ΔVCOM is the change in analog output voltage.
CNC(OFF)
Capacitance at the NC port when the corresponding channel (NC to COM) is OFF
CNO(OFF)
Capacitance at the NO port when the corresponding channel (NO to COM) is OFF
CNC(ON)
Capacitance at the NC port when the corresponding channel (NC to COM) is ON
CNO(ON)
Capacitance at the NO port when the corresponding channel (NO to COM) is ON
CCOM(ON)
CI
Capacitance at the COM port when the corresponding channel (COM to NC or COM to NO) is ON
Capacitance of control input (IN)
OISO
OFF isolation of the switch is a measurement of OFF-state switch impedance. This is measured in dB in a specific frequency,
with the corresponding channel (NC to COM or NO to COM) in the OFF state.
XTALK
Crosstalk is a measurement of unwanted signal coupling from an ON channel to an OFF channel (NC to NO or NO to NC).
This is measured in a specific frequency and in dB.
BW
14
DESCRIPTION
Bandwidth of the switch. This is the frequency where the gain of an ON channel is –3 dB below the DC gain.
Submit Documentation Feedback
Copyright © 2005–2009, Texas Instruments Incorporated
Product Folder Link(s): TS5A3154
TS5A3154
www.ti.com........................................................................................................................................................... SCDS191B – MARCH 2005 – REVISED MAY 2009
PARAMETER DESCRIPTION (continued)
SYMBOL
DESCRIPTION
THD
Total harmonic distortion describes the signal distortion caused by the analog switch. This is defined as the ratio of root mean
square (RMS) value of the second, third, and higher harmonic to the absolute magnitude of fundamental harmonic.
I+
Static power-supply current with the control (IN) pin at V+ or GND
PARAMETER MEASUREMENT INFORMATION
V+
VNC NC
COM
+
VCOM
Channel ON
VNO NO
VI
r on +
IN or EN
ICOM
VCOM * VNO or VNC
W
I COM
VI = VIH or VIL
+
GND
Figure 13. ON-State Resistance (ron)
V+
VNC NC
COM
+
VI
VCOM
+
VNO NO
IN or EN
OFF-State Leakage Current
Channel OFF
VI = VIH or VIL
+
GND
Figure 14. OFF-State Leakage Current (INC(OFF), INO(OFF), INO(PWROFF), ICOM(PWROFF))
Submit Documentation Feedback
Copyright © 2005–2009, Texas Instruments Incorporated
Product Folder Link(s): TS5A3154
15
TS5A3154
SCDS191B – MARCH 2005 – REVISED MAY 2009........................................................................................................................................................... www.ti.com
PARAMETER MEASUREMENT INFORMATION (continued)
V+
VNC NC
COM
+
VCOM
VNO NO
VI
ON-State Leakage Current
Channel ON
VI = VIH or VIL
IN or EN
+
GND
Figure 15. ON-State Leakage Current (ICOM(ON), INC(ON), INO(ON))
V+
Capacitance
Meter
VNC
NC
VNO
NO
VBIAS = V+ or GND
VI = VIH or VIL
VCOM COM
Capacitance is measured at NC,
NO, COM, and IN inputs during
ON and OFF conditions.
VBIAS
VI
IN or EN
GND
Figure 16. Capacitance (CI, CCOM(OFF), CCOM(ON), CNC(OFF), CNO(OFF), CNC(ON), CNO(ON))
16
Submit Documentation Feedback
Copyright © 2005–2009, Texas Instruments Incorporated
Product Folder Link(s): TS5A3154
TS5A3154
www.ti.com........................................................................................................................................................... SCDS191B – MARCH 2005 – REVISED MAY 2009
PARAMETER MEASUREMENT INFORMATION (continued)
V+
VCOM
NC or NO
VNC or VNO
NC or NO
CL(2)
TEST
RL
CL
VCOM
tON
50 Ω
35 pF
V+
tOFF
50 Ω
35 pF
V+
COM
RL
IN or EN
V+
Logic
Input
(VI)
VI
Logic
Input(1)
GND
50%
0
tON
Switch
Output
(VNC or VNO)
(1)
(2)
50%
tOFF
90%
90%
All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω, tr < 5 ns, tf < 5 ns.
CL includes probe and jig capacitance.
Figure 17. Turn-On (tON) and Turn-Off Time (tOFF)
V+
NC
VCOM
COM
NO
VNO
CL(2)
RL
VI
(1)
(2)
50%
0
VNC
0.8 VOUT
Switch
Output
IN or EN
Logic
Input(1)
V+
Logic
Input
(VI)
VNC
CL(2)
RL
0.8 VOUT
VNO
GND
tMBB
VCOM = V+
RL = 50 Ω
CL = 35 pF
All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω, tr < 5 ns, tf < 5 ns.
CL includes probe and jig capacitance.
