SR4001PT CHENMKO ENTERPRISE CO.,LTD THRU SURFACE MOUNT GLASS PASSIVATED SILICON RECTIFIER VOLTAGE RANGE 50 - 1000 Volts CURRENT 1.0 Ampere SR4007PT FEATURES * * * * Low leakage current Ideal for surface mounted applications Metallurgically bonded construction Plastic package has Underwriters Laboratory Flammability Classification 94V-0 * Glass passivated junction * High temperature soldering guaranteed : 260oC/10 seconds at terminals MELF (2) 0.205(5.2) SOLDERABLE ENDS 0.190(4.8) MECHANICAL DATA 0.024(.60) 0.018(.46) Case: JEDEC MELF molded plastic Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Indicated by cathode band Weight: 0.116 gram (1) 0.105(2.7) 0.095(2.4) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60 HZ, resistive or inductive load. For capacitive load, derate current by 20%. MELF Dimensions in inches and (millimeters) MAXIMUM RATINGES ( At TA = 25oC unless otherwise noted ) RATINGS SYMBOL SR4001PT SR4002PT SR4003PT SR4004PT SR4005PT SR4006PT SR4007PT UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 Maximum Average Forward Rectified Current TA = 75oC Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Junction Capacitance (Note 1) Volts IO 1.0 Amps IFSM 30 Amps CJ 15 pF (Note 2) R JL 20 o C/W (Note 3) R JA 50 o C/W Maximum Thermal Resistance Operating and Storage Temperature Range TJ, TSTG -65 to +175 o C ELECTRICAL CHARACTERISTICS ( At TA = 25oC unless otherwise noted ) CHARACTERISTICS Maximum Instantaneous Forward Voltage at 1.0 A DC SYMBOL SR4001PT SR4002PT SR4003PT SR4004PT SR4005PT SR4006PT SR4007PT VF 1.0 Volts 30 uAmps 5.0 uAmps 50 uAmps Maximum Full Load Reverse Current, Full cycle Average at TA = 75oC Maximum Average Reverse Current at Rated DC Blocking Voltage @ TA = 25oC IR o @ TA = 125 C NOTES : 1. Measured at 1.0 MHZ and applied reverse voltage of 4.0 volts 2. Thermal Resistance Junction to terminal, 6.0 mm2 copper pads to each terminal 3. Thermal Resistance Junction to ambient, 6.0 mm2 copper pads to each terminal UNITS 2002-5 RATING CHARACTERISTIC CURVES ( SR4001PT THRU SR4007PT ) 0.75 0.50 Single Half Wave 60HZ Resistive or Inductive Load 0.25 0 0 25 50 75 100 125 150 175 PEAK FORWARD SURGE CURRENT, (A) AVERAGE FORWARD CURRENT, (A) FIG. 1 - TYPICAL FORWARD CURRENT DERATING CURVE 1.00 FIG. 2 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 40 35 8.3 ms Single Half Sine-Wave (JEDEC Method) 30 25 20 15 10 0 0 2 AMBIENT TEMPERATURE, ( oC ) FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARCTERISTICS 20 40 60 80 100 FIG. 4 - TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT, (uA) PULSE WIDTH=300uS 1% DUTY CYCLE 1.0 TJ = 25oC 0.1 4 TJ = 100oC 1.0 0.4 0.1 .04 TJ = 25oC .01 0.6 0.8 1.0 1.2 1.4 1.6 1 INSTANTANEOUS FORWARD VOLTAGE, (V) 20 40 60 FIG. 5 - TYPICAL JUNCTION CAPACITANCE TJ = 25oC 100 60 40 20 10 4 2 1 .1 .4 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) 200 JUNCTION CAPACITANCE, (pF) INSTANTANEOUS FORWARD CURRENT, (A) 6 8 10 10 10 .01 0.4 4 NUMBER OF CYCLES AT 60HZ 1.0 4 10 REVERSE VOLTAGE, (V) 40