TLE2141, TLE2141A, TLE2141Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS SLOS062D – NOVEMBER 1990 – REVISED AUGUST 1994 • • • Low Noise 10 Hz . . . 15 nV/√Hz 1 kHz . . . 10.5 nV/√Hz 10 000-pF Load Capability 20-mA Min Short-Circuit Output Current 27-V/µs Min Slew Rate High Gain-Bandwidth Product . . . 5.9 MHz Low VIO . . . 500 µV Max at 25°C • • • • • • • Single or Split Supply . . . 4 V to 44 V Fast Settling Time 340 ns to 0.1% 400 ns to 0.01% Saturation Recovery . . . 150 ns Large Output Swing VCC – + 0.1 V to VCC + – 1 V SLEW RATE vs LOAD CAPACITANCE EQUIVALENT INPUT NOISE VOLTAGE vs FREQUENCY Vn – Equivalent Input Noise Voltage – nV/ Hz 50 SR – Slew Rate – V/xs V/µ s 40 SR + 30 20 SR – 10 VCC± = ± 15 V AVD = – 1 TA = 25°C 0 0.01 250 VCC ± = ± 15 V RS = 20 Ω 200 TA = – 55°C 150 TA = 125°C 100 TA = 25°C 50 0 0.1 1 10 1 10 CL – Load Capacitance – nF 10 k 1k 100 f – Frequency – Hz description The TLE2141 and TLE2141A devices are high-performance, internally compensated operational amplifiers built using Texas Instruments complementary bipolar Excalibur process. The TLE2141A is a tighter offset voltage grade of the TLE2141. Both are pin-compatible upgrades to standard industry products. AVAILABLE OPTIONS TA VIOmax AT 25°C 0°C to 70°C 500 µV 900 µV – 40°C to 105°C – 55°C to 125°C PACKAGED DEVICES SMALL OUTLINE (D) PLASTIC DIP (P) CHIP FORM (Y) CHIP CARRIER (FK) CERAMIC DIP (JG) TLE2141ACD TLE2141CD — — TLE2141ACP TLE2141CP — 500 µV 900 µV TLE2141AID TLE2141ID — — TLE2141AIP TLE2141IP TLE2141Y 500 µV 900 µV TLE2141AMD TLE2141MD TLE2141AMFK TLE2141MFK TLE2141AMJG TLE2141MJB TLE2141AMP TLE2141MP — The D packages are available taped and reeled. Add R suffix to device type (e.g., TLE2141ACDR). Copyright 1994, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. On products compliant to MIL-STD-883, Class B, all parameters are tested unless otherwise noted. On all other products, production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 5–1 TLE2141, TLE2141A, TLE2141Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS SLOS062D – NOVEMBER 1990 – REVISED AUGUST 1994 description (continued) The design incorporates an input stage that simultaneously achieves low audio-band noise of 10.5 nV/√Hz with a 10-Hz 1/f corner and symmetrical 40-V/µs slew rate typically with loads up to 800 pF. The resulting low distortion and high power bandwidth are important in high-fidelity audio applications. A fast settling time of 340 ns to 0.1% of a 10-V step with a 2-kΩ/100-pF load is useful in fast actuator/positioning drivers. Under similar test conditions, settling time to 0.01% is 400 ns. The devices are stable with capacitive loads up to 10 nF, although the 6-MHz bandwidth decreases to 1.8 MHz at this high loading level. As such, the TLE2141 and TLE2141A are useful for low-droop sample-and-holds and direct buffering of long cables, including 4-mA to 20-mA current loops. The special design also exhibits an improved insensitivity to inherent integrated circuit component mismatches as is evidenced by a 500-µV maximum offset voltage and 1.7-µV/°C typical drift. Minimum common-mode rejection ratio and supply-voltage rejection ratio are 85 dB and 90 dB, respectively. Device performance is relatively independent of supply voltage over the ± 2-V to ± 22-V range. Inputs can operate between VCC – – 0.3 to VCC + – 1.8 V without inducing phase reversal, although excessive input current may flow out of each input exceeding the lower common-mode input range. The all-npn output stage provides a nearly rail-to-rail output swing of VCC – – 0.1 to VCC + – 1 V under light current-loading conditions. The device can sustain shorts to either supply since output current is internally limited, but care must be taken to ensure that maximum package power dissipation is not exceeded. Both versions can also be used as comparators. Differential inputs of VCC ± can be maintained without damage to the device. Open-loop propagation delay with TTL supply levels is typically 200 ns. This gives a good indication as to output stage saturation recovery when the device is driven beyond the limits of recommended output swing. Both the TLE2141 and TLE2141A are available in a wide variety of packages, including both the industry-standard 8-pin small-outline version and chip form for high-density system applications. The C-suffix devices are characterized for operation from 0°C to 70°C, I-suffix devices from – 40°C to 105°C, and M-suffix devices over the full military temperature range of – 55°C to 125°C. D, JG, OR P PACKAGE (TOP VIEW) 1 8 2 7 3 6 4 5 NC OFFSET N1 NC NC NC OFFSET N1 IN – IN + VCC – FK PACKAGE (TOP VIEW) NC VCC + OUT OFFSET N2 4 3 2 1 20 19 18 5 17 6 16 7 15 8 14 9 10 11 12 13 NC VCC – NC OFFSET N2 NC NC IN – NC IN + NC NC – No internal connection 5–2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 NC VCC + NC OUT NC TLE2141, TLE2141A, TLE2141Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS SLOS062D – NOVEMBER 1990 – REVISED AUGUST 1994 symbol OFFSET N1 IN + + IN – – OUT OFFSET N2 TLE2141Y chip information This chip, when properly assembled, displays characteristics similar to the TLE2141. Thermal compression or ultrasonic bonding may be used on the doped-aluminum bonding pads. Chips may be mounted with conductive epoxy or a gold-silicon preform. BONDING PAD ASSIGNMENTS (7) (6) OFFSET N1 IN + (1) (3) (2) IN – (5) OFFSET N2 (5) VCC+ (7) + (6) OUT – (4) VCC – 64 CHIP THICKNESS: 