SHANGHAI SUNRISE ELECTRONICS CO., LTD. W005 THRU W10 SINGLE PHASE SILICON BRIDGE RECTIFIER VOLTAGE: 50 TO 1000V TECHNICAL SPECIFICATION CURRENT: 1.5A WOB FEATURES • Ideal for printed circuit board • Surge overload rating: 50 A peak • High case dielectric strength • High temperature soldering guaranteed: 250oC/10sec/0.375"(9.5mm) lead length at 5 lbs tension MECHANICAL DATA • Terminal: Plated leads solderable per MIL-STD 202E, method 208C • Case: UL-94 Class V-O recognized flame retardant epoxy • Polarity: Polarity symbol marked on body • Mounting position: Any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Single-phase, half-wave, 60Hz, resistive or inductive load rating at 25oC, unless otherwise stated, for capacitive load, derate current by 20%) RATINGS Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current (Ta=50oC) Peak Forward Surge Current (8.3ms single half sine-wave superimposed on rated load) Maximum Instantaneous Forward Voltage (at forward current 1.5A DC) Maximum DC Reverse Current Ta=25oC (at rated DC blocking voltage) Ta=100oC Operating Temperature Range Storage Temperature SYMBOL W005 W01 W02 W04 W06 W08 W10 UNITS VRRM VRMS VDC 50 35 50 100 70 100 200 140 200 400 280 400 600 420 600 800 560 800 1000 700 1000 V V V IF(AV) 1.5 A IFSM 50 A VF 1.0 V 10.0 500 -55 to +125 -55 to +150 µA µA IR TJ TSTG o C C o http://www.sse-diode.com