IGBT High Voltage, Low VCE(sat) IXGH 45N120 VCES IXGT 45N120 IC25 VCE(sat) tfi(typ) = 1200 V = 75 A = 2.5 V = 390 ns Preliminary data sheet Symbol Test Conditions Maximum Ratings VCES TJ = 25°C to 150°C 1200 V VCGR TJ = 25°C to 150°C; RGE = 1 MΩ 1200 V VGES Continuous ±20 V VGEM Transient ±30 V IC25 TC = 25°C, limited by leads 75 A IC90 TC = 90°C 45 A ICM TC = 25°C, 1 ms 180 A SSOA (RBSOA) VGE = 15 V, TVJ = 125°C, RG = 5 Ω Clamped inductive load PC TC = 25°C TJ ICM = 90 @ 0.8 VCES A 300 W TO-268 (IXGT) G E TO-247 AD (IXGH) G °C -55 ... +150 G = Gate, E = Emitter, TJM 150 °C Tstg -55 ... +150 °C Features 300 °C l 260 °C Maximum Lead temperature for soldering 1.6 mm (0.062 in.) from case for 10 s Maximum Tab temperature for soldering SMD devices for 10 s l Md Mounting torque (M3) 1.13/10Nm/lb.in. Weight TO-247 AD TO-268 6 4 g g C (TAB) l l C (TAB) C E C = Collector, TAB = Collector International standard packages JEDEC TO-268 and JEDEC TO-247 AD High current handling capability MOS Gate turn-on - drive simplicity Molding epoxies meet UL 94 V-0 flammability classification Applications l l Symbol Test Conditions BVCES VGE(th) IC IC ICES VCE = VCES VGE = 0 V IGES VCE = 0 V, VGE = ±20 V VCE(sat) IC Characteristic Values (TJ = 25°C, unless otherwise specified) min. typ. max. = 1 mA, VGE = 0 V = 750 µA, VCE = VGE 1200 2.5 TJ = 25°C TJ = 125°C 5 V V 250 2 µA mA ±100 nA 2.5 V l l l l Advantages l l l = IC90, VGE = 15 V © 2001 IXYS All rights reserved AC motor speed control DC servo and robot drives DC choppers Uninterruptible power supplies (UPS) Switched-mode and resonant-mode power supplies Capacitor discharge High power density Suitable for surface mounting Easy to mount with 1 screw, (isolated mounting screw hole) 98666A (11/01) IXGH 45N120 IXGT 45N120 Symbol Test Conditions Characteristic Values (TJ = 25°C, unless otherwise specified) min. typ. max. gfs IC = IC90; VCE = 10 V, Pulse test, t ≤ 300 µs, duty cycle ≤ 2 % IC(ON) VGE = 10V, VCE = 10V 33 44 S 220 A 4700 pF 255 pF Cres 89 pF Qg 170 nC 28 nC 57 nC 55 ns Cies Coes TO-247 AD Outline ∅P VCE = 25 V, VGE = 0 V, f = 1 MHz e Qge IC = IC90, VGE = 15 V, VCE = 0.5 VCES Qgc td(on) Inductive load, TJ = 25°°C tri IC = IC90, VGE = 15 V VCE = 0.8 VCES, RG = Roff = 5 Ω td(off) tfi Eoff td(on) tri Eon td(off) tfi Eoff Remarks: Switching times may increase for VCE (Clamp) > 0.8 • VCES, higher TJ or increased RG Inductive load, TJ = 125°°C IC = IC90, VGE = 15 V VCE = 0.8 VCES, RG = Roff = 5 Ω Remarks: Switching times may increase for VCE (Clamp) > 0.8 • VCES, higher TJ or increased RG 28 800 ns 390 700 ns 14 25 mJ 64 ns 32 ns 3.0 mJ 660 ns 740 ns 25 mJ RthJC RthCK ns 370 Dim. Millimeter Min. Max. A 4.7 5.3 A1 2.2 2.54 A2 2.2 2.6 b 1.0 1.4 b1 1.65 2.13 b2 2.87 3.12 C .4 .8 D 20.80 21.46 E 15.75 16.26 e 5.20 5.72 L 19.81 20.32 L1 4.50 ∅P 3.55 3.65 Q 5.89 6.40 R 4.32 5.49 S 6.15 BSC Inches Min. Max. .185 .209 .087 .102 .059 .098 .040 .055 .065 .084 .113 .123 .016 .031 .819 .845 .610 .640 0.205 0.225 .780 .800 .177 .140 .144 0.232 0.252 .170 .216 242 BSC TO-268 Outline 0.42 K/W (TO-247) 0.25 K/W Dim. Min Recommended Footprint A A1 A2 b b2 C D E E1 e H L L1 Millimeter Min. Max. 4.9 5.1 2.7 2.9 .02 .25 1.15 1.45 1.9 2.1 .4 .65 13.80 14.00 15.85 16.05 13.3 13.6 5.45 BSC 18.70 19.10 2.40 2.70 1.20 1.40 Inches Min. Max. .193 .201 .106 .114 .001 .010 .045 .057 .75 .83 .016 .026 .543 .551 .624 .632 .524 .535 .215 BSC .736 .752 .094 .106 .047 .055 L2 L3 L4 1.00 1.15 0.25 BSC 3.80 4.10 .039 .045 .010 BSC .150 .161 IXYS reserves the right to change limits, test conditions, and dimensions. IXYS MOSFETS and IGBTs are covered by one or more of the following U.S. patents: 4,835,592 4,850,072 4,881,106 4,931,844 5,017,508 5,034,796 5,049,961 5,063,307 5,187,117 5,237,481 5,486,715 5,381,025