15 TYPICAL BONDING PADS: 4 × 4 MINIMUM (1) TJmax = 150°C (4) TOLERANCES ARE ± 10%. ALL DIMENSIONS ARE IN MILS. (2) (3) 65 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 5–3 5–4 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 Q2 Q4 D1 Q7 Q6 R3 R5 36 1 8 24 4 Q12 Q11 R6 Q10 Q9 R4 C1 Q5 Q8 COMPONENT COUNT (total device) Q1 Transistors Epi-FET Diodes Resistors Capacitors OFFSET N2 OFFSET N1 IN + IN – R2 Q3 R1 equivalent schematic Q14 D2 R9 Q17 R10 Q16 Q15 R8 Q13 R7 R11 C2 VCC – Q18 Q19 VCC + R12 Q20 C3 R13 D4 Q21 C4 D3 Q22 R14 Q24 D5 Q25 R16 R15 Q23 Q29 D7 D6 Q28 R17 Q27 Q26 R18 D8 R20 Q33 Q32 Q31 Q30 R19 R22 Q35 Q36 R23 Q34 R21 Q37 OUT R24 TLE2141, TLE2141A, TLE2141Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFICATIONS SLOS062D – NOVEMBER 1990 – REVISED AUGUST 1994 TLE2141, TLE2141A, TLE2141Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS SLOS062D – NOVEMBER 1990 – REVISED AUGUST 1994 absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage, VCC + (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 V Supply voltage, VCC – . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 22 V Differential input voltage, VID (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 44 V Input voltage range, VI (any input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VCC + to VCC – – 0.3 V Input current, II (each input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 1 mA Output current, IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 80 mA Total current into VCC + . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 mA Total current out of VCC – . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 mA Duration of short-circuit current at (or below) 25°C (see Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . unlimited Continuous total dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table Operating free-air temperature range, TA: C suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C I suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 40°C to 105°C M suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 55°C to 125°C Storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 65°C to 150 °C Case temperature for 60 seconds: FK package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: D or P package . . . . . . . . . . . . . . . . . 260°C Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds: JG package . . . . . . . . . . . . . . . . . . . . 300°C † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. All voltage values, except differential voltages, are with respect to the midpoint between VCC+ and VCC – . 2. Differential voltages are at IN+ with respect to IN –. Excessive current flows if input is brought below VCC – – 0.3 V. 3. The output may be shorted to either supply. Temperature and /or supply voltages must be limited to ensure that the maximum dissipation rating is not exceeded. DISSIPATION RATING TABLE PACKAGE TA ≤ 25°C POWER RATING DERATING FACTOR ABOVE TA = 25°C TA = 70°C POWER RATING TA = 105°C POWER RATING TA = 125°C POWER RATING D 725 mW 5.8 mW/°C 464 mW 261 mW 145 mW FK 1375 mW 11.0 mW/°C 880 mW 495 mW 275 mW JG 1050 mW 8.4 mW/°C 672 mW 378 mW 210 mW P 1000 mW 8.0 mW/°C 640 mW 360 mW 200 mW recommended operating conditions Supply voltage, VCC ± Common-mode input voltage voltage, VIC VCC = 5 V VCC ± = ± 15 V Operating free-air temperature, TA POST OFFICE BOX 655303 C SUFFIX I SUFFIX M SUFFIX MIN MAX MIN MAX MIN MAX ±2 ± 22 ±2 ± 22 ±2 ± 22 0 2.9 0 2.7 0 2.7 – 15 12.9 – 15 12.7 – 15 12.7 0 70 – 40 105 – 55 125 • DALLAS, TEXAS 75265 UNIT V V °C 5–5 TLE2141, TLE2141A, TLE2141Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS SLOS062D – NOVEMBER 1990 – REVISED AUGUST 1994 electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted) PARAMETER VIO Input offset voltage αVIO Temperature coefficient of input offset voltage IIO Input offset current IIB Input bias current VICR Common mode C Common-mode d input i voltage g range g Hi h l High-level l output voltage l 25°C VO = 2.5 2 5 V, V VIC = 2.5 V RS = 50 Ω Ω, MAX 225 1400 8 – 0.8 Full range 25°C 0 to 3 F ll range Full g 0 to 2.9 25°C 3.9 Full range 3.8 25°C 3.8 Full range 3.7 25°C 3.2 Full range 3.2 1000 1300 100 8 – 0.8 4.1 3.9 – 0.3 to 3.2 3.8 4 3.7 3.2 1.2 Full range 3.7 125 75 150 225 mV V 250 1.6 220 125 150 225 1.2 1.7 25 V 3.2 250 50 V 3.7 Full range 25°C µA 4.1 150 Full range –2 nA 3.8 4 150 25°C 100 – 2.1 0 to 3 µV µV/°C 150 –2 UNIT 0 to 2.9 75 25°C VCC = ± 2.5 V, RL = 2 kΩ, VO = 1 V to – 1.5 V 200 17 1.7 – 0.3 to 3.2 Full range IOL = 15 mA MAX – 2.1 25°C IOL = 1 1.5 5 mA TYP 150 25°C IOH = – 1.5 1 5 mA MIN 17 1.7 Full range IOL = 150 µA L Low-level l l output voltage l Full range RS = 50 Ω TLE2141AC TYP 1700 25°C IOH = – 15 mA VOL TLE2141C MIN Full range IOH = – 150 µA VOH TA† TEST CONDITIONS 1.6 1.7 50 220 V AVD Large signal differential Large-signal voltage amplification ri Input resistance 25°C 70 70 MΩ ci Input capacitance 25°C 2.5 2.5 pF zo Open-loop output impedance f = 1 MHz 25°C 30 30 Ω CMRR Common mode Common-mode rejection ratio VIC = VICRmin min, RS = 50 Ω kSVR Supply-voltage Supply voltage rejection ratio (∆VCC ± /∆VIO) VCC ± = ± 2.5 V to ± 15 V, RS = 50 Ω ICC Supply current VO = 2.5 V, VIC = 2.5 V Full range 25°C 85 Full range 80 25°C 90 Full range 85 25°C No load, † Full range is 0°C to 70°C. 5–6 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 V/mV 25 118 85 118 dB 80 106 90 106 dB 85 3.4 4.4 4.6 3.4 4.4 