PD Type 2- channel (Form A) Type 8.8±0.2 .346±.008 3.9±0.2 .154±.008 19.46±0.2 .766±.008 8.8±0.2 .346±.008 3.7±0.2 .146±.008 19.46±0.2 .766±.008 mm inch 1 8 2 7 3 6 4 5 PhotoMOS RELAYS FEATURES TYPICAL APPLICATIONS 1. Flat-Packaged Type (W) 8.8× (D) 19.46× (H) 3.9mm (W) .346× (D) .766× (H) .154inch 2. High capacity Supports the various types of load control, from very small loads to a maximum 1.8A at the rated load voltage 60V (AQW272) 3. High sensitivity • Low ON resistance A maximum 1.8A load can be controlled with a 5mA input current. The ON resistance is low at 0.11Ω (typ.) (AQW272) • Measuring and Testing equipment • IC Testers and Board Testers • High speed inspection machines • Railroad, traffic signals TYPES Output rating* Type Part No. Through hole terminal Load voltage Tape and reel packing style Picked from the Picked from the 1/2/3/4-pin side 5/6/7/8-pin side AQW272AX AQW272AZ AQW275AX AQW275AZ AQW277AX AQW277AZ AQW274AX AQW274AZ Load current Tube packing style AC/DC 60V 100V 200V 400V 1.8A 1.1A 0.55A 0.3A AQW272 AQW275 AQW277 AQW274 Packing quantity Surface-mount terminal AQW272A AQW275A AQW277A AQW274A Tube Tape and reel 1 tube contains 25 pcs. 1 batch contains 250 pcs. 1,000 pcs. * Indicate the peak AC and DC values. Note: For space reasons, the SMD terminal shape indicator "A" and the package type indicator "X" and "Z" are omitted from the seal. RATING 1. Absolute maximum ratings (Ambient temperature: 25°C 77°F) Item LED forward current LED reverse voltage Input Peak forward current Power dissipation Load voltage (peak AC) Continuous load current (Peak AC) Output Peak load current Power dissipation Total power dissipation I/O isolation voltage Temperture limits 196 Symbol AQW272(A) IF VR IFP Pin VL 60 V 1.8 A IL (2.5 A) Ipeak 6.0 A Pout PT Viso AQW275(A) AQW277(A) 50 mA 3V 1A 75 mW 100 V 200 V 1.1 A 0.55 A (1.5 A) (0.7 A) 4.0 A 2.0 A 1,100 mW 1,100 mW 2,500 V AC AQW274(A) Operating Topr –40°C to +85°C –40°F to +185°F Storage Tstg –40°C to +100°C –40°F to +212°F Remarks f = 100 Hz, Duty factor = 0.1% 400 V 0.3 A (0.4 A) 1.0 A Peak AC, DC ( ): in case of using only 1 channel 100ms (1 shot), VL = DC Non-condensing at low temperatures AQW27❍ 2. Electrical characteristics (Ambient temperature: 25°C 77°F) Item Symbol AQW272(A) Typical Maximum Minimum Typical Typical Maximum LED operate current Input LED turn off current LED dropout voltage IFon IFoff VF Typical On resistance Ron Maximum Output Off state leakage current Maximum 0.11 Ω 0.18 Ω ILeak Typical AQW275(A) AQW277(A) AQW274(A) Condition 1.0 mA IL = 100 mA VL = 10 V 3.0 mA 0.4 mA IL = 100 mA VL = 10 V 0.9 mA 1.16 V (1.25 V at IF = 50 mA) IF = 10 mA 1.5 V IF = 10 mA 0.23 Ω 0.7 Ω 2.1 Ω IL = Max. 0.34 Ω 1.1 Ω 3.2 Ω Within 1 s on time IF = 0 10 µA VL = Max. 2.46 ms 2.40 ms 5.64 ms 5.65 ms Maximum 1.65 ms IF = 10 mA IL = 100 mA VL = 10 V 3.88 ms IF = 5 mA IL = 100 mA VL = 10 V 0.08 ms IF = 5 mA or 10 mA IL = 100 mA VL = 10 V 5.0 ms Turn on time* Ton Typical Maximum 2.57 ms 10.0 ms Typical Transfer characteristics 1.12 ms 