BUY82 NPN SILICON PLANAR EPITAXIAL TRANSISTOR IN HERMETICALLY SEALED METAL CASE MECHANICAL DATA Dimensions in mm(Inches) 8.51 (0.34) 9.40 (0.37) 7.75 (0.305) 8.51 (0.335) 6.10 (0.240) 6.60 (0.260) 12.70 (0.500) min. 0.89 max. (0.035) 0.41 (0.016) 0.53 (0.021) dia. 5.08 (0.200) typ. 2.54 (0.100) 2 1 3 0.74 (0.029) 1.14 (0.045) 0.71 (0.028) 0.86 (0.034) 45° TO39 PACKAGE(TO205AD) Pin 1 = Emitter Pin 2 = Base Pin 3 = Collector ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated) VCBO Maximum Collector to Base Continuous Voltage 150V VCEO Maximum Collector to Emitter Continous voltage 60V VEBO Maximum Emitter to Base Continouse reverse Voltage 7V IC Maximum Continuous Collector Current 10A IB Maximum Continuous Base Current 2A PTOT Maximum total Power Dissipation up to Tcase = 25°C 30W Tcase= 100°C 15W Tamb = 25°C 1W Tc Junction Temperature -65 to +175°C Tstg Storage Temperature 150°C Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document Number 3298 Issue 1 BUY82 THERMAL CHARACTERISTICS Rth j-case Thermal resistance to case Max 5.0°C/W Rth j-amb Thermal resistance juntion to ambient Max 150°C/W ELECTRICAL CHARACTERISTICS (Tcase = 25°C unless otherwise stated) h21E VCE(SAT) Parameter Test Conditions Static value of common-emitter VCE = 5V IC = 1.5A 40 forward current transfer ratio * VCE = 5v IC = 10A 15 IC = 10A IB = 5V 1.0 IC = 1.5A IB = 150mA 0.8 IC = 10A IB = 1.0A 1.8 IC = 1.5A IB = 150mA 1.2 Collector-Emitter Saturation Voltage* VBE(SAT) Base - Emitter Saturation Voltage* ICBO Collector - Base Cut-off Current IEBO Emitter - Base Cut-off Current ton Turn on time toff Turn off time C22b Output capacitance C11b Input capacitance fT Transition Frequency Min. VCB = 100V IE = 0 Typ. Max. Unit — 10 TCase = 150°C 500 VEB = 5V IC = 0 10 IC = 5A IB1 = 0.5A 1 IC = 10A IB1 = 1A IC = 5A IB1 = - IB2 =0.5A 1 IC = 10A IB1 = - IB2 = 1A 1 VCB = 10V IE = 0 IC = 0 IC = 100mA 1.5 f = 20MHz µs pF 850 f =1MHz VCE = 10V µA 200 f =1MHz VEB = 0.5V V 40 MHz * Measured under pulse conditions: Pulse length = 300 ms, duty cycle = 1.5% Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document Number 3298 Issue 1