SHANGHAI SUNRISE ELECTRONICS CO., LTD. KBPC15005 THRU KBPC1510 SINGLE PHASE SILICON BRIDGE RECTIFIER TECHNICAL SPECIFICATION VOLTAGE: 50 TO 1000V CURRENT: 15A FEATURES KBPC15 KBPC15W • Surge overload rating: 300A peak • High case dielectric strength • 1/4" universal fasten terminal • and φ.04" lead - wire available • High temperature soldering guaranteed: 250oC/10sec/0.375"(9.5mm) lead length at 5 lbs tension MECHANICAL DATA • Polarity: Polarity symbol marked on body • Mounting position: Hole thru for #8 screw • Case: metal or plastic Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Single-phase, half-wave, 60Hz, resistive or inductive load rating at 25oC, unless otherwise stated, for capacitive load, derate current by 20%) VDC KBPC KBPC KBPC KBPC KBPC KBPC KBPC 15005 1501 1502 1504 1506 1508 1510 50 100 200 400 600 800 1000 35 70 140 280 420 560 700 50 100 200 400 600 800 1000 IF(AV) 15 A IFSM 300 A VF 1.1 V 10.0 500 -55 to +150 µA µA RATINGS SYMBOL Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current (Tc=55oC) Peak Forward Surge Current (8.3ms single half sine-wave superimposed on rated load) Maximum Instantaneous Forward Voltage (at forward current 7.5A DC) Maximum DC Reverse Current Ta=25oC (at rated DC blocking voltage) Ta=100oC Storage and Operating Junction Temperature Note: Suffix "W" for wire type VRRM VRMS IR TSTG,TJ UNITS V V V o C http://www.sse-diode.com