SHANGHAI SUNRISE ELECTRONICS CO., LTD. D3SB10 THRU D3SB80 SINGLE PHASE GLASS PASSIVATED SIP BRIDGE RECTIFIER TECHNICAL SPECIFICATION VOLTAGE: 100 TO 800V CURRENT: 4.0A FEATURES D3-SB • Glass passivated junction chip • Ideal for printed circuit board • Reliable low cost construction utilizing molded plastic technique • Surge overload rating: 120 A peak • High temperature soldering guaranteed: 250oC/10sec/ 0.375" (9.5mm) lead length at 5 lbs tension MECHANICAL DATA • Terminal: Plated leads solderable per MIL-STD 202E, method 208C • Case: UL-94 Class V-O recognized flame retardant epoxy • Polarity: Polarity symbol marked on body • Mounting position: Any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Single-phase, half-wave, 60Hz, resistive or inductive load rating at 25oC, unless otherwise stated, for capacitive load, derate current by 20%) RATINGS SYMBOL Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current (Ta=50oC) VRRM VRMS VDC D3SB 10 100 70 100 D3SB 20 200 140 200 D3SB 40 400 280 400 D3SB 60 600 420 600 D3SB UNITS 80 800 V 560 V 800 V IF(AV) 4.0 A Peak Forward Surge Current (8.3ms single half sine-wave superimposed on rated load) IFSM 120 A Maximum Instantaneous Forward Voltage (at forward current 2.0A DC) VF 1.1 V 10 µA 500 µA Maximum DC Reverse Current (at rated DC blocking voltage) Ta=25oC o Ta=125 C Storage and Operating Junction Temperature IR TSTG,TJ -55 to + 150 o C http://www.sse-diode.com