RL801S RECTRON THRU SEMICONDUCTOR TECHNICAL SPECIFICATION RL806S GLASS PASSIVATED SILICON RECTIFIER VOLTAGE RANGE 50 to 800 Volts CURRENT 8.0 Amperes FEATURES Low Ieakage Low forward voltage drop High current capability High surge capability High reliability D2PAK MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. .200 (5.08) .052 (1.32) .048 (1.22) .032 (0.81) .401 (10.19) .399 (10.13) Single phase, half wave, 60 Hz, resistive or inductive load. .185 (4.70) .177 (4.50) .051 (1.29) .049 (1.25) .065 (1.65) .624 (15.84) .576 (14.64) .343 (8.70) .335 (8.50) Case: D2PAK molded plastic Epoxy: Device has UL flammability classification 94V-O Lead: MIL-STD-202E method 208C guaranteed Mounting position: Any Weight: 2.2 grams Polarity: As marked .151 (3.84) .143 (3.64) * * * * * * .05 (1.27 REF.) MECHANICAL DATA .043 (1.10) * * * * * .015 (0.381) For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) MAXIMUM RATINGS (At T A = 25 oC unless otherwise noted) SYMBOL RL801S RL802S RL803S RL804S RL805S RL806S UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 Volts Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 RATINGS Maximum Average Forward Rectified Current T C = 100oC (Note 1) Peak Forward Surge Current, 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Thermal Resistance Typical Junction Capacitance (Note 2) Operating and Storage Temperature Range Volts IO 8.0 Amps I FSM 200 Amps RθJC 3.6 0 CJ 40 T J , T STG -65 to + 150 C/ W pF 0 C ELECTRICAL CHARACTERISTICS (At TA = 25oC unless otherwise noted) SYMBOL CHARACTERISTICS Maximum Instantaneous Forward Voltage at 8.0A DC Maximum DC Reverse Current @T C = 25 o C at Rated DC Blocking Voltage @T C = 100 o C NOTES : 1.Case Temperature Measured at Metal Tab. 2.Measured at 1 MHZ and applied reverse voltage of 4.0 volts. 3.Suffix “ R “ = Common Anode. VF IR RL801S RL802S RL803S RL804S 1.1 10 RL805S RL8506S UNITS Volts uAmps 100 2001-4 FIG. 1 - TYPICAL FORWARD CURRENT DERATING CURVE 1000 6 4 Single Phase Half Wave 60Hz Inductive or Resistive Load 2 0 0 50 100 PEAK FORWARD SURGE CURRENT, (A) 150 ) FIG. 3 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 300 8.3ms Single Half Sine-Wave (JEDED Method) 250 INSTANTANEOUS REVERSE CURRENT, (uA) 8 CASE TEMPERATURE, ( 200 TC = 100 100 10 TC = 25 1.0 0.1 0 150 100 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) 50 0 1 2 5 10 20 50 NUMBER OF CYCLES AT 60Hz 100 FIG. 4 - TYPICAL JUNCTION CAPACITANCE 200 JUNCTION CAPACITANCE, (pF) FIG. 2 - TYPICAL REVERSE CHARACTERISTICS 10 100 60 40 20 10 TJ = 25 6 4 2 1 .1 .2 .4 1.0 2 4 10 20 REVERSE VOLTAGE, ( V ) 40 100 INSTANTANEOUS FORWARD CURRENT, (A) AVERAGE FORWARD CURRENT, (A) RATING AND CHARACTERISTIC CURVES ( RL801S THRU RL806S ) FIG. 5 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 40 20 10 4 2 1.0 .4 .2 TJ=25 Pulse Width = 300uS 1% Duty Cycle .1 .6 .7 .8 .9 1.0 1.1 1.2 1.3 INSTANTANEOUS FORWARD VOLTAGE, (V) RECTRON