AQW61❍EH TESTING PhotoMOS RELAYS GU (General Use)-E Type 2-Channel (Form A Form B) Type FEATURES 6.4 .252 3.2 .126 9.86 .388 6.4 .252 9.86 .388 2.9 .114 mm inch 1 8 N.C. 2 7 3 6 4 5 N.O. 5. High sensitivity, high speed response. Can control a maximum 0.14 A load current with a 5 mA input current. Fast operation speed of 0.5ms (typ.) [N.O.].(AQW610EH) 6. Low-level off state leakage current 1. Reinforced insulation 5,000 V type More than 0.4 mm internal insulation distance between inputs and outputs. Conforms to EN41003, EN60950 (reinforced insulation). 2. Compact 8-pin DIP size The device comes in a compact (W) 6.4×(L)9.86×(H)3.2 mm (W).252×(L).388×(H).126 inch, 8-pin DIP size (through hole terminal type). 3. Applicable for 1 Form A 1 Form B use as well as two independent 1 Form A and 1 Form B use 4. Controls low-level analog signals PhotoMOS relays feature extremely low closed-circuit offset voltage to enable control of low-level analog signals without distortion. TYPICAL APPLICATIONS • Modem • Telephone equipment • Security equipment • Sensors TYPES Part No. Output rating* Type AC/DC type Through hole terminal I/O isolation voltage Reinforced 5,000 V Packing quantity Surface-mount terminal Tape and reel packing style Picked from the Picked from the 1/2/3/4-pin side 5/6/7/8-pin side Load voltage Load current 350 V 120 mA AQW610EH AQW610EHA AQW610EHAX AQW610EHAZ 400 V 100 mA AQW614EH AQW614EHA AQW614EHAX AQW614EHAZ Tube packing style Tube Tape and reel 1 tube contains 40 pcs. 1 batch contains 400 pcs. 1,000 pcs. *Indicate the peak AC and DC values. Note: For space reasons, the SMD terminal shape indicator "A" and the package type indicator "X" and "Z" are omitted from the seal. RATING 1. Absolute maximum ratings (Ambient temperature: 25°C 77°F) Input Output Item LED forward current LED reverse voltage Peak forward current Power dissipation Load voltage (peak AC) Symbol IF VR IFP Pin VL AQW610EH (A) 350 V 400 V Continuous load current IL 0.12 A (0.13 A) 0.1 A (0.13 A) Ipeak Pout PT Viso Topr 0.36 A Peak load current Power dissipation Total power dissipation I/O isolation voltage Operating Temperature limits Storage Tstg AQW614EH (A) 50 mA 3V 1A 75 mW Remarks f = 100 Hz, Duty factor = 0.1% 0.3 A 800 mW 850 mW 5,000 V AC –40°C to +85°C –40°F to +185°F –40°C to +100°C –40°F to +212°F Peak AC, DC ( ): in case of using only 1a or 1b, 1 channel 100 ms (1 shot), VL= DC Non-condensing at low temperatures 131 AQW61❍EH 2. Electrical characteristics (Ambient temperature: 25°C 77°F) Item Symbol LED operate current LED reverse current Input LED dropout voltage Typical Maximum Minimum Typical Typical Maximum AQW610EH (A) AQW614EH (A) 1.3 mA 3.0 mA 0.4 mA 1.2 mA 1.14 (1.25 V at IF = 50 mA) 1.5 V IFon(N.O.) IFoff(N.C.) IFoff(N.O.) IFon(N.C.) VF Typical On resistance Ron Maximum Output Off state leakage current Maximum I/O capacitance 35Ω 0.5 ms (N.O.) 1.0 ms (N.C.) Ciso Minimum IL=Max. IF=5 mA IF=5mA (N.O.) IF = 0mA (N.C.) IL = Max. Within 1 s on time IF=0 mA (N.O.) IF = 5 mA (N.C.) VL = Max. 0.5 ms (N.O.) 0.8 ms (N.C.) IF = 0 mA-->5 mA IL = Max. 3.0 ms 0.08ms (N.O.) 0.2ms (N.C.) 1.0ms 0.8 pF Toff(N.O.) Ton(N.C.) Maximum Initial I/O isolation resistance 25Ω IL=Max. 1µA (N.O.) 10µA (N.C.) Ton(N.O.) Toff(N.C.) Maximum Typical Maximum Typical Reverse (ON) Transfer char- time* acteristics 26Ω ILeak Typical Operate (OFF) time* 18Ω Condition Riso IF = 5 mA-->0 mA IL = Max. 1.5 pF f = 1MHz VB = 0 1,000MΩ 500 V DC Note: Recommendable LED forward current IF = 5 to 10 mA. For type of connection, see page 32. *Operate/Reverse time 1) N.O. 2) N.C. Input Input 90% Output 10% Ton Output 10% 90% Toff Toff Ton ■ For Dimensions, see Page 27. ■ For