SHANGHAI SUNRISE ELECTRONICS CO., LTD. KBPC1005 THRU KBPC110 SINGLE PHASE SILICON BRIDGE RECTIFIER TECHNICAL SPECIFICATION VOLTAGE: 50 TO 1000V CURRENT: 3.0A FEATURES KBPC-1 • Ideal for printed circuit board • Surge overload rating: 50 A peak • High case dielectric strength • High temperature soldering guaranteed: 250oC/10sec/0.375"(9.5mm) lead length at 5 lbs tension MECHANICAL DATA • Terminal: Plated leads solderable per MIL-STD 202E, method 208C • Case: UL-94 Class V-O recognized flame retardant epoxy • Polarity: Polarity symbol marked on body • Mounting position: Hole thru for #6 screw Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Single-phase, half-wave, 60Hz, resistive or inductive load rating at 25oC, unless otherwise stated, for capacitive load, derate current by 20%) RATINGS SYMBOL Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current VRRM VRMS VDC (Tc=50oC) Peak Forward Surge Current (8.3ms single half sine-wave superimposed on rated load) Maximum Instantaneous Forward Voltage (at forward current 1.5A DC) Maximum DC Reverse Current Ta=25oC (at rated DC blocking voltage) Operating Temperature Range Storage Temperature o Ta=100 C KBPC 1005 50 35 50 KBPC 101 100 70 100 KBPC 102 200 140 200 KBPC 104 400 280 400 KBPC 106 600 420 600 KBPC 108 800 560 800 KBPC UNITS 110 1000 V 700 V 1000 V IF(AV) 3.0 A IFSM 50 A VF 1.1 V 10.0 µA 500 µA IR TJ TSTG -55 to +125 -55 to +150 o C C o http://www.sse-diode.com