4.6 mA TLE2141, TLE2141A, TLE2141Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS SLOS062D – NOVEMBER 1990 – REVISED AUGUST 1994 operating characteristics, VCC = 5 V, TA = 25°C PARAMETER TEST CONDITIONS† SR + Positive slew rate SR – Negative slew rate ts Settling time Vn Equivalent input noise voltage VN(PP) Peak to peak equivalent input Peak-to-peak noise voltage In Equivalent input noise current THD + N Total harmonic distortion plus noise VO = 1 V to 3 V, AVD = 2, RL = 2 kΩ, f = 10 kHz B1 Unity-gain bandwidth kΩ RL = 2 kΩ, Gain-bandwidth product Maximum output output-swing swing bandwidth BOM φm Phase margin at unity gain † RL and CL terminated to 2.5 V. TLE2141C MIN TYP TLE2141AC MAX MIN TYP 45 45 42 42 To 0.1% 0.16 0.16 To 0.01% 0.22 0.22 f = 10 Hz 15 15 f = 1 kHz 10.5 10.5 AVD = – 1, CL = 500 pF RL = 2 kΩ, AVD = – 1, 2.5-V step RS = 20 Ω, RS = 20 Ω, MAX UNIT V/µs µs nV/√Hz f = 0.1 Hz to 1 Hz 0.48 0.48 f = 0.1 Hz to 10 Hz 0.51 0.51 f = 10 Hz 1.92 1.92 f = 1 kHz 0.5 0.5 0 0052% 0.0052% 0 0052% 0.0052% CL = 100 pF 59 5.9 59 5.9 MHz RL = 2 kΩ, f = 100 kHz CL = 100 pF, 58 5.8 58 5.8 MHz VO(PP) = 2 V, AVD = 1, RL = 2 kΩ, CL = 100 pF 660 660 kHz RL = 2 kΩ, CL = 100 pF 57° 57° POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 µV pA/√Hz 5–7 TLE2141, TLE2141A, TLE2141Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS SLOS062D – NOVEMBER 1990 – REVISED AUGUST 1994 electrical characteristics at specified free-air temperature, VCC ± = ±15 V (unless otherwise noted) PARAMETER VIO Input offset voltage αVIO Temperature coefficient of input offset voltage IIO Input offset current IIB Input bias current VICR Common mode C Common-mode d input i voltage g range g RS = 50 Ω Ω, 0 VIC = 0, VO = 0 200 Full range 7 – 0.7 Full range Large signal differential Large-signal voltage amplification VO = ± 10 V ri Input resistance RL = 2 kΩ ci Input capacitance zo Open-loop output impedance f = 1 MHz CMRR Common mode Common-mode rejection ratio VIC = VICRmin min, kSVR Supply-voltage rejection ratio (∆VCC ± /∆VIO) VCC ± = ± 2.5 V to ± 15 V, RS = 50 Ω IOS Short-circuit Short circuit output current VO = 0 VID = 1 V VID = – 1 V ICC Supply current VO = 0, 0 No load RS = 50 Ω 500 800 100 7 – 0.7 – 15 to 13 – 15.3 to 13.2 F ll range Full g – 15 to 12.9 – 15.3 to 13.1 – 15 to 12.9 – 15.3 to 13.1 25°C 13.8 14.1 13.8 14.1 Full range 13.7 25°C 13.7 Full range 13.6 25°C 13.1 Full range – 14.6 25°C – 14.5 Full range – 14.4 25°C – 13.4 Full range – 13.3 25°C 100 Full range 75 µV nA µA V 13.7 14 13.7 14 V 13.6 13.7 13.1 13 – 14.7 – 1.5 – 1.6 – 15.3 to 13.2 25°C 100 150 – 1.5 UNIT µV/°C 17 1.7 – 1.6 13.7 13 – 14.9 – 14.7 – 14.9 – 14.6 – 14.8 – 14.5 – 14.8 V – 14.4 – 13.8 – 13.4 – 13.8 – 13.3 450 100 450 V/mV 75 25°C 65 65 MΩ 25°C 2.5 2.5 pF 25°C 30 30 Ω 25°C 85 Full range 80 25°C 90 Full range 85 108 85 108 dB 80 106 90 106 dB 25°C – 50 – 25 – 50 20 31 20 31 25°C Full range POST OFFICE BOX 655303 85 – 25 † Full range is 0°C to 70°C. 5–8 175 – 15 to 13 Full range AVD MAX 25°C RS = 50 Ω IO = 15 mA 900 TYP 150 25°C IO = 1 1.5 5 mA MIN 17 1.7 Full range IO = – 1.5 1 5 mA TLE2141AC MAX 1300 25°C IO = 150 µA VOM – TYP 25°C IO = – 15 mA Maximum M i negative i peak output voltage swing TLE2141C MIN Full range IO = – 150 µA M i Maximum positive i i peak k VOM + output voltage swing TA† TEST CONDITIONS • DALLAS, TEXAS 75265 3.5 4.5 4.7 3.5 mA 4.5 4.7 mA TLE2141, TLE2141A, TLE2141Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS SLOS062D – NOVEMBER 1990 – REVISED AUGUST 1994 operating characteristics, VCC± = ±15 V, TA = 25°C PARAMETER TEST CONDITIONS SR + Positive slew rate SR – Negative slew rate ts Settling time Vn Equivalent input noise voltage VN(PP) Peak to peak equivalent input Peak-to-peak noise voltage In Equivalent input noise current THD + N Total harmonic distortion plus noise VO(PP) = 20 V, AVD = 10, RL = 2 kΩ, f = 10 kHz B1 Unity-gain bandwidth RL = 2 kΩ, Gain-bandwidth product RL = 2 kΩ, f = 100 kHz BOM Maximum output output-swing swing bandwidth φm Phase margin at unity gain AVD = – 1, CL = 500 pF RL = 2 kΩ, AVD = – 1, 10-V step To 0.1% TLE2141C MIN TYP 27 27 TLE2141AC MAX MIN TYP 45 27 45 42 27 42 MAX UNIT V/µs 0.34 0.34 To 0.01% 0.4 0.4 RS = 20 Ω, f = 10 Hz 15 15 RS = 20 Ω, f = 1 kHz 10.5 10.5 f = 0.1 Hz to 1 Hz 0.48 0.48 f = 0.1 Hz to 10 Hz 0.51 0.51 f = 10 Hz 1.89 1.89 f = 1 kHz 0.47 0.47 0 01% 0.01% 0 01% 0.01% CL = 100 pF 6 6 MHz CL = 100 pF, 59 5.9 59 5.9 MHz VO(PP) = 20 V, AVD = 1, RL = 2 kΩ, CL = 100 pF 668 668 kHz RL = 2 kΩ, CL = 100 pF 58° 58° POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 µs nV/√Hz µV pA/√Hz 5–9 TLE2141, TLE2141A, TLE2141Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS SLOS062D – NOVEMBER 1990 – REVISED AUGUST 1994 electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted) PARAMETER VIO Input offset voltage αVIO Temperature coefficient of input offset voltage IIO Input offset current IIB Input bias current VICR Common mode C Common-mode d input i voltage g range g TA† TEST CONDITIONS 25°C 2 5 V, V VO = 2.5 VIC = 2.5 V RS = 50 Ω Ω, Hi h l High-level l output voltage l Full range L Low-level l l output voltage l 225 1400 8 – 0.8 Full range MAX 200 1000 1500 100 8 – 0.8 – 2.2 – 0.3 to 3.2 0 to 3 – 0.3 to 3.2 F ll range Full g 0 to 2.7 – 0.3 to 2.9 0 to 2.7 – 0.3 to 2.9 3.9 4.1 3.9 4.1 3.8 4 3.8 4 3.2 3.7 3.2 3.7 25°C Full range 3.8 3.8 3.7 3.7 3.3 25°C 10 µA 3.3 75 125 150 225 150 225 1.6 1.2 IOL = 10 mA 50 nA V 125 Full range 