DC/DC Converters TEN 5 Series, 6 Watt Features ◆ Wide 2:1 Input Range ◆ Full SMD-Design ◆ High Efficiency up to 86% ◆ Extended Operating Temperature ◆ Range -40°C to 85°C ◆ I/O-isolation 1’500 VDC ◆ Indefinite Short-Circuit Protection ◆ Input Filter meets EN 55022, Class A and FCC, Level A without external Components ◆ Shielded Metal Case with insulated Baseplate ◆ 24-pin DIP with Industry Standard Pinout ◆ High Reliability, MTBF >1 Mio. h ◆ 3 Year Product Warranty The TEN 5 Series is a range of DC/DC-converter modules with wide input range of 2:1. State of the art SMD-technology guarantees a product with very high reliability and good cost /performance ratio. High efficiency allows an operating temperature range of -40°C to +85°C without derating. I/O-isolation of 1’500 VDC together with conducted noise compliance to EN 55022-A and FCC, level A makes these converters ideal for a wide range of applications in communications, mobile battery powered equipments and industrial systems. Models Ordercode TEN 5-0510 TEN 5-0511 TEN 5-0512 TEN 5-0513 TEN 5-0521 TEN 5-0522 TEN 5-0523 TEN 5-1210 TEN 5-1211 TEN 5-1212 TEN 5-1213 TEN 5-1221 TEN 5-1222 TEN 5-1223 TEN 5-2410 TEN 5-2411 TEN 5-2412 TEN 5-2413 TEN 5-2421 TEN 5-2422 TEN 5-2423 TEN 5-4810 TEN 5-4811 TEN 5-4812 TEN 5-4813 TEN 5-4821 TEN 5-4822 TEN 5-4823 http://www.tracopower.com Input voltage range 4.5 – 7 VDC 9 – 18 VDC 18 – 36 VDC 36 – 75 VDC Output voltage 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC Output current max. 1200 mA 1000 mA 500 mA 400 mA ± 500 mA ± 250 mA ± 200 mA 1200 mA 1000 mA 500 mA 400 mA ± 500 mA ± 250 mA ± 200 mA 1200 mA 1000 mA 500 mA 400 mA ± 500 mA ± 250 mA ± 200 mA 1200 mA 1000 mA 500 mA 400 mA ± 500 mA ± 250 mA ± 200 mA Efficiency typ. 75 % 79 % 82 % 82 % 79 % 82 % 82 % 77 % 81 % 84 % 84 % 81 % 84 % 84 % 79 % 83 % 86 % 86 % 83 % 86 % 86 % 79 % 83 % 86 % 86 % 83 % 86 % 86 % Page 1 of 3 DC/DC Converters TEN 5 Series 6 Watt Input Specifications Input current no load /full load 5 12 24 48 Vin Vin Vin Vin models models models models 50 mA / 1460 mA typ. 20 mA / 590 mA typ. 5 mA / 290 mA typ. 3 mA / 145 mA typ. Start-up voltage / under voltage shut down 5 12 24 48 Vin Vin Vin Vin models 4.4 VDC / 4.0 VDC models 8.0 VDC / 8.0 VDC models 16.0 VDC / 16.0 VDC models 32.0 VDC / 32.0 VDC Surge voltage (1 sec. max.) 5 12 24 48 Vin Vin Vin Vin models models models models 10 V max. 25 V max. 50 V max. 100 V max. Reverse voltage protection 1.0 A max. Conducted noise (input) EN 55022 level A, FCC part 15, level A Output Specifications Voltage set accuracy Regulation 1% – – – – – Input variation Vin min. to Vin max. Load variation 10 – 100 % single output models dual output models balanced load dual output models unbalanced load 0.3 % max. 1 % max. 1 % max. 3 % max. Ripple and noise (20 MHz Bandwidth) 50 mVpk-pk max. Temperature coefficient ± 0.02 % /K Output current limitation >120 % of Iout max., constant current Short-circuit protection indefinite (automatic recovery) Capacitive load – single output models – dual output models 6800 µF max. 1000 µF max. (each output) General Specifications Temperature ranges – Operating – Case temperature – Storage – 40 °C ... + 85 °C + 100 °C max. – 55 °C ... + 125 °C Derating 3.5% /K above 70°C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217 E) >1 Mio. h @ + 25 °C Isolation voltage Input/Output 1’500 VDC Isolation capacity Input/Output 380 pF typ. Isolation resistance Input/Output (500 VDC) > 1‘000 M Ohm Switching frequency 300 kHz typ. (Pulse frequency modulation PFM) Safety standards UL 60950, IEC 60950, EN 60950 Compliance up to 60 VDC input voltage (SELV limit) Safety approval UL /cUL File E188913 (5Vin models pending) All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 DC/DC Converters TEN 5 Series 6 Watt Physical Specifications Case material steel, Nickel plated Baseplate material non conductive FR4 Potting material epoxy (UL 94V-0 rated) Weight 14 g (0.55 oz) Soldering temperature max. 265 °C / 10 sec. 2.54 (0.1) (0.18 ±0.02) 14 0.5 Insulated Baseplate (0.02) 5 10 ±0.5 (0.2) (0.4 ±0.02) 2.4 ±0.5 2 3 Bottom view 16 (0.2) 5.08 15.24 (0.6) 23 22 22.86 (0.9) 32 ±0.5 (1.25 ±0.02) 4.54 ±0.5 Outline Dimensions mm (inches) 9 11 15.24 (0.6) Pin-Out Pin Single Dual 2 –Vin (GND) –Vin (GND) 3 –Vin (GND) –Vin (GND) 9 No pin Common 11 No con. –Vout 14 +Vout +Vout 16 –Vout Common 22 +Vin (Vcc) +Vin (Vcc) 23 +Vin (Vcc) +Vin (Vcc) (0.1 ±0.02) 20 ±0.5 (0.8 ±0.02) Pin diameter ø 0.5 ±0.05 (0.02 ±0.002) Tolerances ±0.5 (0.02) Specifications can be changed without notice Rev. 05/05.1 Jenatschstrasse 1 · CH-8002 Zurich · Switzerland Tel. +41 43 311 45 11 · Fax +41 43 311 45 45 · [email protected] · www.tracopower.com Page 3 of 3