DC/DC Converter TAP Series 15 Watt Features Highest Power Density in 50 x 25 x 10 mm (2” x 1” x 0.4”) Package Wide 2 : 1 Input Range Very high Efficiency up to 87% Input Filter meets EN 55022, Class A and FCC, Level A without external Components Shielded Metal Case with insulated Baseplate Industry Standard Pinout High Reliability, MTBF > 1.2 Mio. h 2 Year Product Warranty The TAP Series is a range of high performance, isolated DC/DCconverter modules with highest power density. State of the art SMDtechnology guarantees a product with very high reliability. I/O-isolation of 1’500 VDC together with conducted noise compliance to EN 55022A and FCC, level A makes these converters the ideal product for communications, battery powered mobile equipments and distributed power system applications. Models Ordercode TAP 1210 TAP 1211 TAP 1212 TAP 1213 TAP 1222 TAP 1223 TAP 2410 TAP 2411 TAP 2412 TAP 2413 TAP 2422 TAP 2423 TAP 4811 TAP 4812 TAP 4813 TAP 4822 TAP 4823 www.tracopower.com Input voltage range Output voltage Output current max. Efficiency typ. 9 – 18 VDC 3,3 VDC 5 VDC 12 VDC 15 VDC ± 12 VDC ± 15 VDC 2‘400 2‘000 1’000 800 ± 450 ± 350 mA mA mA mA mA mA 77 80 83 83 83 83 % % % % % % 18 – 36 VDC 3,3 VDC 5 VDC 12 VDC 15 VDC ± 12 VDC ± 15 VDC 2‘800 2‘500 1’250 1’000 ± 600 ± 500 mA mA mA mA mA mA 79 82 86 86 86 86 % % % % % % 36 – 75 VDC 5 12 15 ± 12 ± 15 2‘500 1’250 1’000 ± 600 ± 500 mA mA mA mA mA 84 87 87 87 87 % % % % % VDC VDC VDC VDC VDC Page 1 DC/DC Converter TAP Series 15 Watt Input Specifications Input current (no load) 12 Vin models 24 Vin models 48 Vin models 30 mA typ. 20 mA typ. 10 mA typ. Input current (full load) 12 Vin models 24 Vin models 48 Vin models 1000 mA typ. 720 mA typ. 360 mA typ. Surge voltage protection (1 sec max.) t.b.a. t.b.a. t.b.a. 12 Vin models 24 Vin models 48 Vin models Conducted noise (input) EN 55022 level A, FCC part 15, level A Output Specifications Voltage set accuracy ±2% Regulation ± 0.5 % max. – Input variation Vin min. to Vin max. – Load variation 10 – 90 % – single output models – dual output models balanced load – dual output models unbalanced load ± 1.0 % max. ± 2.0 % max. ± 3.5 % max. Ripple and noise (20 MHz Bandwidth) 75 mVpk-pk max. Temperature coefficient ± 0.05 % / °C Output current limitation >120% of Iout max., constant current Short circuit protection Foldback mode Long term short circuit operation may cause damage to the converter. Capacitive load – single output models – dual output models 200 µF max. 50 µF max. General Specifications Temperature ranges – Operating – Case temperature – Storage – 25 °C ... + 75 °C (derating 3% /°C above 60°C) + 100 °C max. – 40 °C ... + 125 °C Humidity (non condensing) 90 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217 E) >1.2 Mio. h @ + 25 °C Isolation voltage Input/Output – 12/24 VDC models – 48 VDC models 750 VDC 1’500 VDC Isolation capacity Input/Output 2.2 nF typ Isolation resistance Input/Output (500 VDC) > 1‘000 M Ohm Switching frequency (fixed) 400 kHz typ. (Pulse width modulation PWM) Safety standards UL 1950, EN 60950, IEC 60950 Compliance up to 60 VDC input voltage (SELV limit) Safety approvals UL/cUL File E188913 All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. www.tracopower.com Page 2 DC/DC Converter TAP Series 15 Watt Physical Specifications Case material Steel nickel-plated Baseplate Epoxy FR4 Potting material Silicon rubber TSE (flammability to UL 94 V-0) Weight 30 g (1.2 oz) Soldering temperature max. 260 °C / 10 sec. Outline Dimensions mm (inches) 50.8 ±0.5 (1.0 ±0.02) 5 25.4 ±0.5 Bottom View (0.8) 4 Pin-Out Pin Single Dual 1 +Vin (Vcc) +Vin (Vcc) 2 –Vin (GND) –Vin (GND) 3 +Vout +Vout 4 No pin Common 5 –Vout –Vout (0.18) (0.43 ±0.02) 4.5 10.8 ±0.5 2.5 ±0.5 (0.1 ±0.02) 1 2 10.16 10.16 3 20.32 (0.8) (0.4) 20.32 (0.6 ±0.02) (0.4) 15.2 ±0.5 (0.2) (0.4 ±0.02) 10.2 ±0.5 5.08 (2.0 ±0.02) Insulated baseplate Pin diameter ø 0.8 ±0.05 (0.03 ±0.002) Specifications can be changed without notice Rev. 06/00 Jenatschstrasse 1 • CH-8002 Zurich • Switzerland Tel. +41-1284 2911 • Fax +41-1201 1168 • e-mail: [email protected] • internet: http://www.tracopower.com Page 3