25°C µV V 75 1.2 Full range –2 – 2.2 0 to 3 IOH = – 15 mA IOH = – 100 µA 100 200 –2 UNIT µV/°C 17 1.7 25°C RS = 50 Ω VCC = ± 2.5 V, RL = 2 kΩ, VO = 1 V to – 1.5 V TYP 200 25°C IOL = 15 mA IOL = 100 µA IOL = 1 mA MIN 17 1.7 Full range IOL = 150 µA IOL = 1.5 µA VOL MAX 1900 25°C IOH = – 1 mA IOH = – 10 mA TLE2141AI TYP Full range IOH = – 150 µA IOH = – 1.5 mA VOH TLE2141I MIN 1.6 175 175 225 225 1.4 1.4 220 50 220 mV V mV V AVD Large signal differential Large-signal voltage amplification ri Input resistance 25°C 70 70 MΩ ci Input capacitance 25°C 2.5 2.5 pF zo Open-loop output impedance f = 1 MHz 25°C 30 30 Ω CMRR Common mode Common-mode rejection ratio VIC = VICRmin, min RS = 50 Ω kSVR Supply-voltage Supply voltage rejection ratio (∆VCC ± /∆VIO) VCC ± = ± 2.5 V to ± 15 V, RS = 50 Ω ICC Supply current VO = 2.5 V, VIC = 2.5 V Full range 25°C 85 Full range 80 25°C 90 Full range 85 25°C No load, † Full range is – 40°C to 105°C. 5–10 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 V/mV 10 118 85 118 dB 80 106 90 106 dB 85 3.4 4.4 4.6 3.4 4.4 4.6 mA TLE2141, TLE2141A, TLE2141Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS SLOS062D – NOVEMBER 1990 – REVISED AUGUST 1994 operating characteristics, VCC = 5 V, TA = 25°C PARAMETER SR + Positive slew rate SR – Negative slew rate ts Settling time Vn Equivalent input noise voltage VN(PP) Peak to peak equivalent input Peak-to-peak noise voltage In Equivalent input noise current THD + N Total harmonic distortion plus noise B1 Unity-gain bandwidth BOM TEST CONDITIONS† TLE2141I MIN TYP TLE2141AI MAX MIN TYP 45 45 42 42 To 0.1% 0.16 0.16 To 0.01% 0.22 0.22 f = 10 Hz 15 15 f = 1 kHz 10.5 10.5 AVD = – 1, CL = 500 pF RL = 2 kΩ, AVD = – 1, 2.5-V step RS = 20 Ω, RS = 20 Ω, f = 0.1 Hz to 1 Hz 0.48 0.48 f = 0.1 Hz to 10 Hz 0.51 0.51 f = 10 Hz 1.92 1.92 f = 1 kHz 0.5 0.5 0 0052% 0.0052% 0 0052% 0.0052% MAX UNIT V/µs µs nV/√Hz µV pA/√Hz VO = 1 V to 3 V, AVD = 2, RL = 2 kΩ, RL = 2 kΩ, f = 10 kHz CL = 100 pF 5.9 5.9 MHz Gain-bandwidth product RL = 2 kΩ, f = 100 kHz CL = 100 pF, 58 5.8 58 5.8 MHz Maximum output-swing bandwidth VO(PP) = 2 V, AVD = 1, RL = 2 kΩ, CL = 100 pF 660 660 kHz RL = 2 kΩ, CL = 100 pF 57° 57° φm Phase margin at unity gain † RL and CL terminated to 2.5 V. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 5–11 TLE2141, TLE2141A, TLE2141Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS SLOS062D – NOVEMBER 1990 – REVISED AUGUST 1994 electrical characteristics at specified free-air temperature, VCC ± = ±15 V (unless otherwise noted) PARAMETER VIO Input offset voltage αVIO Temperature coefficient of input offset voltage IIO Input offset current IIB Input bias current VICR Common mode C Common-mode d input i voltage g range g TA† TEST CONDITIONS 25°C Ω RS = 50 Ω, 0 VIC = 0, VO = 0 TLE2141AI MAX 900 TYP 175 7 25°C – 0.7 100 7 – 1.5 – 0.7 – 1.7 – 15.3 to 13.2 – 15 to 13 – 15.3 to 13.2 F ll range Full g – 15 to 12.7 – 15.3 to 12.9 – 15 to 12.7 – 15.3 to 12.9 13.8 14.1 13.8 14.1 13.7 14 13.7 14 13.1 13.7 13.1 13.7 25°C IO = – 15 mA IO = – 100 µA Full g F ll range 13.7 13.7 13.6 13.6 13.1 IO = 150 µA IO = 1.5 mA 25°C IO = 15 mA IO = 100 µA Full g F ll range – 14.9 – 14.7 – 14.9 – 14.5 – 14.8 – 14.5 – 14.8 – 13.4 – 13.8 – 13.4 – 13.8 – 14.6 – 14.6 – 14.5 – 14.5 – 13.4 100 Full range 40 µV – 1.5 nA µA V V 13.1 – 14.7 25°C 100 – 1.7 – 15 to 13 UNIT µV/°C 200 25°C RS = 50 Ω 500 17 1.7 200 Full range MAX 1000 17 1.7 25°C IO = 1 mA IO = 10 mA MIN 1500 Full range IO = – 1 mA IO = – 10 mA M i Maximum negative i peak k output voltage swing 200 Full range m VOM – TYP Full range IO = – 150 µA IO = – 1.5 A M i i i peak k Maximum positive VOM + output voltage swing TLE2141I MIN V – 13.4 450 100 450 AVD Large signal differential Large-signal voltage amplification ri Input resistance 25°C 65 65 MΩ ci Input capacitance 25°C 2.5 2.5 pF zo Open-loop output impedance f = 1 MHz 25°C 30 30 Ω CMRR Common mode Common-mode rejection ratio VIC = VICRmin, min RS = 50 Ω kSVR Supply voltage rejection Supply-voltage ratio (∆VCC ± /∆VIO) VCC ± = ± 2.5 V to ± 15 V, RS = 50 Ω IOS Short circuit output Short-circuit current VO = 0 VID = 1 V VID = – 1 V ICC Supply current VO = 0 0, No load VO = ± 10 V V, RL = 2 kΩ 25°C 85 Full range 80 25°C 90 Full range 85 25°C 108 106 90 106 dB 85 – 25 – 50 31 20 31 • DALLAS, TEXAS 75265 dB 80 – 50 25°C POST OFFICE BOX 655303 85 20 † Full range is – 40°C to 105°C. 5–12 108 – 25 Full range V/mV 40 3.5 4.5 4.7 3.5 mA 4.5 4.7 mA TLE2141, TLE2141A, TLE2141Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS SLOS062D – NOVEMBER 1990 – REVISED AUGUST 1994 operating characteristics, VCC± = ±15 V, TA = 25°C PARAMETER TEST CONDITIONS SR + Positive slew rate SR – Negative slew rate ts Settling time Vn Equivalent input noise voltage VN(PP) Peak to peak equivalent input Peak-to-peak noise voltage In Equivalent input noise current THD + N Total harmonic distortion plus noise VO(PP) = 20 V, AVD = 10, RL = 2 kΩ, f = 10 kHz B1 Unity-gain bandwidth RL = 2 kΩ kΩ, Gain-bandwidth product BOM φm TLE2141I MIN TYP 27 27 TLE2141AI MAX MIN TYP 45 27 45 42 27 42 AVD = – 1, CL = 500 pF RL = 2 kΩ, AVD = – 1, 10-V step To 0.1% 0.34 0.34 To 0.01% 0.4 0.4 RS = 20 Ω, f = 10 Hz 15 15 RS = 20 Ω, f = 1 kHz 10.5 10.5 MAX UNIT V/µs µs nV/√Hz f = 0.1 Hz to 1 Hz 0.48 0.48 f = 0.1 Hz to 10 Hz 0.51 0.51 f = 10 Hz 1.89 1.89 f = 1 kHz 0.47 0.47 0 01% 0.01% 0 01% 0.01% CL = 100 pF 6 6 MHz RL = 2 kΩ, f = 100 kHz CL = 100 pF, 59 5.9 59 5.9 MHz