OTS-32DA Optiva Standard, 32 Stereo AES/EBU Digital Audio ™ Digital Audio Transmission ST, LC, SC or FC The OTS-32DA provides for the transmission of 32 Channels of Stereo AES/EBU Digital Audio, at absolute broadcast quality. Video Audio Data AES/EBU Audio In A L E R T S T A T U S A L E R T S T A T U S A L E R T S T A T U S A L E R T S T A T U S AES/EBU Audio In System Design All units come in an insert card version. The cards can be inserted into our 16-slot, 19” rack-mountable card cage (OT-CC-16-100) or one of our smaller Optiva™ Desktop Card Racks (OT-DTCR Series). The Optiva™ Desktop Card Racks can handle one, two or four insert cards, creating compact, mountable, stand alone systems. The use of separate OT-DTCR enclosures allows for future flexibility and expansion as all cards are hot-swappable and can be used in any enclosure. Each one of our card housing units operate with an appropriate power supply. See “Accessories” for power supply specifications. Optiv a™ Optiv a™ Optiv a™ Optiv a™ VAD Transmission VAD Transmission VAD Transmission VAD Transmission OTS-32DAT ST, LC, SC or FC AES/EBU Audio Out A L E R T S T A T U S A L E R T S T A T U S A L E R T S T A T U S A L E R T S T A T U S AES/EBU Audio Out Optiv a™ Optiv a™ Optiv a™ Optiv a™ VAD Transmission VAD Transmission VAD Transmission VAD Transmission OTS-32DAR Features • Stereo AES/EBU Digital Audio over one fiber • TDM - Single Wavelength Optiva™ Upgrade Path This system can be purchased without an optical port as an add-on to an existing Optiva™ system daisy-chain. (See “Non-Optical Version” below). • Compatible with MDM-7000 Series for WDM and CWDM multiplexing • No EMI or RFI and no ground loops • Stand alone or rack-mount • Ideal for Professional AV applications The Optiva™ bandwidth requirement of this system is 160 Mbps. Versions Available* Wavelength (nm) & Fiber Transmit** Receive** 1310 Multimode 1310 Singlemode 1310 Singlemode (D) 1550 Singlemode 1550 Singlemode (D) 1270-1610 SM (CWDM) OTS-32DAT-A1-XX-IC OTS-32DAT-A2-XX-IC OTS-32DAT-A2D-XX-IC OTS-32DAT-A3-XX-IC OTS-32DAT-A3D-XX-IC OTS-32DAT-L4-XX-IC OTS-32DAR-A1-XX-IC OTS-32DAR-A2-XX-IC OTS-32DAR-A2D-XX-IC OTS-32DAR-A3-XX-IC OTS-32DAR-A3D-XX-IC OTS-32DAR-L4-XX-IC Non-Optical Version OTS-32DAT-NOC-IC OTS-32DAR-NOC-IC Optical Connector Optical Budget (dB) Range*** (km) Form Factor ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC 10 7 12 17 25 Varies 3 10 20 40 60 20-70 IC (8-slots) IC (8-slots) IC (8-slots) IC (8-slots) IC (8-slots) IC (8-slots) N/A N/A N/A IC (8-slots) * Contact Opticomm for other versions available. ** XX indicates the type of optical connector. Each of ST, FC, LC or SC are available. *** Chromatic dispersion and additional losses should be taken into account. 800-867-8426 • [email protected] • www.opticomm.com • Contact Opticomm for custom requirements. Opticomm reserves the right to change specifications without notice Audio/FSK/Intercom Audio Digital Format Connector General Dimensions & Weight Operating temperature Storage temperature Humidity Operating voltage Consumption System Latency Local Monitoring Remote Monitoring Optiva™ Configurable AES/EBU AES3-1992 (ANSI S4,40) SMPTE 276M Micro DB25 Communication Platform Network Management SDI & HD-SDI Insert Card (IC): 6.3” L x 0.8” W x 4.0” H -20° C to +55° C -40° C to +85° C 0 to 95% non-condensing 9-12 VDC Composite Video, Audio & Data 11 oz RGB/VGA/DVI Audio/FSK/Intercom Data (Ethernet/Serial/USB) 1 Amp Max per Insert Card Less than 10ms CATV/RF & L-Band Optical Switching, Routing & Redundancy LED Status Indication Passive Multiplexing Solutions Compatible with OptivaView™ SNMP Management Suite Enclosures, Racks & Frames Power Supplies & Accessories MADE IN THE USA Sample Configuration OTS-32DAT 32 - AES/EBU - Stereo OTS-32DAR 32 - AES/EBU - Stereo