OVEN CONTROLLED CRYSTAL OSCILLATOR AOCJY1 Series ESD Sensitive Pb RoHS / RoHS II Compliant 20.8 x 13.2 x 8.2 mm | | | | | | | | | | | | | | APPLICATIONS: • Cellular Infrastructure • Radar Systems • Test & Measurement Equipment • GPS Tracking with precision hold-over accuracy • WiMax / WLAN FEATURES: • 20.8 x 13.2 x 8.2 mm Leaded- RoHS Compliant Reflow-able Package • AT-Cut, High “Q” resonator based design • Either Sinewave or CMOS RF output • Available with ±500 ppb over -40°C to +75°C operating temperature Range • Tighter Stabilities to ±50.0 ppb over 0°C to +50°C also available • Exceptional long-term Aging of ±3 ppm max. over 10-Year Product Life • Excellent close-in phase noise (-145 dBc/Hz Typical @1k Hz offset; 10MHz carrier) STANDARD SPECIFICATIONS: Parameters Minimum Typical Maximum Units Notes 100.00 MHz Overall Frequency range RF Output Frequency Standard Available Frequencies 10.00 10.00, 12.80, 13.00, 26.00, 38.88, 40.00, 100.00 MHz Waveform Level "1" (Logic High) Level "0" (Logic Low) Load Rise & Fall Time Duty Cycle Waveform Peak Power Output Load Short Term Stability Operable Temperature Range CMOS 0.9*Vdd 0.1*Vdd 15 6.0 55 45 Volts Volts pf ns % Sinewave 2.00 dBm Ω /second 50 -9 1x10 -40 75 ºC Alan Variance See Stability Options Frequency Stability Options 0º C to +50ºC ±50.00 ppb Defaul t Spec. -20º C to +70ºC ±200.00 p pb Opt ion “E” -40º C to +75ºC ±500.00 p pb Option “F” ±50.00 ppb ±500.00 ppb In < 3-minutes 2.00 1.00 3.46 Watts Watt Volts See Options ±500 ±3.00 ppb ppm ±50 ppb -35 dBc -90 -120 -145 -150 dBc / Hz dBc / Hz dBc / Hz dBc / Hz Vdd Volts ppm Frequency Stability vs. Supply Voltage (Vdd ± 5%) Warm-Up @ 25 ºC Power Consumption @ turn on Power Consumption Steady State Supply Voltage (Vdd) Aging Yearly 10-Years 3.13 3.30 Supply Voltage Variation Spectral Content Spurious Response Phase Noise (10MHz Carrier) @ 5V @ 10 Hz offset @ 100 Hz offset @ 1,000 Hz offset @ 10,000 Hz offset Electrical Frequency Adjustment Control Voltage Range (Vc) Frequency Pull Range Frequency Pull Slope Control Voltage Port Impedance Center Control Voltage Control Port Linearity Storage Temperature ABRACON IS IS ABRACON ISO9001:2008 CERTIFIED RTIFIED CE 0.0 ±5.00 VDD ± 5% change Positive 10 (Vdd/2) -0.5 -40 Vdd/2 ±10 (Vdd/2) +0.5 +100 kΩ Volts % ºC Visit www.abracon.com for Terms & Conditions of Sale Revised: 07.01.14 30332 E speranza, Rancho Santa Margarita, California 92688 tel 949-546-8000| fax 949-546-8001| www.abracon.com | OVEN CONTROLLED CRYSTAL OSCILLATOR AOCJY1 Series ESD Sensitive Pb RoHS / RoHS II Compliant 20.8 x 13.2 x 8.2 mm | | | | | | | | | | | | | | OPTIONS AND PART IDENTIFICATION (Left blank if standard) AOCJY1 - - MHz - - Supply Voltage Option Blank: 3.30V A: 5.00V RF Output Options Blank: CMOS SW: Sinewave Frequency in MHz Such as; 10.000 MHz 26.000 MHz 100.000 MHz Temperature Options E: -20°C to +70°C F *: -40°C to +75°C * For temp. option “F”, 100MHz is only available with CMOS output OUTLINE DIMENSIONS 7.80 Max Pin 7 Function Control Voltage GND 8 Output 14 Power Supply 1 ABRACON IS IS ABRACON ISO9001:2008 CERTIFIED RTIFIED CE Visit www.abracon.com for Terms & Conditions of Sale Revised: 07.01.14 30332 E speranza, Rancho Santa Margarita, California 92688 tel 949-546-8000| fax 949-546-8001| www.abracon.com | OVEN CONTROLLED CRYSTAL OSCILLATOR AOCJY1 Series ESD Sensitive Pb RoHS / RoHS II Compliant 20.8 x 13.2 x 8.2 mm | | | | | | | | | | | | | | REFLOW PROFILE: TS ma x to TL (Ramp-up Ra te) 3°C/se cond ma x. Prehe at Temperature Min. (TS Min.) 150°C Temperature Typica l (T S Typ.) 175°C Temperature Max. (TS Ma x.) 200°C Time (tS ) 60 ~ 180 s econds Ra mp-up ra te (TL to Tp ) 3°C/se cond ma x. Time Ma inta ine d Above: --Tempera ture (TL)/Time (TL) 217°C/60 ~ 150 s econds Pe ak Temperature (Tp) 250°C max. for 10 s e conds Targe t P ea k Tempe ra ture (Tp Targe t) 250°C +0/-5°C Time within 5°C of actua l pea k (tp) 20 ~ 40 se conds Ra mp-down Rate 6°C/se cond ma x. Tune 25°C to Pe ak Temperature (t) 8 minute s ma x. PACKAGING: (50) units per tray ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS IS ABRACON ISO9001:2008 CERTIFIED RTIFIED CE Visit www.abracon.com for Terms & Conditions of Sale Revised: 07.01.14 30332 E speranza, Rancho Santa Margarita, California 92688 tel 949-546-8000| fax 949-546-8001| www.abracon.com |