PI5A4599A 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 SOTINY Low Resistance, Low-Voltage Single-Supply SPDT Switch Features Description The PI5A4599A is an improved, direct replacement for the MAX4599 single-pole, double-throw (SPDT) analog switch. Improved specifications include a low maximum ON resistance of 10 ohms and fast switching times (tON = 15ns max., tOFF = 7ns max.) with 5V supply operation. With a 2.5V supply, resistance is a low 40 ohms max. Low On-Resistance: 10 ohms max. RON Matching: 2 ohms max. RON Flatness: 3.5 ohms max. Low 0.5nA Input Leakage at 25 °C 2V to 6V Single-Supply Operation Fast Switching Time - 15ns tON - 7ns tOFF Break-Before-Make Switching Guaranteed 5pC max Charge Injection 225MHz Channel Bandwidth 76dB Off-Isolation at 1MHz TTL/CMOS Logic Compatible Low Power Consumption: 5µW Improved Direct Replacement for MAX4599 Packages available: 6-pin Small Compact SC70 Specifications are given for 2.5V, 3.3V and 5V power supply operation. Operating voltage range is 2.0V to 6.0V. To minimize PC board area use, the PI5A4599A is available in a compact 6-pin SC70 package. Operating temperature range is 40°C to 85°C. Functional Diagram, Pin Configuration PI5A4599A IN 1 6 NO V+ 2 5 COM Applications Communication Circuits Cellular Phones Audio and Video Signal Routing Portable Battery-Operated Equipment Data Acquisition Systems Computer Peripherals Telecommunications Relay Replacement Wireless Terminals and Peripherals 4 NC GND 3 SC70-6 Top View Switches shown for Logic 0 input Truth Tables PI5 A4 5 9 9 A 1 Lo g ic NC NO 0 ON O FF 1 O FF ON PS8553 08/10/01 PI5A4599A SOTINY Low Resistance, Low -Voltage Single-Supply SPDT Switch 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 Absolute Maximum Ratings Thermal Information Voltages Referenced to GND V+ ........................................................................... 0.5V to +7V Continuous Power Dissipation VIN, VCOM, VNC, VNO (Note 1) ...................... 0.5V to VCC +2V or 30mA, whichever occurs first Storage Temperature ......................................... 65ºC to +150ºC SC70-6 (derate 3.1mW/ºC above +70ºC) ............................. 245mW Lead Temperature (soldering, 10s) .................................. +300ºC Current (any terminal) ..................................................... ±30mA Peak Current, COM, NO, NC (Pulsed at 1ms, 10% duty cycle) ..................................... ±30mA Note: 1. Signals on NC, NO, COM, or IN exceeding V+ or Gnd are clamped by internal diodes. Limit forward diode current to 30mA. Caution: Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions beyond those indicated in the operational sections of this specification is not implied. Electrical Specifications - Single +5V Supply (V+ = +5V ± 10%, GND = 0V, VINH = 2.4V, VINL = 0.8V) Parame te r Symbol Conditions Te mp.(°C) M in.(1) Full 0 Typ.(2) M ax.(1) Units V+ V Analog Switch Analog Signal Range(3) VANALOG On Resistance RON On- Resistance Match Between Channels(4) ∆RON 25 V+ = 4.5V, ICOM = - 30mA, VNO or VNC = +2.5V V+ = 5V, ICOM = - 30mA, VNO or VNC = 1V, 2.5V, 4V INO(OFF) or INC(OFF) V+ = 5.5V, VCOM = 0V, VNO or VNC = 4.5V COM Off Leakage Current(6) ICOM(OFF) V+ = 5.5V, VCOM = + 4.5V, VNO or VNC = ± 0V COM On Leakage Current(6) ICOM(ON) V+ = 5.5V , VCOM = +4.5V VNO or VNC = +4.5V NO or NC Off Leakage Current(6) Full 2 8 10 25 0.1 Full RFLAT(ON) On- Resistance Flatness(5) 7 0.5 ohm 1 25 2.72 Full 3.5 4 25 0.5 Full 5 25 1.0 Full 10 25 1.0 Full 10 0.18 0.5 5 0.20 1.0 nA 10 0.20 1.0 10 PS8553 08/10/01 PI5A4599A SOTINY Low Resistance, Low -Voltage Single-Supply SPDT Switch 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 Electrical Specifications - Single +5V Supply (continued) (V+ = + 5V ± 10%, GND = 0V, VINH = 2.4V, VINL = 0.8V) Parame te r Symbol Conditions Input High Voltage VIH Guaranteed logic High Level Input Low Voltage VIL Guaranteed logic Low Level Input Current with Voltage High IINH VIN = 2.4V, all others = 0.8V Input Current with Voltage Low IINL VIN = 0.8V, all others = 2.4V Te mp(ºC) M in.