Maximum output output-swing swing bandwidth VO(PP) = 20 V, AVD = 1, RL = 2 kΩ, CL = 100 pF 668 668 kHz Phase margin at unity gain RL = 2 kΩ, CL = 100 pF 58° 58° POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 µV pA/√Hz 5–13 TLE2141, TLE2141A, TLE2141Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS SLOS062D – NOVEMBER 1990 – REVISED AUGUST 1994 electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted) PARAMETER VIO Input offset voltage αVIO Temperature coefficient of input offset voltage IIO Input offset current IIB Input bias current VICR Common mode C Common-mode d input i voltage g range g TA† TEST CONDITIONS 25°C RS = 50 Ω Ω, VO = 2.5 2 5 V, V VIC = 2.5 V VOH Full range Low level L Low-level l l output voltage 225 1400 8 – 0.8 Full range MAX 200 1000 1700 100 8 – 0.8 – 2.3 – 0.3 to 3.2 0 to 3 – 0.3 to 3.2 F ll range Full g 0 to 2.7 – 0.3 to 2.9 0 to 2.7 – 0.3 to 2.9 3.9 4.1 3.9 4.1 3.8 4 3.8 4 3.2 3.7 3.2 3.7 25°C Full range 3.75 3.75 3.65 3.65 3.25 25°C IOL = 15 mA IOL = 100 µA 50 5 nA µA V 3.25 125 75 125 150 225 150 225 1.4 1.2 Full range 25°C µV V 75 1.2 Full range –2 – 2.3 0 to 3 IOH = – 15 mA IOH = – 100 µA 100 250 –2 UNIT µV/°C 17 1.7 25°C RS = 50 Ω VIC = ± 2.5 V, RL = 2 kΩ, VO = 1 V to – 1.5 V TYP 250 25°C IOL = 1 mA IOL = 10 mA MIN 17 1.7 Full range IOL = 150 µA IOL = 1.5 µA VOL MAX 2100 25°C IOH = – 1 mA IOH = – 10 mA TLE2141AM TYP Full range IOH = – 150 µA IOH = – 1.5 mA High Hi High-level h level l l output voltage TLE2141M MIN 1.4 200 200 250 225 1.25 1.25 220 50 220 mV V mV V AVD Large signal differential Large-signal voltage amplification ri Input resistance 25°C 70 70 MΩ ci Input capacitance 25°C 2.5 2.5 pF zo Open-loop output impedance f = 1 MHz 25°C 30 30 Ω CMRR Common mode Common-mode rejection ratio VIC = VICRmin min, kSVR Supply-voltage Supply voltage rejection ratio (∆VCC ± /∆VIO) VCC ± = ± 2.5 V to ± 15 V, RS = 50 Ω ICC Supply current VO = 2.5 V, VIC = 2.5 V Full range RS = 50 Ω 25°C 85 Full range 80 25°C 90 Full range 85 25°C No load, † Full range is – 55°C to 125°C. 5–14 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 V/mV 5 118 85 118 dB 80 106 90 106 dB 85 3.4 4.4 4.6 3.4 4.4 4.6 mA TLE2141, TLE2141A, TLE2141Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS SLOS062D – NOVEMBER 1990 – REVISED AUGUST 1994 operating characteristics, VCC = 5 V, TA = 25°C PARAMETER TEST CONDITIONS† SR + Positive slew rate SR – Negative slew rate ts Settling time Vn Equivalent input noise voltage VN(PP) Peak to peak equivalent input Peak-to-peak noise voltage In Equivalent input noise current THD + N Total harmonic distortion plus noise VO = 1 V to 3 V, AVD = 2, RL = 2 kΩ, f = 10 kHz B1 Unity-gain bandwidth RL = 2 kΩ, Gain-bandwidth product Maximum output-swing bandwidth BOM φm Phase margin at unity gain † RL and CL terminated to 2.5 V. TLE2141M MIN TYP TLE2141AM MAX MIN TYP MAX UNIT 45 45 42 42 To 0.1% 0.16 0.16 To 0.01% 0.22 0.22 RS = 20 Ω, f = 10 Hz 15 15 RS = 20 Ω, f = 1 kHz 10.5 10.5 f = 0.1 Hz to 1 Hz 0.48 0.48 f = 0.1 Hz to 10 Hz 0.51 0.51 f = 10 Hz 1.92 1.92 f = 1 kHz 0.5 0.5 0.0052% 0.0052% CL = 100 pF 5.9 5.9 MHz RL = 2 kΩ, f = 100 kHz CL = 100 pF, 5.8 5.8 MHz VO(PP) = 2 V, AVD = 1 RL = 2 kΩ, 660 660 kHz RL = 2 kΩ, CL = 100 pF 57° 57° AVD = – 1, CL = 500 pF RL = 2 kΩ, AVD = – 1, 2.5-V step POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 V/µs µs nV/√Hz µV pA/√Hz 5–15 TLE2141, TLE2141A, TLE2141Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS SLOS062D – NOVEMBER 1990 – REVISED AUGUST 1994 electrical characteristics at specified free-air temperature, VCC ± = ±15 V (unless otherwise noted) PARAMETER VIO Input offset voltage αVIO Temperature coefficient of input offset voltage Input offset current IIB Input bias current VICR Common mode C Common-mode d input i voltage g range g TLE2141AM MAX 900 TYP 175 7 25°C Full range 100 7 – 1.5 – 0.7 – 1.8 – 15.3 to 13.2 – 15 to 13 – 15.3 to 13.2 F ll range Full g – 15 to 12.7 – 15.3 to 12.9 – 15 to 12.7 – 15.3 to 12.9 13.8 14.1 13.8 14.1 13.7 14 13.7 14 13.1 13.7 13.1 13.7 25°C IO = – 15 mA IO = – 100 µA Full g F ll range 13.7 13.7 13.6 13.6 13.1 IO = 150 µA IO = 1.5 mA 25°C IO = 15 mA IO = 100 µA Full range – 14.9 – 14.7 – 14.9 – 14.5 – 14.8 – 14.5 – 14.8 – 13.4 – 13.8 – 13.4 – 13.8 – 14.6 – 14.6 – 14.5 – 14.5 – 13.4 – 13.4 25°C 100 20 µV – 1.5 nA µA V V 13.1 – 14.7 Full range 100 – 1.8 – 15 to 13 UNIT µV/°C 250 25°C RS = 50 Ω 500 17 1.7 250 – 0.7 MAX 1200 17 1.7 25°C IO = 1 mA IO = 10 mA MIN 1700 Full range IO = – 1 mA IO = – 10 mA VOM – 200 Full range =550 0 Ω RS = m Maximum M i negative i peak output voltage swing TYP 25°C IO = – 150 µA IO = – 1.5 A M i Maximum positive i i peak k VOM + output voltage swing TLE2141M MIN Full range 0 VIC = 0, IIO TA† TEST CONDITIONS 450 100 V 450 AVD Large signal differential Large-signal voltage amplification ri Input resistance 25°C 65 65 MΩ ci Input capacitance 25°C 2.5 2.5 pF zo Open-loop output impedance f = 1 MHz 25°C 30 30 Ω CMRR Common mode Common-mode rejection ratio VIC = VICRmin min, kSVR Supply-voltage rejection ratio (∆VCC ± /∆VIO) VCC ± = ± 2.5 V to ± 15 V, RS = 50 Ω IOS Short-circuit Short circuit output current VO = 0 ICC Supply current VO = 0, VIC = 2.5 V VO = ± 10 V V, RL = 2 kΩ RS = 50 Ω 25°C 85 Full range 80 25°C 90 Full range 85 108 85 108 dB 80 106 90 106 dB VID = 1 V VID = – 1 V 25°C No load, 25°C – 50 – 25 – 50 20 31 20 31 Full range POST OFFICE BOX 655303 85 – 25 † Full range is – 55°C to 125°C. 5–16 