SM4001 RECTRON THRU SEMICONDUCTOR TECHNICAL SPECIFICATION SM4007 SURFACE MOUNT GLASS PASSIVATED SILICON RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere FEATURES * * * * * * Glass passivated device Ideal for surface mounted applications Low leakage current Metallurgically bonded construction Mounting position: Any Weight: 0.015 gram MELF MECHANICAL DATA * Epoxy : Device has UL flammability classification 94V-0 .205 (5.2) .190 (4.8) SOLDERABLE ENDS .028 (.60) .018 (.46) .106 (2.7) .095 (2.4) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) MAXIMUM RATINGS (At T A = 25 oC unless otherwise noted) SYMBOL RATINGS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current T A = 75oC Peak Forward Surge Current I FM(surge): 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Maximum Thermal Resistance 50 100 200 400 600 800 1000 VRMS 35 70 140 280 420 560 700 Volts VDC 50 100 200 400 600 800 1000 Volts Volts IO 1.0 Amps I FSM 30 Amps (Note 2) Rθ JL (Note 3) Rθ JA 20 50 15 -65 to + 175 CJ T J , T STG Typical Junction Capacitance (Note 1) Operating and Storage Temperature Range SM4001 SM4002 SM4003 SM4004 SM4005 SM4006 SM4007 UNITS VRRM 0 0 C/ W C/ W pF 0 C ELECTRICAL CHARACTERISTICS (At TA = 25oC unless otherwise noted) SYMBOL CHARACTERISTICS Maximum Forward Voltage at 1.0A DC VF Maximum Full Load Reverse Current, Full cycle Average at TA = 75 o C Maximum DC Average Reverse Current at Rated DC Blocking Voltage @T A = 25 o C IR @T A = 125 o C NOTES : 1. Measured at 1.0 MHz and applied average voltage of 4.0VDC 2. Thermal resistance junction to terminal 6.0mm2 coppeer pads to each terminal. 3. Thermal resistance junction to ambient, 6.0mm2 coppeer pads to each terminal. SM4001 SM4002 SM4003 SM4004 SM4005 SM4006 SM4007 UNITS 1.1 Volts 30 uAmps 5.0 50 uAmps uAmps 2001-4 PEAK FORWARD SURGE CURRENT, (A) FIG. 1 - TYPICAL FORWARD CURRENT DERATING CURVE 1.0 .8 .6 .4 Single Phase Half Wave 60Hz Resistive or Inductive Load .2 0 0 25 50 75 100 125 150 175 AMBIENT TEMPERATURE, ( ) INSTANTANEOUS REVERSE CURRENT, (uA) FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 10 1.0 TJ = 25 .1 Pulse Width = 300us 1% Duty Cycle .01 .4 .6 .8 1.0 1.2 1.4 1.6 INSTANTANEOUS FORWARD VOLTAGE, (V) JUNCTION CAPACITANCE, (pF) INSTANTANEOUS FORWARD CURRENT, (A) AVERAGE FORWARD CURRENT, (A) RATING AND CHARACTERISTIC CURVES ( SM4001 THRU SM4007 ) FIG. 2 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 50 40 30 20 10 8.3ms Single Half Sine-Wave (JEDED Method) 0 1 2 6 8 10 4 20 40 60 80 100 NUMBER OF CYCLES AT 60Hz FIG. 4 - TYPICAL REVERSE CHARACTERISTICS 10 4 TJ = 100 1.0 .4 .1 .04 TJ = 25 .01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) FIG. 5 - TYPICAL JUNCTION CAPACITANCE 200 100 60 40 20 10 6 4 TJ = 25 2 1 .1 .2 .4 1.0 2 4 10 20 40 REVERSE VOLTAGE, ( V ) 100 RECTRON