OTS-1V1DTR Optiva Standard, 1 Composite Video and 1 Duplex RS-232/422/485 Data ™ Composite Video and Data The OTS-1V1DTR provides for the digital transmission of 1 Channel of Composite Video and 1 Channel of Duplex Serial Data. Video Audio Data System Design 1 Serial Data In/Out All units come in an insert card version. The cards can be inserted into our 16-slot, 19” rack-mountable card cage (OT-CC-16-100) or one of our smaller Optiva™ Desktop Card Racks (OT-DTCR Series). The Optiva™ Desktop Card Racks can handle one, two or four insert cards, creating compact, mountable, stand alone systems. The use of separate OT-DTCR enclosures allows for future flexibility and expansion as all cards are hot-swappable and can be used in any enclosure. Each one of our card housing units operate with an appropriate power supply. See “Accessories” for power supply specifications. A L E R T S T A T U S Composite Video In A L E R T S T A T U S ST, LC, SC or FC 1 Serial Data Out/In Each insert card comes with a label identifying the specific protocols handled, connector pin-out and other vital information. Composite Video Out For optimal bandwidth allocation, each insert card can daisy-chain with an additional card in the same chassis. See “Optiva™ Upgrade Path”. ST, LC, SC or FC Optiv a™ Optiv a™ VAD Transmission VAD Transmission OTS-1VT1DTR OTS-1VR1DRT Features • Composite Video and Serial Data over one fiber • 10-Bit Digital Transmission • TDM - Single fiber, dual wavelength Optiva™ Upgrade Path This system can be purchased without an optical port as an add-on to an existing Optiva™ system daisy-chain. (See “Non-Optical Version” below). The Optiva™ bandwidth requirement of this system is 360 Mbps. • Complies with SMPTE standards for Video transmission • Compatible with MDM-7000 Series for WDM and CWDM multiplexing • No EMI or RFI and no ground loops • Stand alone or rack-mount • Ideal for Camera PTZ applications Versions Available* Wavelength (nm) & Fiber Transmit/Receive** Receive/Transmit** 1310/1550 Multimode 1310/1550 Singlemode 1310/1550 SM (D) 1310/1550 SM (H) 1270-1610 SM (CWDM) OTS-1VTDTR-A1/A3M-XX-IC OTS-1VTDTR-A2/A3-XX-IC OTS-1VTDTR-A2/A3D-XX-IC OTS-1VTDTR-A2/A3H-XX-IC OTS-1VTDTR-L4/L4-XX-IC OTS-1VRDRT-A3M/A1-XX-IC OTS-1VRDRT-A3/A2-XX-IC OTS-1VRDRT-A3D/A2-XX-IC OTS-1VRDRT-A3H/A2-XX-IC OTS-1VRDRT-L4/L4-XX-IC Non-Optical Version OTS-1VTDTR-NOC-IC OTS-1VRDRT-NOC-IC Optical Connector Optical Budget (dB) Range*** (km) Form Factor ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC 10 12 17 25 Varies 3 20 40 60 20-70 IC (1-slot) IC (1-slot) IC (1-slot) IC (1-slot) IC (1-slot) N/A N/A N/A IC (1-slot) Serial Data Codes - "D" indicates RS-232. For other Serial Data preferences, please use: "DJ" = RS-422; "DK" = RS-485 (2W); and "DW" = RS-485 (4W). * Contact Opticomm for other versions available. ** XX indicates the type of optical connector. Each of ST, FC, LC or SC are available. *** Chromatic dispersion and additional losses should be taken into account. 800-867-8426 • [email protected] • www.opticomm.com • Contact Opticomm for custom requirements. Opticomm reserves the right to change specifications without notice Composite Video, Audio & Data Video Standard Bit Resolution Level Bandwidth Differential Gain Differential Phase Compatibility Signal to Noise Ratio Connector Data Connector RS-232, RS-422 Data Rate RS-485 (2 Wire) Data Rate RS-485 (4 Wire) Data Rate Contact Closure General Dimensions & Weight Operating temperature Storage temperature Humidity Operating voltage Consumption System Latency Local Monitoring Remote Monitoring Sample Configuration Optiva™™Configurable Multi-Signal Optiva Transmission Platform Platform Communication SMPTE 170M; RS-250C 10-Bit Processing; 10-Bit Transmission 1.0 Volt p-p 5.5 MHz < 1% < 0.7° NTSC, PAL > 67 dB BNC (IEC 60169-8) Network Management Management Network SDI HD-SDI SDIand & HD-SDI Composite Video, Video, Composite Audio & & Data Data Audio Audio/FSK/Intercom RGB/VGA/DVI RGB/VGA/DVI Audio/FSK/Intercom Data (Ethernet/Serial/USB) (Ethernet/Serial/USB) Data Micro DB25 CATV/RF & & L-Band L-Band CATV/RF DC to 1 Mbps Optical Switching, Switching, Routing Routing Optical & Redundancy & Redundancy DC to 1 Mbps Passive Multiplexing Multiplexing Passive Solutions Solutions DC to 1 Mbps Insert Card (IC): 6.3” L x 0.8” W x 4.0” H -20° C to +55° C -40° C to +85° C 0 to 95% non-condensing 9-12 VDC 1 Amp Max per Insert Card Less than 1ms Enclosures, Racks Racks Enclosures, & Frames Frames & 11 oz Power Supplies Supplies Power and Accessories & Accessories LED Status Indication Compatible with OptivaView™ SNMP Management Suite MADE IN THE USA