(1) Typ.(2) M ax.(1) Units Logic Input 2 Full 0.8 1 0.005 1 1 0.005 1 7 15 V µA Dynamic Turn- On Time 25 tON VCC = 5V, Figure 1 Turn- Off Time tOFF Break- Before- Make tBBM Charge Injection(3) Q Figure 3 Full 25 1 10 25 10 25 1.5 RL = 50 ohms, CL = 5pF, f = 1MHz, Figure 4 80 Crosstalk(8) XTALK RL = 50 ohms, CL = 5pF, f = 1MHz, Figure 5 80 NC or NO Capacitance C(OFF) COM Off Capacitance CCOM(OFF) COM On Capacitance CCOM(ON) 3dB Bandwidth BW 5 pC dB 5.0 f = 1MHz, Figure 6 pF 5.0 f = 1MHz, Figure 7 RL = 50 ohms, Figure 8 ns 5 OIRR Off Isolation 7 Full Full CL = 1nF, VGEN = 0V, RGEN = 0 ohm, Figure 2 20 13 Full 300 MHz Supply Power- Supply Range V+ Positve Supply Current I+ VCC = 5.5V, VIN = 0V or V+ Full 2 6 V 1 µA Notes: 1. The algebraic convention, where most negative value is a minimum and most positive is a maximum, is used in this data sheet. 2. Typical values are for DESIGN AID ONLY, not guaranteed or subject to production testing. 3. Guaranteed by design. 4. ∆RON = RON max. - RON min. 5. Flatness is defined as the difference between the maximum and minimum value of On-resistance measured. 6. Leakage parameters are 100% tested at maximum rated hot temperature and guaranteed by correlation at +25ºC. 7. Off Isolation = 20log10 [ VCOM / (VNO or VNC) ]. See Figure 3. 8. Between any two switches. See Figure 4. 3 PS8553 08/10/01 PI5A4599A SOTINY Low Resistance, Low -Voltage Single-Supply SPDT Switch 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 Electrical Specifications - Single +3.3V Supply (V+ = +3.3V ± 10%, GND = 0V, VINH = 2.4V, VINL = 0.8V) Parame te r Symbol Conditions Te mp.(ºC) M in.(1) Typ.(2) M ax.(1) Units V+ V Analog Switch Analog Signal Range(3) On- Resistance VANALOG RON V+ = 3V, ICOM = 30mA, VNO or VNC = 1.5V 25 12 Full RFLAT(ON) V+ = 3.3V, ICOM = 30mA, VNO or VNC = 0.8V, 2.5V 14.0 17 25 On- Resistance Match Between Channels(4) On- Resistance Flatness(3,5) 0 0.2 Full 0.5 Ω 1 25 0.5 Full 4 5 Dynamic Turn- On Time tON Turn- Off Time tOFF Break- Before- Make tBBM Charge Injection(3) 25 V+ =3.3V, VNO or VNC = 1.5V, Figure 1 15 Full 40 25 1.5 Full Full Q CL = 1nF, VGEN = 0V, RGEN = 0V, Figure 2 25 I+ V+ = 3.6V, VIN = 0V or V+ All Channels on or off Full 12 ns 20 25 Figure 3 25 10 5 1.3 5 pC 1 µA Supply Positive Supply Current Logic Input Input High Voltage VIH Guaranteed logic high level Full Input Low Voltage VIL Guaranteed logic low level Full Input High Current IINH VIN = 2.4V, all others = 0.8V Full 1 1 Input Low Current IINL VIN = 0.8V, all others = 2.4V Full 1 1 2 V 0.8 µA Notes: 1. The algebraic convention, where most negative value is a minimum and most positive is a maximum, is used in this data sheet. 2. Typical values are for DESIGN AID ONLY, not guaranteed or subject to production testing. 3. Guaranteed by design. 4. ∆RON = RON max. - RON min. 5. Flatness is defined as the difference between the maximum and minimum value of On-resistance measured. 6. Leakage parameters are 100% tested at maximum rated hot temperature and guaranteed by correlation at +25ºC. 7. Off Isolation = 20log10 [ VCOM / (VNO or VNC) ]. See Figure 4. 8. Between any two switches. See Figure 5. 