G2SB05 THRU G2SB100 SINGLE PHASE GLASS PASSIVATED BRIDGE RECTIFIER Voltage: 50 to 1000V Current: 1.5A Features GBL Glass passivated chip junction Ideal for printed circuit board High case dielectric strength High surge current capability Mechanical Data Terminal: Plated leads solderable per MIL-STD 202E, Method 208C Case: UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity: Polarity symbol marked on body Mounting position: any Dimensions in millimeters MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half -wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated, for capacitive load, derate current by 20%) Symbol G2SB 05 G2SB 10 G2SB 20 G2SB 40 G2SB 60 G2SB 80 G2SB 100 units Maximum repetitive peak reverse voltage Vrrm 50 100 200 400 600 800 1000 V Maximum RMS voltage Vrms 35 70 140 280 420 560 700 V Maximum DC blocking voltage Vdc 50 100 200 400 600 800 1000 V Maximum average forward rectified output current Ta = 25℃ Peak forward surge current single sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage drop per leg at 0.75A If(av) 1.5 A Ifsm 80 A Vf 1.0 V I2t 27 A2Sec Ir 5.0 300 µA Maximum thermal resistance per leg Rth(ja) Rth(jc) 40.0 12.0 ℃/W Operating junction and storage temperature range Tj, Tstg -55 to +150 ℃ Rating for fusing (t < 8.3ms) Maximum DC reverse current at rated DC blocking voltage per leg Ta = 25°C Ta = 125°C Note: 1. Units mounted on P.C.B. with 0.5 x 0.5" (12 x 12mm) copper pads, 0.375" (9.5mm) lead length Rev.A7 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES G2SB05 THRU G2SB100 Rev.A7 www.gulfsemi.com