BeRex BG16C 5-4000 MHz Cascadable InGaP HBT Gain Block Device Features 28.5dBm Output IP3 at 3dBm/tone at 900MHz 17.0dB Gain at 900MHz 16.0dBm P1dB at 900MHz Highly Reliable InGaP/GaAs HBT Technology Temperature Compensation Circuit patent SOT-89 Surface Mount Package 50 ohm Cascadable Lead-free/Green/RoHS compliant Application: commercial, space, military wireless system Electrical Specifications (Ta = 25C, Vs = 5.0V) Parameters Test Conditions Frequency Range Gain S11 S22 OIP3 P1dB Icc Vcc dG/dT Rth 500 MHz 900 MHz 1900 MHz 2450 MHz 500 MHz 900 MHz 1900 MHz 2450 MHz 500 MHz 900 MHz 1900 MHz 2450 MHz 500 MHz 900 MHz 1900 MHz 2450 MHz 500 MHz 900 MHz 1900 MHz 2450 MHz Vcc = 5.0V Min 5 16.2 16.0 15.0 14.3 26.5 26.5 26.0 25.5 14.6 15.0 14.5 14.0 35 Typ 17.2 17.0 16.0 15.3 -15.0 -21.0 -22.0 -20.0 -32.0 -45.0 -16.0 -15.0 28.5 28.5 28.0 27.5 15.6 16.0 15.5 15.0 42 5.0 -0.004 50 Max Unit 4000 18.2 18.0 17.0 16.3 MHz dB dB dB dBm dBm 50 mA V dB/C C/W Test conditions unless otherwise noted. 1. Device performance is measured on BeRex evaluation board at 25C, 50 ohm system. 2. OIP3 measured with two tones at an output power of 3dBm/tone separated by 1MHz. http: //www.berex.com BeRex BG16C Absolute Maximum Ratings Parameters Rating Operating Case temperature Storage Temperature Junction Temperature Operating Voltage Supply Current Input RF Power -40 to +85C -55 to +155C +220C 6.5V 120mA 23dBm Operation of this device above any of these parameters may result in permanent damage. [I-V Characteristics] [Generic SOT89 Evaluation Board] BeRex Evaluation Board MMIC Innovator *Dielectric constant is 4.2 *RF pattern width 52mil *31mil thick FR4 PCB Application Circuit: 5 - 4000 MHz Schematic Diagram C3 C4 BOM C5 +5V L1 RFin C2 C1 BG16C RFout Tolerance C1 100pF ±5% C2 100pF ±5% C3 100pF ±5% C4 1000pF ±5% C5 10uF ±20% *L1 33nH 5% *Note: Less than 20nH improves RF performance at frequencies over 1.9GHz. 40nH or higher value L1 improves RF performance at frequencies under 500MHz. Optimum value of L1 may vary with board design. http: //www.berex.com BeRex BG16C Typical Device Data S-parameters (Vc=5V, Ic=40mA, T=25C) S-Parameter (Vdevice = 5.0V, Icc = 40mA, T = 25 C, measured on a BeRex evaluation board) Freq [MHz] 100.00 500.00 1000.00 1500.00 2000.00 2500.00 3500.00 4000.00 S11 Mag 0.718 0.177 0.07 0.0499 0.0932 0.103 0.128 0.0679 S11 Ang -45.3 -148 120 14.8 -82 -131 159 127 S21 Mag 5.28 7.42 7.16 6.82 6.34 5.79 5.2 4.86 S21 Ang -144 122 50.8 -16.6 -83.7 -147 86.9 23.9 S12 Mag 0.0499 0.0907 0.0913 0.0911 0.0885 0.0905 0.0886 0.0941 S12 Ang 71.1 -31.8 -89.4 -143 164 118 14.7 -35.6 S22 Mag 0.78 0.119 0.0247 0.104 0.166 0.177 0.155 0.122 S22 Ang 133 72.7 -127 -159 -177 149 92.2 37.3 http: //www.berex.com BeRex BG16C Typical Performance (Vc = 5V, Ic = 40mA, Ta = 25C) Freq MHz 500 900 1900 2140 S21 dB 17.2 17.0 16.0 15.7 S11 dB -17 -22 -24 -20 S22 dB -23 -29 -17 -16 P1 dBm 15.6 16.0 15.5 15.5 OIP3 dBm 28.5 28.5 28.0 28.0 NF dB 4.9 4.5 4.6 4.6 2450 15.3 -16 -15 15.0 27.5 4.7 3000 14.7 -15 -14 14.4 27.0 4.7 3500 14.4 -19 -13.9 12.7 25 4.7 Typical Performance (V device = 4.7 V, Ic = 34 mA, Ta = 25 ℃) Freq S21 S11 S22 P1 OIP3 NF MHz dB dB dB dBm dBm dB 70 19.6 -11.8 -5.9 13.8 25.5 4.9 500 17.0 -29.8 -13.9 13.3 23.5 4.9 900 16.8 -24.6 -15.8 12.9 24.5 4.5 1900 15.7 -18.8 -13.5 13.6 25 4.6 2140 15.4 -16.9 -12.3 13.1 24 4.6 Typical Performance (V device = 4.5 V, Ic = 29 mA, Ta = 25 ℃) Freq MHz 70 500 900 1900 2140 S21 dB 19.4 16.8 16.3 15.4 15.2 S11 dB -13.1 -25.2 -24.3 -18.2 -16.3 S22 dB -5.7 -13.1 -14.7 -12.7 -11.6 P1 dBm 13.3 12.8 11.8 12.0 12.2 OIP3 dBm 23.5 23.5 22.0 20.0 22.0 4.9 4.5 4.6 4.6 NF dB 4.9 2450 15.1 -18.9 -13.1 13.5 24.5 4.7 3500 14.2 -18.1 -13.4 11.9 23.5 4.7 2450 14.8 -18.1 -12.5 13.0 22.0 4.7 3500 14 -17.1 -12.9 11.4 22.0 4.7 http: //www.berex.com BeRex BG16C WCDMA 4FA 2140 -60dBc WCDMA 6FA 2140 -60dBc http: //www.berex.com BeRex BG16C ACLR Device Performance Pin-Pout-Gain 900MHz, 5V/40mA 1900 MHz, 5V/40mA http: //www.berex.com BeRex BG16C OIP3 http: //www.berex.com BeRex BG16C ACPR Gain Flatness http: //www.berex.com BeRex BG16C Package Outline Dimension Suggested PCB Land Pattern and PAD Layout PCB Land Pattern PCB Mounting 0.40 1.30 0.40 Ø0.40 0.40 0.75 1.20 2.00 1.20 0.50 1.20 1.20 2.80 1.50 1.00 0.65 Note : All dimension are in millimeters Visit http://www.berex.com for PCB layout http: //www.berex.com BeRex BG16C Tape & Reel Packaging information: SOT89 Tape Width (mm): 12 Reel Size (inches): 7 Device Cavity Pitch (mm): 8 Devices Per Reel: 1000 Lead plating finish 100% Tin Matte finish. (All BeRex products undergoes a 1 hour, 150 degree C, Anneal bake to eliminate thin whisker growth concerns) MSL / ESD Rating ESD Rating: Value: Test: Standard: Class 2 Passes <4000V Human Body Model (HBM) JEDEC Standard JESD22-A114B MSL Rating: Standard: Level 1 at +265C convection reflow JEDEC Standard J-STD-020 NATO CAGE code: 2 N 9 6 F NOTICE BeRex Corporation reserves the right to make changes of product specification or to discontinue product at any time without notice. http: //www.berex.com