TESTING GU (General Use) Type SOP Series [2-Channel (Form A Form B) Type] PhotoMOS RELAYS FEATURES 1. 2 channels in super miniature design The device comes in a super-miniature SO package measuring (W) 4.4 × (L) 9.37 × (H) 2.1 mm (W) .173× (L) .369× (H) .083 inch —approx. 38% of the volume and 66% of the footprint size of DIP type PhotoMOS Relays. 4.4 .173 2.1 .083 9.37 .369 mm inch (DIP) (SOP) Applicable for 1 Form A 1 Form B use as well as two independent 1 Form A and 1 Form B use Controls low-level analog signals PhotoMOS relays feature extremely low closed-circuit offset voltage to enable control of low-level analog signals without distortion 5. Low-level off state leakage current Approx. 38% 1 N.C. 2 7 3 6 4 Volume 8 Approx. 66% 5 Footprint N.O. TYPICAL APPLICATIONS 2. Tape and reel The device comes standard in a tape and reel (1,000 pcs./reel) to facilitate automatic insertion machines. • Telephones • Measuring instruments • Computer • Industrial robots • High-speed inspection machines. TYPES 1. AC/DC type Output rating* Load voltage Load current 350 V 100 mA Part No. Picked from the 1/2/3/4-pin side Picked from the 5/6/7/8-pin side AQW610SX AQW610SZ Packing quantity in tape and reel 1,000 pcs. *Indicate the peak AC and DC values. Notes: (1) Tape package is the standard packing style. Also available in tube. (Part No. suffix "X" or "Z" is not needed when ordering; Tube: 50 pcs.; Case: 1,000 pcs.) (2) For space reasons, the package type indicator "X" and "Z" are omitted from the seal. RATING 1. AC/DC type 1. Absolute maximum ratings (Ambient temperature : 25°C 77°F) Input Output Item LED forward current LED reverse voltage Peak forward current Power dissipation Load voltage (peak AC) Symbol IF VR IFP Pin VL AQW610S 50 mA 3V 1A 75 mW 350 V Continuous load current IL 0.1 A (0.13 A) Ipeak Pout PT Viso Topr Tstg 0.3 A 600 mW 650 mW 1,500 V AC –40°C to +85°C –40°F to +185°F –40°C to +100°C –40°F to +212°F Peak load current Power dissipation Total power dissipation I/O isolation voltage Operating Temperature limits Storage Remarks f = 100 Hz, Duty factor = 0.1% Peak AC, DC ( ): in case of using only 1a or 1b, 1 channel 100 ms (1 shot), VL = DC Non-condensing at low temperatures 1 AQW610S 2. Electrical characteristics (Ambient temperature : 25°C 77°F) Item Symbol Typical Maximum Minimum Typical Typical Maximum Typical LED operate current Input LED reverse current LED dropout voltage On resistance Off state leakage current IFoff VF Maximum Typical Maximum Typical Maximum Typical Maximum Minimum Operate time* Transfer characteristics IFon Maximum Output Reverse time* I/O capacitance Initial I/O isolation resistance AQW610S 0.9 mA 3 mA 0.4 mA 0.8 mA 1.14 V (1.25 V at IF = 50 mA) 1.5 V 18 Ω Ron 25 Ω Ileak 1 µA Condition IL = Max. IL = Max. IF = 5 mA IF = 5 mA (N.O.) IF= 0 mA (N.C.) IL = Max. Within 1 s on time IF = 0 mA (N.O.) IF= 5 mA (N.C.) VL = Max. 0.28 ms (N.O.), 0.52 ms (N.C.) 1.0 ms 0.04 ms (N.O.), 0.23 ms (N.C.) 1.0 ms 0.8 pF 1.5 pF 1,000 MΩ Ton Toff Ciso Riso Note: Recommendable LED forward current IF = 5 mA. IF = 0 mA ➝ 5 mA IL = Max. IF = 5 mA ➝ 0 mA IL = Max. f = 1 MHz VB = 0 500 V DC For type of connection, see page 32. *Operate/Reverse time 1) N.O. 2) N.C. Input Input 90% Output 10% Ton Output 10% 90% Toff Toff Ton REFERENCE DATA 1. Load current vs. ambient temperature characteristics 