53124 RADIATION TOLERANT, ± 90V - 0.8A POWER MOSFET OPTOCOUPLER Features: Applications: • • • • • • • • • • • • • • • • • • • Design Tested to 100 krad (Si) Total Dose Hermetically Sealed in 8-Pin Dual-In-Line Package Performance over –55°C to +125°C Compact Solid State Bi-directional Switch AC/DC Power Switching Maximum Average Current AC/DC: 0.8 A (1) DC only: 1.6 A (1) Per Derating Curves (Figure 3) AC/DC: 0.5 A DC only: 1.0 A Optically Coupled Input/Output Isolation Tested to 1500 VDC High Level of Transient Immunity 3 A Output Surge Current Shock and Vibration Resistant MIL-PRF-38534 Same foot print as HSSR7111 / Mii 53111 & Electrically Similar • • Mii HYBRID MICROELECTRONICS PRODUCTS DIVISION Satellite/Space systems Military/High Reliability Systems Standard 28 VDC and 48 VDC Load Driver Standard 24 VAC Load Driver Aircraft Controls AC/DC Electromechanical and Solid State Relay Replacement I/O Modules Switching Heaters DESCRIPTION The 53124 is a single channel power MOSFET optocoupler which is suitable as a pin for pin replacement for the Mii 53111 when radiation tolerant performance and similar electrical performance to the 53111 is required. The primary difference between the 53124 and 53111 is that the radiation tolerant power MOSFETs employed in the 53124 exhibit a higher RDS(ON). The higher values of RDS(ON) results in a lower current for the same power dissipation or higher power dissipation for the same current levels relative to the 53111. The popular eight pin, hermetic dual-in-line ceramic package combined with 1500 VDC isolation between input and output, makes this optocoupler ideal for solid-state relay applications. Performance is specified over the full military temperature range. This device is available as COTS, or as fully compliant MIL-PRF-38534 Class H or with custom screening. Lead options support both through-hole and surface-mount assembly. Gold plated leads are standard, but other lead finishes per MIL-PRF-38534 are also available. Functionally, the device operates as a single-pole, normally open (1 Form A) solid-state relay. The device is actuated by an input current, which can be supplied from standard logic types such as open-collector TTL. The input current biases a light emitting diode that is optically coupled to an integrated photovoltaic diode array. The photovoltaic array powers control circuitry that operates the output MOSFETs. Optimum switching of either AC or DC loads is provided by a configurable output. For AC loads, Connection A in Figure 1 must be used. Connection A will also switch DC loads but Connection B, in Figure 1, provides DC-only operation with the advantages of substantial reduction in on-resistance and twice the output current capability as that obtained with Connection A. Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 www.micropac.com E-MAIL: [email protected] 02/15/01 53124 Radiation Tolerant Power MOSFET Optocoupler ___________________________________________________________________________________________ ABSOLUTE MAXIMUM RATINGS: Storage Temperature Range ..……………………………………………………….........……............... -65°C to +150°C Operating Ambient Temperature - TA ...................…………………………………………..….…..….. -55°C to +125°C Junction Temperature - TJ ..............................……………………………………………...…….......….........…. +150°C Operating Case Temperature - Tc .....................………………………………………...……….……............ +145°C (2) Lead Solder Temperature for 10 seconds .......................………………………………………....…….............. +260°C (1.6 mm below seating plane) Average Input Current - IF ....................…...……………………………………………..……..........…............... 20 mA Peak Repetitive Input Current - IFpk .............…………………………………...…………………........…............. 40 mA (Pulse width < 100 ms; duty cycle < 50%) Peak Surge Input Current - IFpk surge .............……………………………………………………….................. 