42095 NEGATIVE HIGH TEMPERATURE REGULATOR Features: Applications: • • • • • • • • • • Output current to 1.5 amps Input voltage to -30V Internal short circuit protection, foldback and current limiting Storage Temperature +250°C 200°C Operating temperature Mii HYBRID MICROELECTRONICS PRODUCTS DIVISION Logging while drilling Measuring while drilling (down-hole applications) Other harsh environments Used as military and industrial devices Designed for use in high temperature environments DESCRIPTION The 42095 series of regulators covers the voltage range from -5 VDC through -30 VDC. These regulators are fabricated using hybrid techniques and will operate at temperatures up to +200°C case. These devices are complete with internal short circuit protection which includes voltage shutdown and current foldback. The 42095 series regulators normally do not require any additional components. However, for good design practice, an external filter cap should be installed at the input, as close to the case as possible. ABSOLUTE MAXIMUM RATINGS AT 200°C Case temperature Output Current (IOUT) ............................................................................................................................................................. 1.5A Input Voltage (VIN) .......................................................................................................................................................... -38VDC Operating Temperature (TC)............................................................................................................................................... 200°C Storage Temperature .........................................................................................................................................–65°C to 200°C Power Dissipation (Pd)...........................................................................................................................................................25W TYPE 42095-005 42095-012 42095-015 42095-018 42095-024 42095-030 TABLE 1 (see note) VOUT VDC MAX IOUT A -5 -12 -15 -18 -24 -30 1.5 1.5 1.5 1.5 1.5 1.5 IKNEE TYP A 2.0 2.0 2.0 2.0 2.0 2.0 NOTE: Under condition (VIN – VOUT x lOUT) ≤ 25 watts at 200°C. Micropac can provide custom output voltages between -5VDC and -30VDC. Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 www.micropac.com E-MAIL: [email protected] 12/14/01 1 42095 NEGATIVE HIGH TEMPERATURE REGULATOR ELECTRICAL CHARACTERISTICS PARAMETER TEST CONDITIONS TEMPERATURE CASE TEMP +25°C to +200°C TYPICAL VOUT ± 1.0% *Output Voltage IOUT = 300 mA VIN = VOUT +3VDC *Line Regulation VIN = VOUT +3VDC to VIN = 38 V IOUT = 50 mA +25°C to +200°C VOUT ± 0.3% Load Regulation VIN = VOUT +5VDC IOUT = 50 to 300mA +25°C to +200°C VOUT ± 0.5% Ripple Rejection at 120 Hz VIN = VOUT +5VDC +25°C -60dB Standby Current VIN = VOUT +5VDC IOUT = 0 +25°C 30mA Short Circuit Current VIN = VOUT +5VDC +25°C 400mA Short Circuit Current VIN = VOUT +5VDC +200°C 200mA Foldback Current (knee) VIN = VOUT +5VDC +25°C 2A Foldback Current (knee) VIN = VOUT +5VDC +200°C 1.5A Noise Output VIN = VOUT +5VDC IOUT = 300 mA +25°C 2mVRMS IOUT = 300 mA +25°C to +200°C 3 VDC MIN Differential Voltage * ( ∆V= VIN – VOUT ) *VIN = 10V Min Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 www.micropac.com E-MAIL: [email protected] 12/14/01 2 42095 NEGATIVE HIGH TEMPERATURE REGULATOR Mechanical Configuration .550 MAX. .83 MAX. DIA. .450 MAX. .135 MAX. .470 .440 1.177 1.197 .655 .657 2 .151 DIA. .161 .420 .440 1 .205 .225 .039 DIA. .043 Typical Connection Diagram D1 RECTIFIED INPUT AS REQUESTED V IN HEADER 2uF V OUT 2 COMMON REGULATED OUTPUT AS REQUESTED Electrical Connection Case VIN Pin 1 Ground Pin 2 VOUT Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 www.micropac.com E-MAIL: [email protected] 12/14/01 3