2N3792 MECHANICAL DATA Dimensions in mm(inches) PNP SILICON EPITAXIAL BASE POWER TANSISTORS 40.01 (1.575) Max. 26.67 (1.050) Max. 4.47 (0.176) Rad. 2 Pls. 22.23 (0.875) Max. 1.09 (0.043) 0.97 (0.038) Dia. 1.63 (0.064) 1.52 (0.060) 11.43 (0.450) 6.35 (0.250) APPLICATIONS 12.19 (0.48) 11.18 (0.44) Linear Power and Switching Applications 30.40 (1.197) 29.90 (1.177) 4.09 (0.161) 3.84 (0.151) 2 Pls 2 11.18 (0.440) 10.67 (0.420) 1 16.97 (0.668) 16.87 (0.664) TO3 (TO-204AA) PIN 1 — Base PIN 2 — Emitter Case is Collector. ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated) VCBO VCEO(sus) VEBO IC IB PTOT Tstg Tj Collector – Base Voltage(IE = 0) Collector – Emitter Voltage (IB = 0) Emitter – Base Voltage(IC = 0) Collector Current Base Current Total Power Dissipation at Tcase = 25°C Storage Temperature Junction Temperature - 80V - 80V - 7V - 10A - 4A 150W 65 to 200°C 200°C THERMAL CHARACTERISTICS RθJC Thermal Resistance, Junction to Case 1.17 °C/W Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document Number 3325 Issue 2 2N3792 ELECTRICAL CHARACTERISTICS (Tcase = 25°C unless otherwise stated) Parameter VCEO(sus)* VCE(sat)* Collector - Emitter Sustaining Voltage Collector - Emitter Saturation Voltage VBE(on)* Base Emitter Voltage IEBO Emmiter Cut-off Current ICEX Collector Cut-off Current hFE* ft DC Current Gain Transition Frequency Test Conditions IC = - 200mA IB = 0 Min. Typ. Max. Unit -80 V -1 IC = - 5A IB = - 0.5A IC = - 5A VCC = - 2V -1.8 IC = - 10A VCC = - 4V -4 IC = 0 VEB =7V -5 VBE = -1.5V VCE = -80V -1 Tc = 150°C -10 IC = 1A VCE = 2V 50 IC = 3A VCE = 2V 30 IC = 10A VCE = 4V 5 IC = -0.5A VCE = -10V f =1MHz 4 V mA mA 180 — MHz * Pulsed duration = 300 µs, duty cycle = 1.5% Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document Number 3325 Issue 2