53254 Mii 40VDC – 10A SOLID STATE RELAY HYBRID MICROELECTRONICS PRODUCTS DIVISION Features: Applications: • • • • • • • • Hermetically Sealed Package 10A Continuous Output Current Optically Coupled Input/Output Isolation Tested to 1000 VDC Shock and Vibration Resistant • Power Distribution/Switching Solenoid Driver Stepper Motor Driver Switching Heaters DESCRIPTION The 53254 is a DC solid state relay (SSR) designed for high reliability industrial applications. This light weight device is resistant to damage from severe shock and vibration, and is immune to contact related problems inherent in electro-mechanical relays. The SSR is enclosed in a hermetic metal package to ensure reliability in harsh environments. Effective isolation of 1000 VDC between control and load circuits is achieved through the use of optical coupling. Functionally, the device operates as a single-pole single-throw, normally open (1 Form A) DC solid-state relay. The SSR is actuated by an input current of 5 to 15 mA, which can be supplied from standard logic types such as opencollector TTL. Output is provided by a power MOSFET capable of carrying a continuous current of 10 amperes. ABSOLUTE MAXIMUM RATINGS Output Voltage ....................................................................................................................................................... 45 VDC Continuous Output current ..........................................................................................................................................10 A Peak Output Current (1) ........................................................................................................................................ 20 A Storage Temperature Range .................................................................................................................. -65ºC to +150ºC Operating Junction Temperature........................................................................................................... -55ºC to +150ºC Lead Solder Temperature for 10 seconds ............................................................................................................. 300ºC Continuous Input Current ........................................................................................................................................25 mA Peak Input Current (2) ........................................................................................................................................... 100 mA Reverse Input Voltage ............................................................................................................................................. 6 VDC WEIGHT: .........................................................................................................................................15 grams (typical) Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 www.micropac.com E-MAIL: [email protected] 05/16/01 53254 40VDC – 10A Solid State Relay RECOMMENDED OPERATING CONDITIONS: Parameter Symbol Output Voltage Min. Max. Units VO (OFF) 40 VDC Continuous Output Current IO (ON) 10 A Input Current (on) IF (ON) 5 15 mA Input Voltage (off) VF (OFF) 0 1 VDC Operating Case Temperature TC -40 85 °C ELECTRICAL SPECIFICATIONS TC= -40°C to +85°C unless otherwise specified Parameter Sym. Min. Typ.* Max. Test Conditions Notes Unit s Output On-Resistance R (ON) .025 .050 Ω IF = 15 mA IO = 1 A Output Leakage Current IO (OFF) <1 250 µA VF = 1 VDC VO = 45 VDC Input Forward Voltage VF 3.75 4.20 VDC IF = 15 mA Input Reverse Breakdown Voltage VR 6 40 VDC IR = 10 µA Input-Output Leakage II-O 1 µA Turn-On Time tON 3.3 8.0 ms Turn-Off time tOFF 0.35 3 ms Rise Time tR 2.5 6.0 ms Fall Time tF .19 2.0 ms θJC 1.8 °C/W Thermal Resistance (junction-case) RH ≤ 45%, t = 5 s VI-O = 1000 VDC TC = 25°C IF = 15 mA IO = 1 A V load = 40 VDC Pulse width = 10 ms Duty cycle ≤ 1% 4, 5 6 * All typical values are at TC = 25°C Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 www.micropac.com E-MAIL: [email protected] 05/16/01 53254 40VDC - 10A Solid State Relay Notes: 1. 2. 3. 4. 5. 6. Non-repetitive, pulse width ≤ 10ms, TC = 25°C. Non-repetitive, pulse width ≤ 100µs, TC = 25°C. Case Temperature TC = 25°C. Input pins shorted together and output pins shorted together. Input-output potential applied momentarily, not an operating condition. Rise time is measured from 10% to 90% of load current (90% to 10% of VO). Fall time is measured from 90% to 10% of load current (10% to 90% of VO). CAUTION: Care should be taken so as not to exceed the maximum power dissipation and maximum junction temperature when repetitively switching loads. INPUT OUTPUT ON ON OFF OFF Figure 1. Truth Table Figure 1. Terminal Connections +DC SUPPLY +V C R LOAD RS -V C TOP VIEW OUTPUT GND Figure 2. Terminal Connections Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 www.micropac.com E-MAIL: [email protected] 05/16/01 53254 40VDC - 10A Solid State Relay C L 1.870 MAX 1.520 0.156 DIA THRU 2 PL 0.760 0.500 C L 1.000 0.170 R 2 PL 45° 4 PL 0.040 DIA, 6 PL 0.125, TYP 5 PLACES TOLERANCES NON-ACCUM 0.120 0.312 1.000 0.275 MAX 0.212 0.050 Dimensions: inches Pin Function 1 +IN 2 -IN 3 +OUT 4 +OUT 5 -OUT 6 -OUT Notes: 1. For +OUT and -OUT functions, both pins must be used to meet the rated current. 2. ESD symbol (∆) indicates pin 1. Figure 3. Case Outline Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 www.micropac.com E-MAIL: [email protected] 05/16/01