Figure 18. Make-Before-Break Time (tMBB)
Submit Documentation Feedback
Copyright © 2005–2009, Texas Instruments Incorporated
Product Folder Link(s): TS5A3154
17
TS5A3154
SCDS191B – MARCH 2005 – REVISED MAY 2009........................................................................................................................................................... www.ti.com
PARAMETER MEASUREMENT INFORMATION (continued)
V+
Network Analyzer
50 W
VNC
NC
Channel ON: NC to COM
COM
Source
Signal
VCOM
VI = V+ or GND
NO
Network Analyzer Setup
INor EN
VI
50 W
Source Power = 0 dBm
(632-mV P-P at 50-W load)
+
GND
DC Bias = 350 mV
Figure 19. Bandwidth (BW)
V+
Network Analyzer
Channel OFF: NC to COM
50 W
VNC
NC
VI = V+ or GND
COM
Source
Signal
50 W
VCOM
NO
Network Analyzer Setup
IN or EN
Source Power = 0 dBm
(632-mV P-P at 50-W load)
VI
50 W
+
GND
DC Bias = 350 mV
Figure 20. OFF Isolation (OISO)
V+
Network Analyzer
Channel ON: NC to COM
50 W
VNC
Channel OFF: NO to COM
NC
VCOM
Source
Signal
VNO
NO
IN or EN
50 W
VI
50 W
+
VI = V+ or GND
GND
Network Analyzer Setup
Source Power = 0 dBm
(632-mV P-P at 50-W load)
DC Bias = 350 mV
Figure 21. Crosstalk (XTALK)
18
Submit Documentation Feedback
Copyright © 2005–2009, Texas Instruments Incorporated
Product Folder Link(s): TS5A3154
TS5A3154
www.ti.com........................................................................................................................................................... SCDS191B – MARCH 2005 – REVISED MAY 2009
PARAMETER MEASUREMENT INFORMATION (continued)
V+
RGEN
VGEN
Logic
Input
(VI)
OFF
ON
OFF V
IL
NC or NO
COM
+
VIH
VCOM
∆VCOM
VCOM
NC or NO
CL(2)
IN or EN
VGEN = 0 to V+
VI
Logic
Input(1)
(1)
(2)
RGEN = 0
CL = 0.1 nF
QC = CL × ∆VCOM
VI = VIH or VIL
GND
All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω, tr < 5 ns, tf < 5 ns.
CL includes probe and jig capacitance.
Figure 22. Charge Injection (QC)
Channel ON: COM to NC
VSOURCE = V+ P-P
VI = VIH or VIL
RL = 600 Ω
fSOURCE = 20 Hz to 20 kHz
CL = 50 pF
V+/2
V+
Audio Analyzer
RL
10 mF
Source
Signal
10 mF
NC
COM
CL(1)
NO
600 W
600 W
VI
IN
+
GND
600 W
(1)
CL includes probe and jig capacitance.
Figure 23. Total Harmonic Distortion (THD)
Submit Documentation Feedback
Copyright © 2005–2009, Texas Instruments Incorporated
Product Folder Link(s): TS5A3154
19
PACKAGE OPTION ADDENDUM
www.ti.com
22-Jul-2008
PACKAGING INFORMATION
Orderable Device
Status (1)
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
TS5A3154DCUR
ACTIVE
US8
DCU
8
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TS5A3154DCURE4
ACTIVE
US8
DCU
8
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TS5A3154DCURE6
PREVIEW
US8
DCU
8
3000
TS5A3154DCURG4
ACTIVE
US8
DCU
8
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TS5A3154YZPR
ACTIVE
DSBGA
YZP
8
3000 Green (RoHS &
no Sb/Br)
SNAGCU
Level-1-260C-UNLIM
TBD
Lead/Ball Finish
Call TI
MSL Peak Temp (3)
Call TI
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
5-Aug-2009
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
Diameter Width (mm)
(mm) W1 (mm)
B0
(mm)
K0
(mm)
P1
(mm)
W
Pin1
(mm) Quadrant
TS5A3154DCUR
US8
DCU
8
3000
180.0
9.2
2.25
3.35
1.05
4.0
8.0
Q3
TS5A3154YZPR
DSBGA
YZP
8
3000
180.0
8.4
1.02
2.02
0.63
4.0
8.0
Q1
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
5-Aug-2009
*All dimensions are nominal
Device
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
TS5A3154DCUR
US8
DCU
8
3000
202.0
201.0
28.0
TS5A3154YZPR
DSBGA
YZP
8
3000
220.0
220.0
34.0
Pack Materials-Page 2
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Applications
Amplifiers
amplifier.ti.com
Audio
www.ti.com/audio
Data Converters
dataconverter.ti.com
Automotive
www.ti.com/automotive
DLP® Products
www.dlp.com
Communications and
Telecom
www.ti.com/communications
DSP
dsp.ti.com
Computers and
Peripherals
www.ti.com/computers
Clocks and Timers
www.ti.com/clocks
Consumer Electronics
www.ti.com/consumer-apps
Interface
interface.ti.com
Energy
www.ti.com/energy
Logic
logic.ti.com
Industrial
www.ti.com/industrial
Power Mgmt
power.ti.com
Medical
www.ti.com/medical
Microcontrollers
microcontroller.ti.com
Security
www.ti.com/security
RFID
www.ti-rfid.com
Space, Avionics &
Defense
www.ti.com/space-avionics-defense
RF/IF and ZigBee® Solutions www.ti.com/lprf
Video and Imaging
www.ti.com/video
Wireless
www.ti.com/wireless-apps
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2010, Texas Instruments Incorporated