0.22 ms Turn off time* 0.21 ms 0.10 ms Toff Maximum 3.0 ms Initial I/O isolation resistance Typical Maximum Minimum Riso 0.8 pF 1.5 pF 1,000 MΩ Maximum operating speed Maximum — 0.5 cps I/O capacitance Ciso f = 1 MHz VB = 0 500 V DC IF = 10 mA Duty factor = 50% IL = Max. , VL = Max. Note: Recommendable LED forward current IF = 5 to 10 mA. For type of connection, see page 32. *Turn on/Turn off time Input 90% Output 10% Toff Ton ■ For Dimensions, see Page 29. ■ For Schematic and Wiring Diagrams, see Page 32. ■ For Cautions for Use, see Page 36. REFERENCE DATA 1. Load current vs. ambient temperature characteristics 2.-(1) On resistance vs. ambient temperature characteristics 2.-(2) On resistance vs. ambient temperature characteristics Allowable ambient temperature: –40°C to +85°C –40°F to +185°F LED current: 10 mA; Continuous load current: 1.8 A (DC) (AQW272), 1.1 A (DC) (AQW275) LED current: 10 mA; Continuous load current: 0.55 A (DC) (AQW277), 0.3 A (DC) (AQW274) 3.0 AQW272 1.5 AQW275 0.4 AQW275 0.3 0.2 On resistance, Ω On resistance, Ω Load current, A 2.5 2.0 5.0 0.5 4.0 AQW274 3.0 2.0 AQW272 1.0 AQW277 AQW277 1.0 0.1 0.5 AQW274 0 –40 –20 0 20 40 60 8085 Ambient temperature, °C 0 –40 –20 8085 0 20 40 60 Ambient temperature, °C 0 –40 –20 0 0 8085 20 40 60 Ambient temperature, °C 197 AQW27❍ 4. Turn off time vs. ambient temperature characteristics 5. LED operate current vs. ambient temperature characteristics LED current: 10 mA; Load voltage: 10 V (DC); Continuous load current: 100 mA (DC) LED current: 10 mA; Load voltage: 10 V (DC); Continuous load current: 100 mA (DC) Load voltage: 10 V (DC); Continuous load current: 100 mA (DC) 1.0 8 0.8 6 AQW272 4 5 LED operate current, mA 10 Turn off time, ms Turn on time, ms 3. Turn on time vs. ambient temperature characteristics 0.6 0.4 AQW275 3 AQW274 AQW272 AQW277 2 AQW275 AQW274 2 4 AQW277 0.2 AQW277 1 AQW275 AQW272 AQW274 0 –40 –20 0 0 20 40 60 8085 Ambient temperature, °C –40 –20 0 0 20 40 60 8085 Ambient temperature, °C –40 –20 0 20 40 60 8085 Ambient temperature, °C 6. LED turn off current vs. ambient temperature characteristics 7. LED dropout voltage vs. ambient temperature characteristics 8. Voltage vs. current characteristics of output at MOS portion Load voltage: 10 V (DC); Continuous load current: 100 mA (DC) Sample: all types; LED current: 5 to 50 mA Ambient temperature: 25°C 77°F 3 AQW272 AQW277 2 AQW274 Current, A LED dropout voltage, V LED turn off current, mA 4 1.4 1.3 0 20 40 60 AQW277 AQW274 0 0.5 1.0 1.5 2.0 –1.0 Voltage, V –2.0 –3.0 0 –40 –20 8085 AQW272 AQW275 50mA 30mA 20mA 10mA 5mA 1.1 Ambient temperature, °C 2.0 –2.0 –1.5 –1.0 –0.5 1.2 1.0 –40 –20 3.0 1.0 AQW275 1 0 4.0 1.5 5 0 –4.0 80 85 100 20 40 60 Ambient temperature, °C 9.-(1) Off state leakage current 9.