ARCH PSF60-42S

VER : PA_0
update : 2012.03.09
LED Power
PSF60 SERIES
60 Watts
KEY FEATURES
„
„
„
„
„
„
„
„
„
Fully Isolated Plastic Case with IP65/67 Level
Suitable for Dry / Damp / Wet / Locations
Universal Input: 100-277 VAC
Bulit-in Active PFC Function
High Efficiency up to 90%
Free Air Convection
High Reliability
With Constant Current & Constant Voltage
Output Voltage and Constant Current Level can Be
Adjusted Through Internal Potential Meter
„ LED Power Application
„ Super Small Size: 4.0 x 1.8 x 1.45 Inches
„ 3-Years Product Warranty
ELECTRICAL SPECIFICATIONS
All specifications valid at normal input voltage, full load and +25°C after warm-up time unless otherwise stated.
Model No.
PSF60-13.5S
Max output wattage
(W)
Voltage
Input
Output
Protection
Isolation
(Note2)
Physical
PSF60-28S
PSF60-42S
PSF60-54S
90-295 VAC
Frequency (Hz)
50 / 60 Hz
Power factor
PF>0.9 at Full load (115 VAC / 230 VAC)
Current (Full load)
0.8A max. (115 VAC) / 0.4A max. (230 VAC)
Inrush current
50 A max. (Cold Start at 230 VAC)
Leakage Current
< 0.7 mA max at 240 VAC
Voltage (V.DC.)
13.5V
24V
28V
42V
54V
Constant Current Operation Voltage (max)
(CC Mode) (Note3)
11~13.5
VDC
18~ 24
VDC
21~28
VDC
33.5~ 42
VDC
38~54
VDC
Voltage Tolerance
±10%
Preset Current (mA) (CC Mode)
Current Adjustment Range (mA)
(CC Mode)
Minimum Load (mA)
4200
2400
2100
1400
1050
3570~4200
1700~2500
1400~2100
1100~1400
700~1100
3570
1700
1400
1100
700
Line Regulation (100-270VAC) (typ.)
±4%
Load Regulation (Min-Max) (typ.)
±5%
Ripple & Noise (max)
4Vp-p
4.5Vp-p
5Vp-p
5Vp-p
5Vp-p
Efficiency (at 230VAC.)(typ)
85%
88%
89%
89%
90%
Over current protection
Auto recovery
Over voltage protection
Zener diode clamp
Short circuit protection
Auto recovery
Input-Output (V.AC)
3750V
Input-FG
(V.AC)
1880V
Output-FG
.(V.AC)
Operating temperature
Environment
PSF60-24S
60W
500V
-30°C…+70°C (with derating)
Storage temperature
-40°C…+85°C
Temperature coefficient
0.02%/°C
Humidity
95% RH
MTBF
>583,000 h @ 25°C (MIL-HDBK-217F)
Dimension (L x W x H)
4.0 x 1.8 x 1.45 Inches
Weight
(101.6 x 45.7 x 36.8 mm ) Tolerance ±0.5 mm
g
Cooling method
Free air convection
Safety
Agency Approvals
UL8750、IEC / EN 61347-2-13、 IEC / EN 61347-1
EN 55015
(Pending)
EMC
EMI
(Conducted & Radiated Emission)
EMS (Noise Immunity)
EN 61547
(Pending)
Harmonic Current
EN 61000-3-2(at Full Load)、EN 61000-3-3
Surge
2KV L-L, 4KV L-E
http://www.archcorp.com.tw
TEL: +886-2-26989508 FAX: +886-2-26981319
(Pending)
(Pending)
-1-
VER : PA_0
update : 2012.03.09
LED Power
PSF60 SERIES
60 Watts
Note:
1. Ripple & Noise are measured at 20MHz of bandwidth with 0.1uF & 47uF parallel capacitor.
2. Please check the derating curve for more details.
3. Input Voltage=115 or 230 VAC。This is the suitable operation region for LED related application.but please reconfirm special electrical requirements
for some specific ststem design.
MECHANICAL DIMENSION
( Top View )
DERATING
BLOCK DIAGRAM
http://www.archcorp.com.tw
TEL: +886-2-26989508 FAX: +886-2-26981319
-2-