OPTICOMM MMV-110STANDARD

MMV-110 Standard
1 Channel 15 MHz Video
Standard-size One-channel (IM)
Video Transmission System
Video
Audio
The MMV-110 Standard is an Intensity
Modulated (IM), LED-based fiber optic
Video transmission system with
Automatic Gain Control (AGC) and an
LED status monitor. It is NTSC, PAL
and SECAM compatible, ideal for the
extension of a B&W or color CCTV
camera.
System Design
Data
865
•
1310
All units come in a small modular or
Insert card version. The cards can be
inserted into our 18 slot, 19" rackmountable card cage (CC-18-80W) or
one of our smaller Desktop Card Racks
(DTCR series). The DTCR series can
handle one, two, four or seven cards,
allowing for greater flexibility and future
expansion. They can sit on a flat surface
as a larger Stand Alone unit, or can be
surface mounted with the flanges
provided. Each one of our card
housings operates with an appropriate
power supply. The regulated switching
power supply has short circuit
protection, and an input operating
voltage of 85-265 VAC. All MMV-110
Standard, Mini and Micro models are
link compatible.
1550
Type
Mode
Wavelength
Suffix
LED
MM
L0
Features
• Multimode operation over one fiber
• 15 MHz video bandwidth with AGC
• True DC Restoration
• Flat Frequency Response
• Complies with RS-170, & 170A EIA
video standards
• Compatible with NTSC, PAL, and
SECAM video signals
• No EMI or RFI and no ground loops
• Stand Alone or Rack Mount
• Ideal for CCTV camera extensions
Fiber
Type
Output
Power
Receiver
Sensitivity
Optical
Loss
Budget
Range*
Conn
Type
50 /125µ
62.5/125µ
-20 dBm
-38 dBm
18 dB
4 km
ST
* Chromatic dispersion and additional losses should be taken into account.
800-867-8426 • [email protected] • www.opticomm.com • Contact Opticomm for custom requirements.
Opticomm reserves the right to change specifications without notice
Composite Video,
Audio & Data
Video
Video in/out impedance
Video in/out level
Video bandwidth
Differential gain
Differential phase
Linearity
Tilt
Compatibility
Connector type
General
Dimensions & Weight
Operating temperature
Storage temperature
Humidity
Operating voltage
Optical Dynamic Range
Vibration
Shock
75 Ω
1 volt peak to peak, 1.5 volts max
10 Hz to 15 MHz @ -3dB
< 1.5 % typical
< 1.5° typical
± 1.1 % typical
≤ .0.5 % typical
NTSC, PAL, SECAM, RS-170, RS-170A
BNC
Network Management
Management
Network
SDI
HD-SDI
SDIand
& HD-SDI
Composite Video,
Video,
Composite
Audio &
& Data
Data
Audio
Audio/FSK/Intercom
RGB/VGA/DVI
RGB/VGA/DVI
Audio/FSK/Intercom
Data (Ethernet/Serial/USB)
(Ethernet/Serial/USB)
Data
2.25” L x 1.25” W x 0.75” H
3 oz
-20° C to +70° C
-30° C to +85° C
0 to 95% non-condensing
12 VDC (200 mA) or 24 VAC (300 mA)
9 dB
Up to 5 g's
Up to 12 g's
Diagnostics
Status monitoring
Optiva™™Configurable
Multi-Signal
Optiva
Transmission Platform
Platform
Communication
LED indication
CATV/RF &
& L-Band
L-Band
CATV/RF
Optical Switching,
Switching, Routing
Routing
Optical
&
Redundancy
& Redundancy
Passive Multiplexing
Multiplexing
Passive
Solutions
Solutions
Enclosures, Racks
Racks
Enclosures,
& Frames
Frames
&
Power Supplies
Supplies
Power
and
Accessories
& Accessories
MADE IN THE USA
Sample Configuration