100 mA (Pulse width < 0.2 ms; duty cycle < 0.1%) Reverse Input Voltage - VR ................................…………………………..……………………………..................... 5 V Average Output Current Connection A - IO ........................…………………………..…………………..……….................................... 0.8 A (1) Connection B - IO ..............................................………..………………………..……………………............ 1.6 A (1) Average Output Current, derated per Figure 3 Connection A - IO .......................................…………………………………………..……………..................... 0.5 A Connection B - IO ........................................……………………………………………………..….................... 1.0 A Single Shot Output Current - Figure 4 Connection A - IOpk surge (Pulse width < 10 ms) ........………………………………………..…...…………...... 3 A Connection B - IOpk surge (Pulse width < 10 ms) .........………………………………………..………………..... 6 A Output Voltage Connection A - VO .........................……………………………………………………..……..…......... –90 V to +90 V Connection B - VO ............................…...……………………………………………………….............. 0 V to +90 V Average Output Power Dissipation - Figure 5 ........………………………………………….…………….... 800 mW (3) RECOMMENDED OPERATING CONDITIONS: Parameter Symbol Min. Max. Units Input Current (ON) IF (ON) 5 20 mA Input Voltage (OFF) VF (OFF) 0 0.6 VDC Operating Temperature TA -55 +125 °C Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 www.micropac.com E-MAIL: [email protected] 02/15/01 53124 Radiation Tolerant Power MOSFET Optocoupler ___________________________________________________________________________________________ ELECTRICAL SPECIFICATIONS (Pre-Irradiation) TA = -55°C to +125°C, unless otherwise specified. Parameter Output Withstand Voltage Symbol Min. Typ.* VO(OFF) 90 110 0.8 Output On-Resistance (Connection A) Max. Unit s V 2.5 Ω R(ON) Output On-Resistance (Connection B) Output Leakage Current IO (OFF) Test Conditions VF = 0.6 V IO = 10 µA IF = 10 mA IO = 500 mA (pulse duration ≤ 30 ms) 0.2 0.7 Ω IF = 10 mA IO = 1 A (pulse duration ≤ 30 ms) 10-4 10 µA VF = 0.6 V VO = 90 V 1.24 1.7 V IF = 10 mA V IF = 10 µA Input Forward Voltage VF 1.0 Input Reverse Breakdown Voltage VR 5 Input-Output Insulation II-O Turn-On Time tON Turn-Off time tOFF Output Transient Rejection dVO dt 1000 V/µs Input-Output Transient Rejection dVI-O dt 500 V/µs 1.25 1 µA 6 ms 0.25 ms Notes RH ≤ 45%, t = 5 s VI-O = 1500 VDC TA = 25°C IF = 10 mA VDD = 28 V IO = 800 mA I F = 10 mA VDD = 28 V IO = 800 mA VPEAK = 50 V CM = 1000 pF CL = 15 pF RM ≥ 1 MΩ VDD = 5 V VI-O (PEAK) = 50 V RL = 20 kΩ CL = 15 pF * All typical values are at TA = 25°C, IF (ON) = 10 mA, VF (OFF) = 0.6 V unless otherwise specified. Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 www.micropac.com E-MAIL: [email protected] 02/15/01 4, Figure 1 5, 6 Figure 6 Figure 6 Figure 7 Figure 8 53124 Radiation Tolerant Power MOSFET Optocoupler ___________________________________________________________________________________________ TYPICAL CHARACTERISTICS - (Pre-Irradiation) All typical values are at TA = 25°C, IF (ON) = 10 mA, VF (OFF) = 0.6 V unless otherwise specified. Parameter Symbol Output Off-Capacitance CO (OFF) Output Offset Voltage Input Diode Temperature Coefficient VOS ∆VF /∆TA Input Capacitance CIN Input-Output Capacitance CI-O Input-Output Resistance RI-O Test Conditions VO = 28 V f = 1 MHz IF = 10 mA IO = 0 mA IF = 10 mA VF = 0 V f = 1 MHz VI-O = 0 V f = 1 MHz VI-O = 500 V t = 60 s Typical Value Units Notes 145 pF 2 µV -1.4 mV/°C 20 pF 8 1.5 pF 5 1013 Ω 5 7 Notes: 1. Maximum average current rating where the case temperature (TC) is maintained below 120°C. 2. Maximum junction to case thermal resistance for the device is 15°C/W, where case temperature (TC) is measured at the center of the package bottom. 3. For rating, see Figure 5. The output power PD rating curve is obtained when the part is handling the maximum average output current IO as shown in Figure 3. 