NTE30001 Infrared Emitting Diode Bi–Directional Features: D Bi–Directional Light Emission Type D High Output: Fe = 1mW Typ at IF = 20mA Applications: D Light Source for Tape End Detector for VHS type VCR’s Absolute Maximum Ratings: (TA = +25°C unless otherwise specified) Power Dissipation, PD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75mW Forward Current, IF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50mA Peak Forward Current (Note 1), IFM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1A Reverse Voltage, VR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6V Operating Junction Temperature Range, Topr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –25°C to +85°C Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –40°C to +85°C Lead Temperature (During Soldering, Note 2), TL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +260°C Note 1. Pulse Width ≤ 100µs, Duty Ratio = 0.01 Note 2. For 3 seconds at a distance of 2.5mm from the bottom face of the resin package. Electro–Optical Characteristics: (TA = +25°C unless otherwise specified) Parameter Forward Voltage Peak Forward Voltage Symbol VF VFM Test Conditions Min Typ Max Unit IF = 20mA – 1.2 1.4 V IFM = 500mA – 3.0 4.0 V Reverse Current IR VR = 3V – – 10 µA Terminal Capacitance Ct V = 0, f = 1MHz – 50 100 pF Radiant Flux Fe IF = 20mA 0.7 1.0 2.0 mW Peak Emission Wavelength λp IF = 5mA – 950 – nm Half Intensity Wavelength ∆λ IF = 5mA – 45 – nm .070 (1.78) .157 (4.0) .049 (1.25) R (2 Places) .236 (6.0) .157 (4.0) A .039 (1.0) .669 (17.0) .708 (18.0) .019 (0.5) .100 (2.54) A K .019 (0.5) K