-(2) Off state leakage current Ambient temperature: 25°C 77°F Ambient temperature: 25°C 77°F 10. LED forward current vs. turn on time characteristics Load voltage: 10 V (DC); Continuous load current: 100 mA (DC); Ambient temperature: 25°C 77°F 10 AQW275 18 Turn on time, ms 10–6 –9 10–3 Off state leakage current, A Off state leakage current, A 20 10–3 10–6 10 –9 AQW274 AQW272 0 12 10 AQW272 AQW275 8 4 0 100 Load voltage, V AQW274 AQW277 2 10–12 50 14 6 AQW277 10–12 16 50 Load voltage, V 0 100 0 10 20 30 40 50 LED forward current, mA 12.-(1) Load voltage vs. turn on time characteristics 12.-(2) Load voltage vs. turn on time characteristics Load voltage: 10 V (DC); Continuous load current: 100 mA (DC); Ambient temperature: 25°C 77°F LED current: 10 mA; Continuous load current: 100 mA; Ambient temperature: 25°C 77°F LED current: 10 mA; Continuous load current: 100 mA; Ambient temperature: 25°C 77°F 5 5 0.4 4 4 0.3 AQW275 0.2 AQW277 AQW272 AQW274 0.1 0 198 3 AQW272 2 10 20 30 40 50 LED forward current, mA 3 2 AQW274 AQW275 1 1 0 Turn on time, ms 0.5 Turn on time, ms Turn off time, ms 11. LED forward current vs. turn off time characteristics 0 AQW277 0 10 20 30 40 50 60 70 80 90 100 Load voltage, V 0 0 50 100 150 200 250 300 350 400 Load voltage, V AQW27❍ 13.-(2) Load current vs. turn on time characteristics 14.-(1) Load voltage vs. turn off time characteristics LED current: 10 mA; Continuous load current: 10 V (DC); Ambient temperature: 25°C 77°F LED current: 10 mA; Load voltage 10 V (DC); Ambient temperature: 25°C 77°F LED current: 10 mA; Continuous load current: 100 mA; Ambient temperature: 25°C 77°F 5 0.5 4 4 0.4 AQW275 3 AQW272 2 Turn off time, ms 5 Turn on time, ms Turn on time, ms 13.-(1) Load current vs. turn on time characteristics 3 AQW274 2 0.3 AQW272 0.2 AQW275 AQW277 1 0 0.1 1 0 0.5 1 1.5 2 2.5 Load current, A 0 3 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 Load current, A 0 10 20 30 40 50 60 70 80 90 100 Load voltage, V 15.-(1) Load current vs. turn off time characteristics 15.-(2) Load current vs. turn off time characteristics LED current: 10 mA; Continuous load current: 100 mA; Ambient temperature: 25°C 77°F LED current: 10 mA; Load voltage 10 V (DC); Ambient temperature: 25°C 77°F LED current: 10 mA; Load voltage 10 V (DC); Ambient temperature: 25°C 77°F 0.5 0.5 0.4 0.4 0.4 0.3 0.2 Turn off time, ms 0.5 Turn off time, ms Turn off time, ms 14.-(2) Load voltage vs. turn off time characteristics 0.3 AQW272 0.2 0.3 0.2 AQW275 AQW277 0.1 0.1 0 0 AQW274 0 50 100 150 200 250 300 350 400 Load voltage, V 0 0.5 1.0 1.5 2.0 2.5 3.0 Load current, A 17. Applied voltage vs. output capacitance characteristics LED current: 10 mA; Ambient temperature: 25°C 77°F Frequency: 1 MHz; Ambient temperature: 25°C 77°F 9 Duty factor=50% 8 7 6 5 4 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 Load current, A 1800 1600 1400 1200 1000 800 3 600 2 400 1 200 0 25 50 75 100 125 150 175 200 Load voltage, V × load current, A 5/7/2001 0 2000 10 Output capacitance, pF Maximum operating frequency, time/s 16. Maximum operating frequency vs. load voltage/current characteristics 0 AQW277 0.1 AQW274 0 AQW272 AQW275 AQW277 0 20 40 AQW274 60 80 100 Applied voltage, V All Rights Reserved, © Copyright Matsushita Electric Works, 199 Ltd. Go To Online Catalog