4 PS8553 08/10/01 PI5A4599A SOTINY Low Resistance, Low -Voltage Single-Supply SPDT Switch 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 Electrical Specifications - Single +2.5V Supply (V+ = +2.5V ± 10%, GND = 0V, VINH = 2.4V, VINL = 0.8V) Parame te r Symbol Conditions Te mp.(ºC) M in.(1) Typ.(2) M ax.(1) Units V+ V Analog Switch Analog Signal Range(3) VANALOG On- Resistance RON On- Resistance Match Between Channels(4) ∆RON On- Resistance Flatness(3,5) RFLAT(ON) 0 V+ = 2.5V, ICOM = 30mA, VNO or VNC = 1.5V 25 20 Full 26 25 V+ = 2.5V, ICOM = 30mA, VNO or VNC = 0.8V, 2.5V 22 0.3 Full 0.5 Ω 1 25 0.5 Full 5 6 Dynamic Turn- On Time tON Turn- Off Time tOFF Break- Before- Make tBBM V+ = 2.5V, VNO or VNC = 1.5V, Figure 1 Figure 3 25 20 30 Full 45 25 20 Full 25 10 Full 5 Q CL = 1nF, VGEN = 0V, RGEN = 0V, Figure 2 25 I+ V+ = 2.5V, VIN = 0V or V+ All Channels on or off Full Input High Voltage VIH Guaranteed logic high level Full Input Low Voltage VIL Guaranteed logic low level Full Input High Current IINH VIN = 2.4V, all others = 0.8V Full 1 1 Input Low Current IINL VIN = 0.8V, all others = 2.4V Full 1 1 Charge Injection(3) ns 30 0.9 5 pC 1 µA Supply Positive Supply Current Logic Input 2 V 0.8 µA Notes: 1. The algebraic convention, where most negative value is a minimum and most positive is a maximum, is used in this data sheet. 2. Typical values are for DESIGN AID ONLY, not guaranteed or subject to production testing. 3. Guaranteed by design. 4. ∆RON = RON max. - RON min. 5. Flatness is defined as the difference between the maximum and minimum value of On-resistance measured. 6. Leakage parameters are 100% tested at maximum rated hot temperature and guaranteed by correlation at +25ºC. 7. Off Isolation = 20log10 [ VCOM / (VNO or VNC) ]. See Figure 4. 8. Between any two switches. See Figure 5. 5 PS8553 08/10/01 PI5A4599A SOTINY Low Resistance, Low -Voltage Single-Supply SPDT Switch 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 Test Circuits/Timing Diagrams V+ V+ Switch +3V* Input NO or NC COM VOUT RL 1kΩ IN Logic Input Logic +3V Input 0V tr <20ns tf <20ns 50% tOFF CL 35pF Switch Output GND VOUT 90% 90% 0V tON LOGIC INPUT WAVEFORMS INVERTED FOR SWITCHES THAT HAVE OPPOSITE LOGIC * 1.5V FOR 3.3V SUPPLY CL INCLUDES FIXTURE AND STRAY CAPACITANCE RL VOUT = VNO R L + R ON ( ) Figure 1. Switching Time +5V ∆VOUT V+ COM VGEN NO or NC .1µF VOUT VOUT CL 0.22nF IN OFF OFF ON IN Logic Input GND IN OFF ON OFF Q = (∆VOUT)(CL) Figure 2. Charge Injection V+ Logic Input V+ +3V NC VOUT COM +3V 0 50% NO RL 1kΩ IN Logic Input CL 35pF Switch Output (VOUT) GND 0.9xVOUT 0.9xVOUT tBBM CL INCLUDES FIXTURE AND STRAY CAPACITANCE Figure 3. Break-Before-Make Interval 6 PS8553 08/10/01 PI5A4599A SOTINY Low Resistance, Low -Voltage Single-Supply SPDT Switch 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 Test Circuits/Timing Diagrams (continued) VCC +5V 10nF 10nF V+ V+ NC Signal Generator 0dBm COM1 0V or 2.4V IN 50Ω NC or NO Analyzer 50Ω COM NO IN Analyzer GND 50Ω 50Ω GND Figure 5. Crosstalk Figure 4. Off Isolation/On-Channel Bandwidth +5V 10nF 10nF COM V+ COM IN +5V V+ Capacitance Meter 0V or 2.4V IN f = 1MHz Capacitance Meter 0V or 2.4V NC f = 1 MHz NC GND GND Figure 7. Channel-On Capacitance Figure 6. Channel-Off Capacitance 10nF +5V V+ COM NC or NO Vo RL 50Ω Rg = 50Ω GND Figure 8. Bandwidth 7 PS8553 08/10/01 PI5A4599A SOTINY Low Resistance, Low -Voltage Single-Supply SPDT Switch 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 6-Pin SC70 (C) Package 6 5 4 1 2 3 Notes: 1) Controlling dimensions in millimeters 2) Ref: JEDEC MO-203AB Ordering Information Part Numbe r Package Package Top M ark PI5A4599ACX SC70- 6 A63 Pericom Semiconductor Corporation 2380 Bering Drive • San Jose, CA 95131 • 1-800-435-2336 • Fax (408) 435-1100 • http://www.pericom.com 8 PS8553 08/10/01