4. During the pulsed RON measurement (IO duration < 30 ms), ambient (TA) and case temperature (TC) are equal. 5. Pins 2 through 3 shorted together and pins 5 through 8 shorted together. 6. This is a momentary withstand test, not an operating condition. 7. VOS is a function of IF and is defined between pins 5 and 8, with pin 5 as the reference. VOS must be measured in a stable ambient (free of temperature gradients). 8. Zero-bias capacitance measured between the LED anode and cathode. CAUTION: Care should be taken not to exceed the maximum output power dissipation, maximum case temperature, and maximum junction temperature when repetitively switching loads. Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 www.micropac.com E-MAIL: [email protected] 02/15/01 53124 Radiation Tolerant Power MOSFET Optocoupler ___________________________________________________________________________________________ Case outlines A, B, and C Terminal number Terminal symbol Connection A (AC or DC load) Conneciton B (DC load only) NC V F+ V FNC V O+ NC N OV O+ NC V F+ V FNC VONC NC VO+ 1 2 3 4 5 6 7 8 NC = No connection CONNECTION A AC/DC CONNECTION CONNECTION B DC CONNECTION IO IO 1 IF + VF - 2 8 7 + VO 3 6 4 5 1 IF + VF - - 8 2 7 3 6 4 5 Figure 1 - Terminal Connections INPUT OFF ON OUTPUT OFF ON Figure 2 - Truth Table Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 www.micropac.com E-MAIL: [email protected] 02/15/01 + VO - I OPK- SURGE - OUTPUT CURRENT - A 53124 Radiation Tolerant Power MOSFET Optocoupler ___________________________________________________________________________________________ 0.6 I O - OUTPUT CURRENT- A 0.5 0.4 0.3 0.2 0.1 0 -55 CONNECTION - A IF ≥10 mA __ θCA= 40°C/W - - θCA= 80°C/W -25 -5 35 65 95 7 IF ≥10 mA 6 CONNECTION - B 5 4 CONNECTION - A 3 2 1 10 125 155 TA - AMBIENT TEMPERATURE - °C 100 1000 PULSE DURATION - ms Figure 3. Maximum Average Output Current Rating vs. Ambient Temperature. Figure 4. Single Shot (nonrepetitive) Output Current vs. Pulse Duration. 1.0 P D - OUTPUT POWER DISSIPATION - W 0.8 0.6 0.4 0.2 0 -55 CONNECTION - A IF ≥10 mA __ θCA= 40°C/W - - θCA= 80°C/W -25 5 35 65 95 125 155 TA - AMBIENT TEMPERATURE - °C Figure 5. Output Power Rating vs. Ambient Temperature. Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 www.micropac.com E-MAIL: [email protected] 02/15/01 53124 Radiation Tolerant Power MOSFET Optocoupler ___________________________________________________________________________________________ V DD PULSE GEN (SEE NOTE 1) RL 1 8 2 7 3 6 4 5 VO MONITOR NODE IF + VF IF MONITOR C L = 25 pF (SEE NOTE 2) RM 200 GND GND 50% 50% IF PULSE = 15 ms WIDTH VO 90% 10% t ON t OFF NOTES: 1. PULSE GENERATOR HAS THE FOLLOWING CHARACTERISTICS: OUTPUT IMPEDANCE = 50 AND t r = t f = 5.0 ns. 2. LOAD CAPACITANCE (C L) INCLUDES PROBE AND JIG CAPACITANCE. Figure 6. Switching Test Circuit and Waveform. Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 www.micropac.com E-MAIL: [email protected] 02/15/01 53124 Radiation Tolerant Power MOSFET Optocoupler ___________________________________________________________________________________________ V 1 8 2 7 3 6 4 5 MONITOR NODE IF INPUT OPEN + M RM CM VF - VO(PEAK) + PULSE GENERATOR 90% 90% VO(PEAK) 10% 10% tr tf VM (MAX) < 5V d VO dt = (0.8) V O (PEAK) tr OR (0.8) VO (PEAK) tf OVERSHOOT ON V O (PEAK) IS TO BE < 10% NOTES: 1. C M INCLUDES PROBE AND FIXTURE CAPACITANCE. 2. R M INCLUDES PROBE AND FIXTURE RESISTANCE. Figure 7. Output Transient Rejection Test Circuit and Waveform. Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 www.micropac.com E-MAIL: [email protected] 02/15/01 53124 Radiation Tolerant Power MOSFET Optocoupler ___________________________________________________________________________________________ V DD RL 1 8 2 7 VO IF + CL VF - S1 3 6 4 5 A B VIN V I-0 (PEAK) - + PULSE GENERATOR 90% 90% V I-0 (PEAK) 10% 10% tr tf VO (OFF) VO (OFF) (MIN) > 3.25 V S 1 AT A (VF = 0 V) VO (ON) (MAX) < 0.8 V V O (ON) S 1 AT B (IF = 10 mA) dV I-0 dt = (0.8) V I-0 (PEAK) OR (0.8) V I-0 (PEAK) tr tf OVERSHOOT ON V I-0 (PEAK) IS TO BE < 10% NOTES: 1. LOAD CAPACITANCE (C L )INCLUDES PROBE AND FIXTURE CAPACITANCE. Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 www.micropac.com E-MAIL: [email protected] 02/15/01 53124 Radiation Tolerant Power MOSFET Optocoupler ___________________________________________________________________________________________ TOTAL DOSE TEST RESULTS Disclaimer: The data of 4 representative units irradiated in Cobalt-60 chamber is only typical of one lot of solid state relays. Micropac does not guarantee performance of its SSR to these radiation levels. Individual lots have to be screened to guarantee the performance. 1.5 Rise Time, ms Turn-On Time, ms 3.0 2.5 2.0 1.5 1.0 0.5 0 50 100 0 50 Total Dose, krad (Si) 100 Total Dose, krad (Si) Figure 9. Turn-On Time vs Total Dose at Vout = 28 V, Rload = 35 Ω, Iin = 15 mA, 10% duty cycle. Figure 10. Rise Time vs Total Dose at Vout = 28 V, Rload = 35 Ω, Iin = 15 mA, 10% duty cycle. Turn-Off Time, µ s 90 80 70 60 50 0 50 100 Total Dose, krad (Si) Figure 11. Turn-Off Time vs Total Dose at Vout = 28 V, Rload = 35 Ω, Iin = 15 mA, 10% duty cycle. Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 www.micropac.com E-MAIL: [email protected] 02/15/01 53124 Radiation Tolerant Power MOSFET Optocoupler ___________________________________________________________________________________________ 0.20 On-Resistance "B", ohm On-Resistance "A", ohm 0.80 0.75 0.70 0.19 0.18 0 50 100 0 Total Dose, krad (Si) 4 3 2 1 0 50 100 Figure 13. On-Resistance "B" vs Total Dose at IF =10 mA, Iout = 40 mA for 1second. Output Leakage Current "B", nA Output Leakage Current "A", nA Figure 12. On-Resistance "A" vs Total Dose at IF =10 mA, Iout = 40 mA for 1second. 0 50 Total Dose, krad (Si) 100 Total Dose, krad (Si) Figure 14. Output Leakage Current "A" vs Total Dose at VF = 1.0 V, Vout = 90 V. 8 6 4 2 0 0 50 100 Total Dose, krad (Si) Figure 15. Output Leakage Current "B" vs Total Dose at VF = 1.0 V, Vout = 90 V. Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 www.micropac.com E-MAIL: [email protected] 02/15/01 1.40 Input Reverse Voltage, VDC Input Forward Voltage, VDC 53124 Radiation Tolerant Power MOSFET Optocoupler ___________________________________________________________________________________________ 1.35 1.30 0 50 100 Total Dose, krad (Si) Figure 16. Input Forward Voltage vs Total Dose at IF =15 mA. 60 40 20 0 0 50 100 Total Dose, krad (Si) Figure 17. Input Reverse Voltage vs Total Dose at IR = 10 µA. Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 www.micropac.com E-MAIL: [email protected] 02/15/01 53124 Radiation Tolerant Power MOSFET Optocoupler ___________________________________________________________________________________________ Case Outlines A -101 CASE OUTLINE 31757 USA ESD SYMBOL .310 (7.87) .290 (7.37) .320 (8.13) MAX. 53124 Q XXXXX PIN 1 .050 (1.27) .035 (0.89) .390 (9.91) .370 (9.41) .110 (2.79) .090 (2.29) .050 (1.27) .035 (0.89) .170 (4.32) MAX. .020 (0.51) MAX. .390 (9.91) .370 (9.41) B -102 CASE OUTLINE .170 (4.32) MAX. .390 (9.91) .380 (7.87) .020 (.051) MAX. C -103 CASE OUTLINE .390 (9.91) .370 (9.41) .170 (4.32) MAX. SEATING PLANE .320 (8.13) MAX .013 (0.33) .007 (0.18) .110 (2.79) .090 (2.29) SEATING PLANE .180 (4.57) MAX .047 (1.19) TYP .110 (2.79) .090 (2.29) .050 (1.27) .035 (0.89) .320 (8.13) MAX .020 (0.51) MAX. .310 (7.87) .290 (7.37) NOTES: 1. PIN 1 IS INDICATED BY THE ESD TRIANGLE MARKED ON THE LID OF THE PACKAGE. 2. DIMENSIONS ARE IN INCHES, (mm). 3. METRIC EQUIVALENTS ARE GIVEN FOR GENERAL INFORMATION ONLY. 4. UNLESS OTHERWISE SPECIFIED, TOLERANCE IS ±.005 (0.13mm). Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 www.micropac.com E-MAIL: [email protected] 02/15/01