V/mV 20 • DALLAS, TEXAS 75265 3.5 4.5 4.7 3.5 mA 4.5 4.7 mA TLE2141, TLE2141A, TLE2141Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS SLOS062D – NOVEMBER 1990 – REVISED AUGUST 1994 operating characteristics, VCC± = ±15 V, TA = 25°C PARAMETER TEST CONDITIONS SR + Positive slew rate SR – Negative slew rate ts Settling time Vn Equivalent input noise voltage VN(PP) Peak to peak equivalent input Peak-to-peak noise voltage In Equivalent input noise current THD + N Total harmonic distortion plus noise VO(PP) = 20 V, AVD = 10, RL = 2 kΩ, f = 10 kHz B1 Unity-gain bandwidth RL = 2 kΩ kΩ, Gain-bandwidth product BOM φm TLE2141M MIN TYP 27 27 TLE2141AM MAX MIN TYP 45 27 45 42 27 42 AVD = – 1, CL = 100 pF RL = 2 kΩ, AVD = – 1, 10-V step To 0.1% 0.34 0.34 To 0.01% 0.4 0.4 RS = 20 Ω, f = 10 Hz 15 15 RS = 20 Ω, f = 1 kHz 10.5 10.5 MAX UNIT V/µs µs nV/√Hz f = 0.1 Hz to 1 Hz 0.48 0.48 f = 0.1 Hz to 10 Hz 0.51 0.51 f = 10 Hz 1.89 1.89 f = 1 kHz 0.47 0.47 0 01% 0.01% 0 01% 0.01% CL = 100 pF 6 6 MHz RL = 2 kΩ, f = 100 kHz CL = 100 pF, 59 5.9 59 5.9 MHz Maximum output output-swing swing bandwidth VO(PP) = 20 V, AVD = 1, RL = 2 kΩ, CL = 100 pF 668 668 kHz Phase margin at unity gain RL = 2 kΩ, CL = 100 pF 58° 58° POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 µV pA/√Hz 5–17 TLE2141, TLE2141A, TLE2141Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS SLOS062D – NOVEMBER 1990 – REVISED AUGUST 1994 electrical characteristics at specified free-air temperature, VCC± = ±15 V, TA = 25°C (unless otherwise noted) PARAMETER VIO IIO Input offset voltage IIB Input bias current VICR TEST CONDITIONS RS = 50 Ω, Ω VIC = 0, 0 VO = 0 Input offset current VOM + Maximum positive p peak p voltage M i ii p k output l g swing i g UNIT TYP MAX 200 1000 µV 7 100 nA – 0.7 – 1.5 µA – 15 to 13 – 15.3 to 13.2 IO = – 150 µA IO = – 1.5 A 13.8 14.1 13.7 14 IO = – 15 mA IO = 150 µA 13.3 13.7 – 14.7 – 14.9 – 14.5 – 14.8 – 13.4 – 13.8 100 450 V/mV RS = 50 Ω Common-mode p voltage g C d iinput l g range TLE2141Y MIN m V V VOM – M i Maximum negative g i peak p k output p voltage l g swing i g IO = 1.5 mA IO = 15 mA AVD Large-signal differential voltage amplification VO = ± 10 V V, ri Input resistance 65 MΩ ci Input capacitance 2.5 pF zo Open-loop output impedance 30 Ω 80 108 dB 85 106 dB – 25 – 50 20 31 RL = 2 kΩ f = 1 MHz CMRR Common-mode rejection ratio VIC = VICRmin, RS = 50 Ω kSVR Supply-voltage rejection ratio (∆VCC ± /∆VIO) VCC ± = ± 2.5 V to ± 15 V, RS = 50 Ω IOS Short-circuit output current VO = 0 VID = 1 V VID = – 1 V ICC Supply current VO = 0, No load 5–18 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 3.5 V mA 4.5 mA TLE2141, TLE2141A, TLE2141Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS SLOS062D – NOVEMBER 1990 – REVISED AUGUST 1994 TYPICAL CHARACTERISTICS Table of Graphs FIGURE VIO IIO Input offset voltage Distribution 1 Input offset current vs Free-air temperature 2 IIB Input bias current vs Free Free-air air temperature vs Common-mode input voltage 3 4 VOM + M i i i peakk output voltage l Maximum positive vs vs vs vs Supply voltage Free-air Free air temperature p current Output Settling time 5 6 7 9 VOM – M i Maximum negative i peakk output voltage l vs vs vs vs Supply voltage Free-air Free air temperature p current Output Settling time 5 6 8 9 VO(PP) VOH Maximum peak-to-peak output voltage vs Frequency High-level output voltage vs Output current 11 VOL Low-level output voltage vs Output current 12 AVD Large-signal differential voltage amplification vs Free Free-air air temperature vs Frequency 13 14 zo Closed loop output impedance vs Frequency 15 IOS Short-circuit output current vs Free-air temperature 16 CMRR Common-mode rejection ratio vs Frequency vs Free-air temperature 17 18 kSVR Supply-voltage rejection ratio vs Frequency vs Free-air temperature 19 20 ICC Supply current vs Free Free-air air temperature vs Supply voltage 21 22 VN VN Noise voltage vs Frequency 23 Noise voltage Over a 10-second period 24 In THD + N Noise current vs Frequency 25 Total harmonic distortion plus noise vs Frequency 26 Slew rate vs Free-air Free air temperature vs Load capacitance 27 28 Noninverting large signal vs Time 29 Inverting large signal vs Time 30 Small signal vs Time 31 Unity-gain bandwidth vs Load capacitance 32 Gain margin vs Load capacitance 33 Phase margin vs Load capacitance 34 Phase shift vs Frequency 14 SR P l response Pulse p B1 φm POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 10 5–19 TLE2141, TLE2141A, TLE2141Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS SLOS062D – NOVEMBER 1990 – REVISED AUGUST 1994 TYPICAL CHARACTERISTICS† INPUT OFFSET CURRENT vs FREE-AIR TEMPERATURE TLE2141 DISTRIBUTION OF INPUT OFFSET VOLTAGE 20 24 18 IIIO IO – Input Offset Current – nA Percentage of Units – % 20 236 Units Tested From 1 Wafer Lot VCC ± = ± 15 V TA = 25°C P Package 16 12 8 4 VO = 0 VIC = 0 16 14 12 10 VCC ± = ± 2.5 V 8 6 VCC ± = ± 15 V 4 2 0 – 800 0 – 400 400 0 – 75 – 50 – 25 0 25 50 75 100 125 150 TA – Free-Air Temperature – °C 800 VIO – Input Offset Voltage – µV Figure 1 Figure 2 INPUT BIAS CURRENT vs FREE-AIR TEMPERATURE INPUT BIAS CURRENT vs COMMON-MODE INPUT VOLTAGE –1000 0 VCC ± = ± 2.5 V – 0.2 – 900 – 800 VCC ± = ± 2.5 V – 700 VCC ± = ± 15 V – 600 uA IIIB IB – Input Bias Current – µA IIIB IB – Input Bias Current – nA VO = 0 VIC = 0 – 0.4 – 0.6 TA = 125°C – 0.8 TA = 25°C –1 TA = – 55°C –1.2 – 500 – 75 – 50 – 25 0 25 50 75 100 125 150 TA – Free-Air Temperature – °C –1.4 –3 0 0.5 – 2.5 – 2 –1.5 –1 – 0.5 VIC – Common-Mode Input Voltage – V Figure 3 Figure 4 † Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. 