SHANGHAI SUNRISE ELECTRONICS CO., LTD. DF005S THRU DF10S SINGLE PHASE GLASS PASSIVATED SURFACE MOUNT BRIDGE RECTIFIER TECHNICAL SPECIFICATION VOLTAGE: 50 TO 1000V CURRENT: 1.0A FEATURES DF-S • For surface mount application • Reliable low cost construction utilizing molded plastic technique • Surge overload rating: 50 A peak • High temperature soldering guaranteed: 250oC/10sec/ at terminals MECHANICAL DATA • Terminal: Plated leads solderable per MIL-STD 202E, method 208C • Case: UL-94 Class V-O recognized flame retardant epoxy • Polarity: Polarity symbol marked on body • Mounting position: Any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Single-phase, half-wave, 60Hz, resistive or inductive load rating at 25oC, unless otherwise stated, for capacitive load, derate current by 20%) RATINGS SYMBOL Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current VRRM VRMS VDC (Ta=40oC) Peak Forward Surge Current (8.3ms single half sine-wave superimposed on rated load) Maximum Instantaneous Forward Voltage (at forward current 1.0A) Maximum DC Reverse Current Ta=25oC (at rated DC blocking voltage) o Ta=125 C DF DF 005S 01S 50 100 35 70 50 100 DF 02S 200 140 200 DF 04S 400 280 400 DF 06S 600 420 600 DF DF UNITS 08S 10S 800 1000 V 560 700 V 800 1000 V IF(AV) 1.0 A IFSM 50 A VF 1.1 V 10.0 µA 500 µA 25 -55 to +150 pF IR CJ Typical Junction Capacitance (Note 1) Storage and Operating Junction Temperature TSTG,TJ Note: 1. Measured at 1.0 MHz and applied voltage of 4.0Vdc o C http://www.sse-diode.com