2. On resistance vs. ambient temperature characteristics 3. Opearte time vs. ambient temperature characteristics Allowable ambient temperature: –40°C to +85°C –40°F to +185°F Measured portion: between terminals 5 and 6, 7 and 8; LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) 1.0 Between terminals 5 and 6(N.O.) Between terminals 7 and 8(N.C.) Between terminals 5 and 6(N.O.) Between terminals 7 and 8(N.C.) Using 2 channels 80 60 40 Operate time, ms 100 50 Using only 1 channel On resistance, Ω Load current, mA 130 120 30 20 0.8 0.6 0.4 40 10 0.2 20 0 –40 –20 0 20 40 60 80 85 Ambient temperature, °C 2 0 –40 –20 0 20 40 60 Ambient temperature, °C 80 85 0 –40 –20 0 20 40 60 Ambient temperature, °C 80 85 AQW610S 4. Reverse time vs. ambient temperature characteristics 5. LED operate current vs. ambient temperature characteristics 6. LED Reverse current vs. ambient temperature characteristics LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) Load voltage: Max. (DC); Continuous load current: Max. (DC) Load voltage: Max. (DC); Continuous load current: Max. (DC) 5 0.6 0.4 4 3 2 0 3 2 –40 –20 0 20 40 0 60 80 85 100 1 –40 –20 Ambient temperature, °C 0 20 40 60 LED current: 5 to 50 mA Measured portion: between terminals 5 and 6, 7 and 8; Ambient temperature: 25°C 77°F 1.5 140 Between terminals 120 5 and 6(N.O.) Between terminals 100 7 and 8(N.C.) 80 60 40 20 –3 –2.5 –2 –1.5 –1 –0.5 Current, mA 1.4 1.3 1.2 0.5 1 1.5 2 2.5 3 –20 Voltage, V –40 –60 –80 –100 –120 –140 50mA 30mA 20mA 10mA 5mA 1.0 –40 –20 –40 –20 0 20 40 60 80 85 Ambient temperature, °C 0 20 40 60 80 85 Ambient temperature, °C 8. Voltage vs. current characteristics of output at MOS portion 1.1 0 80 85 Ambient temperature, °C 7. LED dropout voltage vs. ambient temperature characteristics LED dropout voltage, V 4 1 0.2 0 Between terminals 5 and 6(N.O.) Between terminals 7 and 8(N.C.) LED reverse current, mA 0.8 5 Between terminals 5 and 6(N.O.) Between terminals 7 and 8(N.C.) 9. Off state leakage current Measured portion: between terminals 5 and 6, 7 and 8; Ambient temperature: 25°C 77°F Off state leakage current, A Reverse time, ms Between terminals 5 and 6(N.O.) Between terminals 7 and 8(N.C.) LED operate current, mA 1.0 10 –3 10 –6 10 –9 10 –12 Between terminals 5 and 6(N.O.) Between terminals 7 and 8(N.C.) 0 20 40 80 60 Load voltage, V 100 10. LED forward current vs. operate time characteristics 11. LED forward current vs. reverse time characteristics 12. Applied voltage vs. output capacitance characteristics Measured portion: between terminals 5 and 6, 7 and 8; Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25°C 77°F Measured portion: between terminals 5 and 6, 7 and 8; Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25°C 77°F Measured portion: between terminals 5 and 6, 7 and 8; Frequency: 1 MHz; Ambient temperature: 25°C 77°F 0.5 120 4 3 2 1 0 0.4 0.3 0.2 0.1 0 10 20 30 40 50 LED forward current, mA 5/7/2001 Between terminals 5 and 6(N.O.) Between terminals 7 and 8(N.C.) Reverse time, ms Operate time, ms Between terminals 5 and 6(N.O.) Between terminals 7 and 8(N.C.) 60 0 Output capacitance, pF 5 Between terminals 5 and 6(N.O.) Between terminals 7 and 8(N.C.) 100 80 60 40 20 0 10 20 30 40 50 LED forward current, mA 60 0 0 10 20 30 40 50 60 Applied voltage, V All Rights Reserved, © Copyright Matsushita Electric Works, Ltd. 77