5–20 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1 TLE2141, TLE2141A, TLE2141Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS SLOS062D – NOVEMBER 1990 – REVISED AUGUST 1994 TYPICAL CHARACTERISTICS† MAXIMUM PEAK OUTPUT VOLTAGE vs FREE-AIR TEMPERATURE MAXIMUM PEAK OUTPUT VOLTAGE vs SUPPLY VOLTAGE 15 RL = 2 kΩ TA = 25°C 18 V OM – Maximum Peak Output Voltage – V V OM – Maximum Peak Output Voltage – V 24 12 VOM + 6 0 –6 VOM – –12 –18 3 6 9 12 15 18 21 14.6 RL = ∞ 14.2 VOM + 13.8 RL = 2 kΩ –13.8 –14.2 RL = 2 kΩ VOM – –14.6 RL = ∞ –15 – 75 – 50 – 25 0 25 50 75 100 125 150 TA – Free-Air Temperature – °C – 24 0 VCC ± = ± 15 V 24 VCC ± – Supply Voltage – V Figure 5 Figure 6 MAXIMUM NEGATIVE PEAK OUTPUT VOLTAGE vs OUTPUT CURRENT 14.6 VCC ± = ± 15 V 14.4 14.2 TA = 125°C 14 TA = 25°C TA = – 55°C 13.8 13.6 – 0.1 – 0.4 –1 –4 –10 – 40 –100 V OM – – Maximum Negative Peak Output Voltage – V V OM + – Maximum Positive Peak Output Voltage – V MAXIMUM POSITIVE PEAK OUTPUT VOLTAGE vs OUTPUT CURRENT –13.4 VCC ± = ± 15 V –13.6 –13.8 TA = 125°C –14 –14.2 TA = – 55°C –14.4 TA = 25°C –14.6 –14.8 – 15 0.1 0.4 IO – Output Current – mA 1 4 10 40 100 IO – Output Current – mA Figure 7 Figure 8 † Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 5–21 TLE2141, TLE2141A, TLE2141Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS SLOS062D – NOVEMBER 1990 – REVISED AUGUST 1994 TYPICAL CHARACTERISTICS† MAXIMUM PEAK-TO-PEAK OUTPUT VOLTAGE vs FREQUENCY VOM V OM – Maximum Peak Output Voltage – V 12.5 V O(PP) – Maximum Peak-to-Peak Output Voltage – V MAXIMUM PEAK OUTPUT VOLTAGE vs SETTLING TIME AVD = –1 VCC ± = ± 15 V TA = 25°C 10 7.5 0.1% 0.01% 5 2.5 Rising 0 Falling – 2.5 0.01% –5 0.1% –7.5 –10 –12.5 0 100 200 300 400 500 30 VCC ± = ± 15 V RL = 2 kΩ 25 TA = 25°C 20 TA = 125°C 15 10 TA = – 55°C 5 0 100 k 400 k ts – Settling Time – ns Figure 9 4M 10 M Figure 10 HIGH-LEVEL OUTPUT VOLTAGE vs OUTPUT CURRENT LOW-LEVEL OUTPUT VOLTAGE vs OUTPUT CURRENT 4.6 1400 VCC = 5 V VOL V OL – Low-Level Output Voltage – mV VCC = 5 V V OH – High-Level Output Voltage – V 1M f – Frequency – Hz 4.4 TA = 125°C 4.2 TA = 25°C 4 TA = – 55°C 3.8 3.6 1200 TA = 125°C 1000 800 600 TA = 25°C 400 200 TA = – 55°C 3.4 – 0.1 –1 –10 –100 0 0.1 IO – Output Current – mA 1 10 IO – Output Current – mA Figure 11 Figure 12 † Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. 5–22 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 100 TLE2141, TLE2141A, TLE2141Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS SLOS062D – NOVEMBER 1990 – REVISED AUGUST 1994 TYPICAL CHARACTERISTICS† LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION AND PHASE SHIFT vs FREQUENCY 140 AAVD VD – Large-Signal Differential Voltage Amplification – dB AAVD VD – Large-Signal Differential Voltage Amplification – dB VCC ± = ± 15 V VO = ± 10 V RL = 10 kΩ 120 RL = 2 kΩ 100 120 0° 110 20° 100 40° 90 60° 80 Phase Shift 80° 70 100° 60 140° 40 160° 30 180° VCC ± = ± 15 V RL = 2 kΩ CL = 100 pF TA = 25°C 20 10 0 200° 220° 240° – 10 80 1 – 75 – 50 – 25 0 25 50 75 100 125 150 TA – Free-Air Temperature – °C 10 100 1k 10 k 100 k f – Frequency – Hz Figure 13 260° 10 M SHORT-CIRCUIT OUTPUT CURRENT vs FREE-AIR TEMPERATURE 60 100 IOS – Short-Circuit Output Current – mA 30 Ω 10 1 AVD = 100 0.1 AVD = 10 AVD = 1 0.01 0.001 1k 1M Figure 14 CLOSED-LOOP OUTPUT IMPEDANCE vs FREQUENCY z o – Closed-Loop Output Impedance – Ω 120° AVD 50 Phase Shift LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION vs FREE-AIR TEMPERATURE 10 k 100 k 1M 10 M f – Frequency – Hz VCC ± = ± 15 V VO = 0 50 VID = 1 40 30 VID = – 1 20 – 75 – 50 – 25 0 25 50 75 100 125 150 TA – Free-Air Temperature – °C Figure 15 Figure 16 † Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 5–23 TLE2141, TLE2141A, TLE2141Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS SLOS062D – NOVEMBER 1990 – REVISED AUGUST 1994 TYPICAL CHARACTERISTICS† COMMON-MODE REJECTION RATIO vs FREQUENCY 120 VCC ± = ± 15 V TA = 25°C 120 CMRR – Common-Mode Rejection Ratio – dB CMRR – Common-Mode Rejection Ratio – dB 140 COMMON-MODE REJECTION RATIO vs FREE-AIR TEMPERATURE 100 80 60 40 20 0 100 1k 10 k 100 k VIC = VICRmin 116 112 108 VCC ± = ± 15 V 104 100 – 75 – 50 – 25 0 25 50 75 100 125 150 TA – Free-Air Temperature – °C 1M f – Frequency – Hz Figure 17 Figure 18 SUPPLY-VOLTAGE REJECTION RATIO vs FREQUENCY SUPPLY-VOLTAGE REJECTION RATIO vs FREE-AIR TEMPERATURE 110 kSVR k SVR – Supply-Voltage Rejection Ratio – dB kSVR k SVR – Supply-Voltage Rejection Ratio – dB 160 140 kSVR + 120 kSVR – 100 80 60 40 20 VCC ± = ± 2.5 V to ± 15 V TA = 25°C 0 10 k 10 100 1k VCC = 5 V 100 k 1M 10 M f – Frequency – Hz VCC ± = ± 2.5 V to ± 15 V 108 106 104 102 100 – 75 – 50 – 25 0 25 50 75 100 125 150 TA – Free-Air Temperature – °C Figure 19 Figure 20 † Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. 