Schematic and Wiring Diagrams, see Page 32. ■ For Cautions for Use, see Page 36. REFERENCE DATA 1. Load current vs. ambient temperature characteristics 2. On resistance vs. ambient temperature characteristics 3. Operate time vs. ambient temperature characteristics Allowable ambient temperature: –40°C to +85°C –40°F to +185°F Measured portion: between terminals 5 and 6, 7 and 8; LED current: 5 mA; Load voltage; Max. (DC) Continuous load current: Max. (DC) LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) 50 3 Between terminal 5 and 6 (N.O.) Between terminal 7 and 8 (N.C.) AQW610EH 150 AQW614EH 100 Using 2 channels 40 AQW614EH 30 20 AQW610EH Operate (OFF) time, ms Using only 1 channel On resistance, Ω Load current, mA 200 Between terminal 5 and 6 (N.O.) Between terminal 7 and 8 (N.C.) 2.5 2 1.5 1 50 10 0 –40 –20 0 20 40 60 8085 Ambient temperature, °C 132 0 0.5 –40 –20 0 20 40 60 8085 Ambient temperature, °C 0 –40 –20 0 20 40 60 80 85 Ambient temperature, °C AQW61❍EH 4. Reverse time vs. ambient temperature characteristics 5. LED operate current vs. ambient temperature characteristics 6. LED reverse current vs. ambient temperature characteristics LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) Load voltage: Max. (DC); Continuous load current: Max. (DC) Load voltage: Max. (DC); Continuous load current: Max. (DC) 5 Between terminal 5 and 6 (N.O.) Between terminal 7 and 8 (N.C.) 0.6 AQW610EH 0.4 0.2 0 5 Between terminal 5 and 6 (N.O.) Between terminal 7 and 8 (N.C.) LED reverse (NO) current, mA LED operate (OFF) current, mA Reverse (ON) time, ms 0.8 4 3 2 3 2 AQW614EH 0 20 –40 –20 40 60 1 0 8085 –40 –20 0 20 40 60 LED current: 5 to 50 mA Measured portion: between terminals 5 and 6, 7 and 8; Ambient temperature: 25°C 77°F 1.4 1.3 1.2 0 AQW614EH 1 –20 –40 –60 –80 –100 –120 –140 50mA 30mA 20mA 10mA 5mA 20 40 60 80 85 Ambient temperature, °C 0 20 40 60 80 85 Measured portion: between terminals 5 and 6, 7 and 8; Ambient temperature: 25°C 77°F AQW610EH 140 Between terminals 120 5 and 6(N.O.) 100 Between terminals 80 7 and 8(N.C.) 60 40 20 –5 –4 –3 –2 –1 –40 –20 –20 9. Off state leakage current Off state leakage current, A 1.5 1.0 –40 Ambient temperature, °C 8. Voltage vs. current characteristics of output at MOS portion 1.1 0 80 85 Ambient temperature, °C 7. LED dropout voltage vs. ambient temperature characteristics LED dropout voltage, V 4 1 Ambient temperature, °C 0 Between terminal 5 and 6 (N.O.) Between terminal 7 and 8 (N.C.) 3 2 4 5 10 10 10 10 Between terminal 5 and 6 (N.O.) Between terminal 7 and 8 (N.C.) –3 –6 AQW614EH –9 AQW610EH –12 0 20 40 80 60 Load voltage, V 100 10. LED forward current vs. operate time characteristics 11. LED forward current vs. reverse (ON) time characteristics 12. Applied voltage vs. output capacitance characteristics Measured portion: between terminals 5 and 6, 7 and 8; Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25°C 77°F Measured portion: between terminals 5 and 6, 7 and 8; Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25°C 77°F Measured portion: between terminals 5 and 6, 7 and 8; Frequency: 1 MHz; Ambient temperature: 25°C 77°F 4 3 2 1 0.4 0.3 0.2 0.1 0 10 20 30 40 50 LED forward current, mA 5/7/2001 Between terminal 5 and 6 (N.O.) Between terminal 7 and 8 (N.C.) Output capacitance, pF Reverse (ON) time, ms Operate (OFF) time, ms Between terminal 5 and 6 (N.O.) Between terminal 7 and 8 (N.C.) 0 120 0.5 5 60 0 Between terminal 5 and 6 (N.O.) Between terminal 7 and 8 (N.C.) 100 80 60 40 20 0 10 20 30 40 50 LED forward current, mA 60 0 0 10 20 30 40 50 60 Applied voltage, V All Rights Reserved, © Copyright Matsushita Electric Works, 133 Ltd. Go To Online Catalog