TRACOPOWER TMLM

Encapsulated Power Supply
TMLM Series
10 Watt
Features
AC/DC Power Modules for PCB Mounting
Highest Power Density
Fully encapsulated Plastic Case
Universal Input 90-264 VAC, 47 - 440 Hz
High Efficiency
EMI meets EN 55022, Class B
Low Ripple and Noise
Short Circuit and Overload Protection
3 Year Product Warranty
The TMLM Series switching power supplies, offer highest power density in
a fully encapsulated module. This feature makes these modules an ideal
solution for all space critical applications in commercial and industrial electronic equipment. Full compliance to European low voltage and EMC
directive, UL and cUL safety approval qualifies this product for worldwide
markets. SMD-technology and a high efficiency guarantees a high reliability of these Power Supplies.
Models
Order code
Output power, max.
TMLM 10103
TMLM 10105
Output voltage
Output current, max.
3.3 VDC
2500 mA
5 VDC
2000 mA
12 VDC
830 mA
TMLM 10115
15 VDC
666 mA
TMLM 10124
24 VDC
420 mA
TMLM 10112
http://www.tracopower.com
10 Watt
Page 1 of 3
Encapsulated Power Supply
TMLM Series
10 Watt
Input Specifications
Input voltage range
90 – 264 VAC or 120 – 370 VDC
Input frequency
47 – 440 Hz
Input current full load
220 mA @ 115 VAC / 150 mA @ 230 VAC
External fuse (recommended)
1.5 A slow blow type
Output Specifications
Voltage set accuracy
Regulation
±2%
– Input variation
0.3 % max.
– Load variation (5– 100%)
0.5 % max.
Minimum load
0%
Ripple and noise (20 MHz Bandwidth)
– 3.3 & 5 VDC output models:
< 1.5 % of Vout
– other models:
< 1.0 % of Vout
Over voltage protection
Zener diode clamp
Current limitation
> 120 % fold back
Short circuit protection
hiccup mode, indefinite (automatic recovery)
Maximum capacitive load
10’000 µF
General Specifications
Temperature ranges – Operating
– Power derating above 50°C
– Storage (non operating)
– 25 °C…+71 °C
3.75 %/°C
– 40 °C…+85 °C
Temperature coefficient
0.02 % / °C
Efficiency
80 % (depending on model)
Humidity (non condensing)
95 % rel max.
Switching frequency
125 kHz typ. (Puls width modulation PWM)
Hold-up time
15 ms min.
Isolation voltage
– Input/ Output
3‘000 VAC
Reliability /calculated MTBF (MIL-HDBK-217E)
t.b.a.
EMI / RFI conducted
EN 55022, class B
EMC compliance
– Electrostatic discharge ESD
IEC / EN 61000-4-2
4 kV / 8 kV
– RF field susceptibility
– Electrical fast transients / bursts on mainsline
IEC / EN 61000-4-3
IEC / EN 61000-4-4
3 V/m
1 kV
Safety Class ll
to IEC / EN 60536
Safety standards
UL 60950, IEC 60950, EN 60950
Safety approval
cUL / UL File E188913
Case material
Plastic resin + Fiberglass (UL 94V-0 - rated)
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
http://www.tracopower.com
Page 2 of 3
Encapsulated Power Supply
TMLM Series
10 Watt
- Vout
(0.4 ±0.012)
(0.8 ±0.012)
AC in
Bottom view
10.16 ±0.3
3.4
(0.13)
20.32 ±0.3
27.2
(1.07)
Outline Dimensions mm (inches)
+Vout
AC in
45.72 ±0.3
(1.80 ±0.012)
3.4
23.0
10
(0.13)
(0.91)
(0.39)
52.4
(2.06)
Pin diameter ø 1.0 mm
Weight:
( ) = Inches
Tolerances = 0.5mm (0.02)
30 g (1.1 oz)
Specifications can be changed without notice
Rev. 03/05
Jenatschstrasse 1 • CH-8002 Zurich • Switzerland
Tel. +41 43311 4511 • Fax +41 43311 4545 • [email protected]
•
www.tracopower.com
Page 3 of 3