5–24 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 TLE2141, TLE2141A, TLE2141Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS SLOS062D – NOVEMBER 1990 – REVISED AUGUST 1994 TYPICAL CHARACTERISTICS† SUPPLY CURRENT vs FREE-AIR TEMPERATURE SUPPLY CURRENT vs SUPPLY VOLTAGE 4 3.8 VO = 0 No Load TA = 125°C VCC ± = ± 15 V IDD I CC – Supply Current – mA IIDD CC – Supply Current – mA 3.6 3.4 VCC ± = ± 2.5 V 3.2 3.5 TA = 25°C 3 TA = – 55°C 2.5 3 VO = 0 No Load 2.8 – 75 – 50 – 25 0 25 50 75 100 125 150 TA – Free-Air Temperature – °C 2 0 4 8 12 16 20 |VCC ±| – Supply Voltage – V Figure 21 Figure 22 INPUT NOISE VOLTAGE OVER A 10-SECOND PERIOD EQUIVALENT INPUT NOISE VOLTAGE vs FREQUENCY 750 250 VCC ± = ± 15 V f = 0.1 to 10 Hz TA = 25°C VCC ± = ± 15 V RS = 20 Ω 500 200 Input Noise Voltage – nV Vn – Equivalent Input Noise Voltage – nV/ Hz Vn 24 TA = – 55°C 150 TA = 125°C 100 TA = 25°C 50 250 0 – 250 – 500 – 750 0 1 10 100 1k 10 k 0 2 4 6 8 10 t – Time – s f – Frequency – Hz Figure 23 Figure 24 † Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 5–25 TLE2141, TLE2141A, TLE2141Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS SLOS062D – NOVEMBER 1990 – REVISED AUGUST 1994 TYPICAL CHARACTERISTICS† TOTAL HARMONIC DISTORTION PLUS NOISE vs FREQUENCY NOISE CURRENT vs FREQUENCY THD + N – Total Harmonic Distortion + Noise – % In – Noise Current – pA/ Hz 8 6 TA = – 55°C 4 TA = 25°C 2 TA = 125°C 0 1 10 100 1k 10 k 1% VO(PP) = 20 V VCC ± = ± 15 V TA = 25°C 0.1% AV = 10 RL = 600 Ω AV = 10 RL = 2 kΩ 0.001% 10 100 Figure 25 1k 10 k f – Frequency – Hz SLEW RATE vs LOAD CAPACITANCE 60 50 50 40 SR – Slew Rate – V/ µ s SR + 40 SR – 30 20 VCC ± = ± 15 V AVD = – 1 RL = 2 kΩ CL = 500 pF SR+ 30 20 SR – 10 VCC ± = ± 15 V AVD = – 1 TA = 25°C 0 – 75 – 50 – 25 0 25 50 75 100 125 150 TA – Free-Air Temperature – °C 0 0.01 Figure 27 0.1 1 CL – Load Capacitance – nF Figure 28 † Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. 5–26 100 k Figure 26 SLEW RATE vs FREE-AIR TEMPERATURE SR – Slew Rate – V/ µ s AV = 100 RL = 2 kΩ 0.01% f – Frequency – Hz 10 AV = 100 RL = 600 Ω POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 10 TLE2141, TLE2141A, TLE2141Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS SLOS062D – NOVEMBER 1990 – REVISED AUGUST 1994 TYPICAL CHARACTERISTICS† NONINVERTING LARGE-SIGNAL PULSE RESPONSE INVERTING LARGE-SIGNAL PULSE RESPONSE 15 15 TA = 125°C TA = 25°C 10 TA = 25°C 5 VO – Output Voltage – V VO VO – Output Voltage – V VO 10 TA = – 55°C 0 TA = – 55°C –5 TA = 25°C VCC ± = ± 15 V AVD = 1 RL = 2 kΩ CL = 300 pF –10 TA = – 55°C TA = 125°C 5 0 TA = 125°C VCC ± = ± 15 V AVD = –1 RL = 2 kΩ CL = 300 pF TA = 125°C –15 0 1 2 3 4 5 0 1 t – Time – µs 2 7 VCC ± = ± 15 V RL = 2 kΩ B1 B 1 – Unity-Gain Bandwidth – MHz TA = – 55°C 50 0 VCC ± = ± 15 V AVD = –1 RL = 2 kΩ CL = 300 pF TA = 25°C –100 400 5 UNITY-GAIN BANDWIDTH vs LOAD CAPACITANCE 100 0 4 Figure 30 SMALL-SIGNAL PULSE RESPONSE – 50 3 t – Time – µs Figure 29 VO – Output Voltage – mV VO TA = 25°C –5 –10 –15 TA = – 55°C 800 1200 1600 6 TA = 25°C 5 TA = 125°C 4 3 2 1 10 100 1000 10000 CL – Load Capacitance – pF t – Time – ns Figure 31 Figure 32 † Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 5–27 TLE2141, TLE2141A, TLE2141Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS SLOS062D – NOVEMBER 1990 – REVISED AUGUST 1994 TYPICAL CHARACTERISTICS† GAIN MARGIN vs LOAD CAPACITANCE 14 TA = – 55°C 8 6 TA = 125°C TA = 25°C 50° TA = 125°C 40° 30° 20° 4 2 10° TA = 25°C 0 10 TA = – 55°C 60° φ m – Phase Margin Gain Margin – dB 70° VCC ± = ± 15 V AVD = 1 RL = 2 kΩ to ∞ VO = – 10 V to 10 V 12 10 PHASE MARGIN vs LOAD CAPACITANCE 0° 10 10000 100 1000 CL – Load Capacitance – pF VCC ± = ± 15 V RL = 2 kΩ 100 1000 CL – Load Capacitance – pF Figure 33 10000 Figure 34 † Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. APPLICATION INFORMATION input offset voltage nulling The TLE2141 series offers external null pins that can be used to further reduce the input offset voltage. If this feature is desired, connect the circuit of Figure 35 as shown. If external nulling is not needed, the null pins may be left unconnected. IN + 3 2 IN – 5 OFFSET N2 + 6 OUT – 5 kΩ 1 OFFSET N1 1 kΩ VCC – (split supply) GND (single supply) Figure 35. Input Offset Voltage Null Circuit 5–28 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 IMPORTANT NOTICE Texas Instruments (TI) reserves the right to make changes to its products or to discontinue any semiconductor product or service without notice, and advises its customers to obtain the latest version of relevant information to verify, before placing orders, that the information being relied on is current. TI warrants performance of its semiconductor products and related software to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements. Certain applications using semiconductor products may involve potential risks of death, personal injury, or severe property or environmental damage (“Critical Applications”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, INTENDED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT APPLICATIONS, DEVICES OR SYSTEMS OR OTHER CRITICAL APPLICATIONS. Inclusion of TI products in such applications is understood to be fully at the risk of the customer. Use of TI products in such applications requires the written approval of an appropriate TI officer. Questions concerning potential risk applications should be directed to TI through a local SC sales office. In order to minimize risks associated with the customer’s applications, adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. TI assumes no liability for applications assistance, customer product design, software performance, or infringement of patents or services described herein. Nor does TI warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right of TI covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used. Copyright 1995, Texas Instruments Incorporated