OVEN CONTROLLED CRYSTAL OSCILLATOR AOCJY2 Series Pb FEATURES: RoHS Compliant 21.0 x 21.0 x 11.0 mm | | | | | | | | | | | | | APPLICATIONS: • Cellular Infrastructure • Radar Systems • Test & Measurement Equipment • GPS Tracking with precision hold-over accuracy • WiMax / WLAN • 21.0 x 21.0 x 11.0 mm Leaded- RoHS Compliant Reflow-able Package • SC-Cut, High “Q” resonator based design • Either Sinewave or CMOS RF output • Available with ±30 ppb over -40°C to +75°C operating temperature range • Tighter Stabilities to ±5.0 ppb over 0°C to +50°C also available • Exceptional long-term Aging of ±500 ppb max. over 10-Year Product Life • Excellent close-in phase noise (-140 dBc/Hz Max. @100Hz offset; 10MHz carrier) STANDARD SPECIFICATIONS: Parameters Minimum Typical Maximum Units RF Output Frequency Standard Available Frequencies Waveform Level "1" (Logic High) 10.00 100.00 MHz 10.00, 12.80, 13.00, 26.00, 38.88, 40.00, 100.00 MHz 0.9*Vdd Volts 0.1*Vdd Load 15 Volts pf Rise & Fall Time 45 Waveform Peak Power Overall Frequency range CMOS Level "0" (Logic Low) Duty Cycle Notes 6.0 ns 55 % Sinewave 2.00 Output Load dBm 50 -10 2x10 Short Term Stability Operable Temperature Range -40 Ω /second 75 ºC Alan Variance See Stability Options ±5.00 ppb Default Spec. ±10.00 ppb Option “E” ±30.00 ppb Option “F” ±5.00 ppb ±5.00 ppb ±100.00 ppb 3.00 Watts 1.00 3.46 Watts Volts Frequency Stability Options 0º C to +50ºC (Note #1) -20º C to +70ºC -40º C to +75ºC Frequency Stability vs. Supply Voltage (Vdd ± 5%) Frequency Stability vs. Load Variation (± 10%) Warm-Up @ 25 ºC Power Consumption @ turn on Power Consumption Steady State Supply Voltage (Vdd) Note #1: ABRACON IS IS ABRACON ISO9001:2008 CERTIFIED RTIFIED CE 3.13 3.30 In < 3-minutes See Options ±5.00 ppb stability is only available for F0 < 40MHz. For frequencies above 40MHz, the best available frequency stability is ±10.00 ppb over -20°C to +70°C Visit www.abracon.com for Terms & Conditions of Sale Revised: 12.01.10 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com | | OVEN CONTROLLED CRYSTAL OSCILLATOR AOCJY2 Series Pb RoHS Compliant 21.0 x 21.0 x 11.0 mm | | | | | | | | | | | | | | | STANDARD SPECIFICATIONS - continued. Parameters Aging Minimum Typical Maximum Units Daily ±1.0 ppb First Year ±100 ppb 10-Years ±500 ppb Spectral Content Spurious Response Phase Noise (10MHz Carrier) @ 5V -35 dBc @ 1 Hz offset -90 dBc @ 10 Hz offset -120 dBc @ 100 Hz offset -140 dBc @ 1,000 Hz offset -145 dBc -150 dBc Vdd Volts @ 10,000 Hz offset Electrical Frequency Adjustment Control Voltage Range (Vc) 0.0 Frequency Pull Range ±0.70 ppm Frequency Pull Slope Positive Control Voltage Port Impedance 10 Center Control Voltage Notes kΩ Control Voltage Port Impedance Center Control Voltage (Vdd/2) -0.5 Vdd/2 (Vdd/2) +0.5 Volts Reference Voltage (Vdd=3.3V) 2.70 2.80 2.90 Volts Output @ Pin#5 Reference Voltage (Vdd=5.0V) Storage Temperature 4.40 4.50 4.60 Volts Output @ Pin#5 +100 ºC -40 OPTIONS AND PART IDENTIFICATION (Left blank if standard) AOCJY2 - - Supply Voltage Option Blank 3.30V A 5.00 V Frequency in MHz Such as; 10.000 MHz 26.000 MHz 100.000 MHz MHz - - Temperat ure Options E -20°C to +70°C F -40°C to +75°C RF Output Option s Blank CMOS SW Sinewave ±5.00 ppb stability is only available for F0 < 40MHz. For frequencies above 40MHz, the best available frequency stability is ±10.00 ppb over -20°C to +70°C ABRACON IS IS ABRACON ISO9001:2008 CERTIFIED RTIFIED CE Visit www.abracon.com for Terms & Conditions of Sale Revised: 12.01.10 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com OVEN CONTROLLED CRYSTAL OSCILLATOR AOCJY2 Series Pb RoHS Compliant 21.0 x 21.0 x 11.0 mm | | | | | | | | | | | | | | | OUTLINE DIMENSIONS 21.00 mm Max. PACKAGING:(20) units per tray REFLOW PROFILE: TS max to TL (Ramp-up Rate) 3°C/second max. Preheat Temperature Min. (TS Min.) 150°C Temperature Typical (T S Typ.) 175°C Temperature Max. (TS Max.) 200°C Time (tS) 60 ~ 180 seconds Ramp-up rate (TL to Tp ) 3°C/second max. Time Maintained Above: --Temperature (TL)/Time (TL) 217°C/60 ~ 150 seconds Peak Temperature (Tp) 250°C max. for 10 seconds Target Peak Temperature (Tp Target) 250°C +0/-5°C Time within 5°C of actual peak (tp) 20 ~ 40 seconds Ramp-down Rate 6°C/second max. Tune 25°C to Peak Temperature (t) 8 minutes max. ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS IS ABRACON ISO9001:2008 CERTIFIED RTIFIED CE Visit www.abracon.com for Terms & Conditions of Sale Revised: 12.01.10 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com